Need Dummy axle for cantrell miller sleeve puller
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 161
- Joined: Sun Jan 06, 2019 1:53 pm
- First Name: Warren
- Last Name: Webb
- Location: Owasso OK
Need Dummy axle for cantrell miller sleeve puller
I need a dummy axle for the Cantrell Miller sleeve puller so I can remove sleeves out of a single housing. Someone told me that someone on here reproduced these.
-
- Posts: 519
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Re: Need Dummy axle for cantrell miller sleeve puller
I believe that it was Scott Conger that had made some. If you have an old won-out axle and a couple of 2" OD washers, you can make one:
I had welded the washers together and than welded them to the cut off portion of the old worn out axle.
I had welded the washers together and than welded them to the cut off portion of the old worn out axle.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.