Hand brake question
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 333
- Joined: Sat Jan 19, 2019 7:44 pm
- First Name: Bill
- Last Name: Elliott
- * REQUIRED* Type and Year of Model Ts owned: 1916 Model T Touring
- Location: Michigan
- MTFCA Number: 52438
- MTFCI Number: 22121
- Board Member Since: 2006
Hand brake question
Does anyone know where I can purchase the correct size woodruff key that holds the emergency brake lever onto the assembly shaft?
-
- Posts: 3299
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: '23 cutoff, '25 touring, '27 touring
- Location: North Central FL
- MTFCA Number: 4838
- MTFCI Number: 115
- Board Member Since: 2000
- Contact:
Re: Hand brake question
Bill
Lots of choices, any good hardware store, or on-line fastener companies
That part is T-3457, Handbrake lever key, (1909-1917) its a common #9 Woodruff half moon key.
From Fastenal:
No. 9 , 3/16" W x 3/4" L , 1035 Steel, Half Moon Woodruff Key
Lots of choices, any good hardware store, or on-line fastener companies
That part is T-3457, Handbrake lever key, (1909-1917) its a common #9 Woodruff half moon key.
From Fastenal:
No. 9 , 3/16" W x 3/4" L , 1035 Steel, Half Moon Woodruff Key
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
-
Topic author - Posts: 333
- Joined: Sat Jan 19, 2019 7:44 pm
- First Name: Bill
- Last Name: Elliott
- * REQUIRED* Type and Year of Model Ts owned: 1916 Model T Touring
- Location: Michigan
- MTFCA Number: 52438
- MTFCI Number: 22121
- Board Member Since: 2006
Re: Hand brake question
Thanks, Dan!