Page 1 of 1
Outside oil line
Posted: Tue Jul 09, 2019 6:29 am
by Cambin
Outside oil line
Re: Outside oil line
Posted: Tue Jul 09, 2019 6:35 am
by Cambin
I was just finishing putting the last few bits back on my new engine when I discovered that the outside oil line was dodgy so I looked at my other engines oiler and copied it
It is a 1/2” copper fitting a bit of pipe and a plate
And this is how it came out
Re: Outside oil line
Posted: Tue Jul 09, 2019 7:54 am
by Jim Eubanks
Even if this is what appears to be a right hand drive Starter, rotation is the other way so it would appear your pick up is backwards?
Re: Outside oil line
Posted: Tue Jul 09, 2019 8:11 am
by John Warren
Cameron, Nice job I am sure it w ill work great.
Re: Outside oil line
Posted: Tue Jul 09, 2019 8:26 am
by Cambin
Take time to think about that john if I crank an engine clock wize and if you look at the hogshead right the out let of my oil line is end close wize I think it’s the correct way
Cam
Re: Outside oil line
Posted: Tue Jul 09, 2019 8:26 am
by Cambin
Sorry jim
Re: Outside oil line
Posted: Tue Jul 09, 2019 9:58 pm
by Dennis_Brown
Looks correct, the starter hangs on the left from the drivers seat and rotation throws oil over the top toward the top of starter and the picture shows the starter mount holes for the left forward Side .