Mike Kosser's new tool
Posted: Tue Oct 22, 2019 11:06 pm
Did anyone take a picture? Did anyone like it? I would like to know what it is. Thank you
Page 1 of 1
Re: Mike Kosser's new tool
Posted: Wed Oct 23, 2019 2:15 pm
If Mike has made a new anything I want to know about it so if anyone knows what it is Please let us know!
Re: Mike Kosser's new tool
Posted: Wed Oct 23, 2019 2:28 pm
The tool Mike displayed at Hershey is a version of the coil points adjusting 'hammer' you see in the ford service manuals. It is laser or plasma cut from steel plate. There may be other 'tools' and there is ongoing controversy if you read earlier posts. I have no affiliation with Mike K or any products offered. jb
Re: Mike Kosser's new tool
Posted: Fri Oct 25, 2019 4:59 pm
Dave: I have a drawing of the tool, cannot post any pictures since the neighbor's third grader isn't home yet. Nice combination in one tool to adjust coil top hardware. Thanks again Mike. This tool eliminates two problems.... The larger squared handle with covering prevents turning in use, and prevents loss of a second tool.
Re: Mike Kosser's new tool
Posted: Sat Oct 26, 2019 1:22 am
Pictures and dimensions would help those of us who might desire to make one of our own.
Re: Mike Kosser's new tool
Posted: Sat Oct 26, 2019 1:58 am
https://www.modeltford.com/item/5008AH.aspx
Without seeing it only thing I could think of is, a slot for adjusting the cushion spring was added at end of handle to make it different from what is currently sold. A wide slot might do both old and new style points.
https://www.modeltford.com/item/5008CST.aspx
I bet for many of us a small hammer, screw driver and the cushion spring tool works just fine.
Without seeing it only thing I could think of is, a slot for adjusting the cushion spring was added at end of handle to make it different from what is currently sold. A wide slot might do both old and new style points.
https://www.modeltford.com/item/5008CST.aspx
I bet for many of us a small hammer, screw driver and the cushion spring tool works just fine.
Re: Mike Kosser's new tool
Posted: Sat Oct 26, 2019 8:26 am
Here is a link showing the tool. I believe the rules permit me to share a link. I received over 40 signatures on the petition to revoke the Vendor Discussion rule at Hershey.
The rule presently prohibits vendors from posting photos, detailed descriptions or discussions of their creations here on the forum. Hopefully 40 MTFCA member signatures will be sufficient to convey the message there are many members who would like the rule revoked. That's about 10 times the number who believe the rule improves the forum that I am aware of.
https://www.facebook.com/groups/Fordmod ... /?sfnsn=mo
Folks with a plasma cutter, water jet or LASER cutter can make their own but will have to email me for the dimensions because I am prohibited from sharing a dimensional drawing by the rule. Others will be pleased to know it will soon be readily available.
The rule presently prohibits vendors from posting photos, detailed descriptions or discussions of their creations here on the forum. Hopefully 40 MTFCA member signatures will be sufficient to convey the message there are many members who would like the rule revoked. That's about 10 times the number who believe the rule improves the forum that I am aware of.
https://www.facebook.com/groups/Fordmod ... /?sfnsn=mo
Folks with a plasma cutter, water jet or LASER cutter can make their own but will have to email me for the dimensions because I am prohibited from sharing a dimensional drawing by the rule. Others will be pleased to know it will soon be readily available.
Re: Mike Kosser's new tool
Posted: Sat Oct 26, 2019 1:12 pm
I made this off a [nice] knife for adjusting thecushion spring .
Re: Mike Kosser's new tool
Posted: Sat Oct 26, 2019 1:45 pm
Re: Mike Kosser's new tool
Posted: Sat Oct 26, 2019 5:36 pm
Here’s mine, with a custom grip!
Re: Mike Kosser's new tool
Posted: Sat Oct 26, 2019 7:19 pm
Nice nautical thing you got going there !
Re: Mike Kosser's new tool
Posted: Fri Nov 01, 2019 4:10 pm
Now available to order. Sent in my order today.