New Day Timer brush?
Posted: Mon Jan 19, 2026 6:35 pm
I think, some how my New Day timer brush got bent some how when it was disconnected while I was lightly hand cranking the engine by hand.
Page 1 of 1
Re: New Day Timer brush?
Posted: Mon Jan 19, 2026 6:47 pm
Here are a couple of images of the brush
Re: New Day Timer brush?
Posted: Mon Jan 19, 2026 6:52 pm
I think I've answered my own question by an earlier photo that I took of my timer's brush two weeks ago.
Re: New Day Timer brush?
Posted: Thu Jan 22, 2026 1:39 pm
One photo shows a bent brush. The next one is not a factory brush.
Re: New Day Timer brush?
Posted: Thu Jan 22, 2026 2:22 pm
Strange.Never saw that before. How about a photo of the front and back of your cap....I'm curious if you have an original or a repop. If the latter, there are good ones and bad ones and it is important to know the difference.
An original cap is brown and there is a small square hole in each of the contacts (see photo) - anything else is a repop.
If you need to replace the brush, avoid the $10 ones sold by Snyders....they won't last as long as those sold by Tip Top timers and included in the kits sold by most vendors.
An original cap is brown and there is a small square hole in each of the contacts (see photo) - anything else is a repop.
If you need to replace the brush, avoid the $10 ones sold by Snyders....they won't last as long as those sold by Tip Top timers and included in the kits sold by most vendors.