Special Spring for Watts Clutch?

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
User avatar

Topic author
CudaMan
Posts: 2385
Joined: Fri Jan 04, 2019 4:17 pm
First Name: Mark
Last Name: Strange
* REQUIRED* Type and Year of Model Ts owned: 1924 Cut Off Touring (now a pickup)
Location: Hillsboro, MO
MTFCA Number: 30944
MTFCI Number: 23667
Board Member Since: 2013

Special Spring for Watts Clutch?

Post by CudaMan » Mon Aug 12, 2019 10:20 am

Hello, I have a set of Watts clutch disks, but I understand that the Watts clutch uses a special, stiffer than stock spring.

Does anyone know the specs of that special spring? X pounds at an installed height of Y inches? or Z% stiffer than the stock Ford spring?

Thanks :)
Mark Strange
Hillsboro, MO
1924 Cut-off Touring (now a pickup)

User avatar

Mark Gregush
Posts: 4957
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
MTFCA Number: 52564
Board Member Since: 1999

Re: Special Spring for Watts Clutch?

Post by Mark Gregush » Mon Aug 12, 2019 10:35 am

I am pretty sure it is 110-115 at 2 inches. I did a little searching and all I could find was it had a higher rate then normal. I think normal rate for Ford is about 90 at 2 inches. The stack height of the disks will be the same as stock, 1-1/8" with large Ford disk on top and bottom.
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup


R.V.Anderson
Posts: 680
Joined: Tue Jan 08, 2019 6:01 pm
First Name: R.V.
Last Name: Anderson
* REQUIRED* Type and Year of Model Ts owned: 1914, 1920, 1923, 1923
Location: Kennedy, NY

Re: Special Spring for Watts Clutch?

Post by R.V.Anderson » Mon Aug 12, 2019 10:38 am

Mark is correct. Chaffin's makes the heavier spring.


Les Schubert
Posts: 1311
Joined: Thu Jan 10, 2019 5:47 pm
First Name: Les
Last Name: Schubert
* REQUIRED* Type and Year of Model Ts owned: 27 roadster 13 touring
Location: Calgary

Re: Special Spring for Watts Clutch?

Post by Les Schubert » Mon Aug 12, 2019 11:00 am

Can you still buy the Watts clutch? I had one in a speedster years ago and really really liked it. I figure it helped “preserve “ the rear axle gears!

User avatar

Topic author
CudaMan
Posts: 2385
Joined: Fri Jan 04, 2019 4:17 pm
First Name: Mark
Last Name: Strange
* REQUIRED* Type and Year of Model Ts owned: 1924 Cut Off Touring (now a pickup)
Location: Hillsboro, MO
MTFCA Number: 30944
MTFCI Number: 23667
Board Member Since: 2013

Re: Special Spring for Watts Clutch?

Post by CudaMan » Mon Aug 12, 2019 11:38 am

I think R.V. Anderson is tooling up to produce them again. The one I have is an original set I bought on Ebay years ago. I see there is another original set of clutch disks on Ebay right now.

I think I'll order the stiffer spring from Chaffin's today so that I have it ready if/when I install my Watts clutch disks. :)
Mark Strange
Hillsboro, MO
1924 Cut-off Touring (now a pickup)


hah
Posts: 107
Joined: Sun Jan 06, 2019 1:57 pm
First Name: john
Last Name: hardiman
* REQUIRED* Type and Year of Model Ts owned: 26 coupe
Location: stoughton, ma

Re: Special Spring for Watts Clutch?

Post by hah » Mon Aug 12, 2019 2:25 pm

Is this stiffer spring only limited to watts clutch?


Chaffins
Posts: 329
Joined: Mon Jan 07, 2019 5:44 pm
First Name: Herbert
Last Name: Chaffin
* REQUIRED* Type and Year of Model Ts owned: 1909 touring, 1911 touring, 1913 roadster, 1914 touring
Location: Corona, California
MTFCA Number: 227
MTFCA Life Member: YES

Re: Special Spring for Watts Clutch?

Post by Chaffins » Mon Aug 12, 2019 3:37 pm

Our new Clutch Spring has a force of 110-115 lbs at 2 inches. It can be used with any Ford clutch set up. Glen


R.V.Anderson
Posts: 680
Joined: Tue Jan 08, 2019 6:01 pm
First Name: R.V.
Last Name: Anderson
* REQUIRED* Type and Year of Model Ts owned: 1914, 1920, 1923, 1923
Location: Kennedy, NY

Re: Special Spring for Watts Clutch?

Post by R.V.Anderson » Mon Aug 12, 2019 6:03 pm

Mark S: I am currently making the Watts style clutch.

rvmodeltATnetsyncDOTnet

Post Reply Previous topicNext topic