These are just some more photos of the tool that I was fortunate enough to find as mentioned in my previous thread ( viewtopic.php?f=2&t=9482 ). As I had mentioned in the previous thread, I have only seen these in original trade publications, the image below coming from the April 1919 volume of the Automobile Trade Journal, published by the Chilton Company.
This is a serious piece of tooling for just removing a dust cap.
Cantrell-Miller Dust Cap Puller
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 523
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Cantrell-Miller Dust Cap Puller
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
-
Topic author - Posts: 523
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Re: Cantrell-Miller Dust Cap Puller
Some more photos.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
-
Topic author - Posts: 523
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Re: Cantrell-Miller Dust Cap Puller
The bar with the 3 nibs on it is what actually grabs the dust cap and does the pulling. The 2 nibs at the left end (in the photos) fit through the main body of the casting and is held in place with a set screw. Once the end grabs the lip of the dust cap you tighten the set screw and the T-handle screw and then crank away.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.