Page 1 of 1
Steering Bracket Hardware
Posted: Sun Jan 06, 2019 4:07 pm
by Ben Umberger
Putting a 14 back together, putting in the long bolt on the steering bracket (through the wood block), am I correct that there is no washer involved?
Thanks
Ben
Re: Steering Bracket Hardware
Posted: Sun Jan 06, 2019 5:10 pm
by Duey_C
The 25 Service Manual does not mention nor show a washer. Pages 35 & 36. But you did ask about a 14.
Hope this helps!
Re: Steering Bracket Hardware
Posted: Mon Jan 07, 2019 6:15 pm
by Allan
Ben, no need for a washer. The bolt head is p against the frame and the nut against the bracket.
Hope this helps,
Allan from down under.