Page 1 of 1
1926 Model TT
Posted: Fri Jul 26, 2019 12:30 pm
by Zeppy
I have picked up my Rapid Hand Hoist from the sandblaster. The frame and dump bed cleaned up really nice. I have a little metal work to do before I paint the bed black.
Re: 1926 Model TT
Posted: Fri Jul 26, 2019 12:34 pm
by Zeppy
Re: 1926 Model TT
Posted: Fri Jul 26, 2019 11:25 pm
by mvweaver
That’s going to be a neat little truck when done!
Re: 1926 Model TT
Posted: Sun Jul 28, 2019 1:48 am
by Matt in California
I like your dump truck!
I see that you got your TT in the garage. I need to know how tall a TT is. Would you mind measuring the minimum clearance needed to get through the door?
Thanks!
Matt
Re: 1926 Model TT
Posted: Sun Jul 28, 2019 7:36 am
by Dallas Landers
Very nice! Does it have aux trans? If so was the frame lengthened?
Re: 1926 Model TT
Posted: Mon Jul 29, 2019 4:12 pm
by Zeppy
Dallas Landers wrote: ↑Sun Jul 28, 2019 7:36 am
Very nice! Does it have aux trans? If so was the frame lengthened?
It does not have an aux trans. It does have a two speed rear-end.
Re: 1926 Model TT
Posted: Mon Jul 29, 2019 4:12 pm
by Zeppy
Matt in California wrote: ↑Sun Jul 28, 2019 1:48 am
I like your dump truck!
I see that you got your TT in the garage. I need to know how tall a TT is. Would you mind measuring the minimum clearance needed to get through the door?
Thanks!
Matt
Matt, I can measure it when I get home.
Re: 1926 Model TT
Posted: Tue Jul 30, 2019 12:55 am
by Burger in Spokane
My stock 26 TT flatbed with closed cab measures exactly 84" to the highest point,
at the back of the cab.
Re: 1926 Model TT
Posted: Tue Jul 30, 2019 3:47 pm
by Zeppy
Burger in Spokane wrote: ↑Tue Jul 30, 2019 12:55 am
My stock 26 TT flatbed with closed cab measures exactly 84" to the highest point,
at the back of the cab.
26 731 2016 aug 01.jpg
That is what mine also measures. By the way great looking TT.
Re: 1926 Model TT
Posted: Tue Jul 30, 2019 3:57 pm
by Henry K. Lee
Nice dump truck Joe!!!!
Re: 1926 Model TT
Posted: Tue Jul 30, 2019 6:02 pm
by Angmar
Great dump truck and hoist. Thanks for sharing.