aluminum intake manifold and carburator

Post parts wanted or for sale here

Topic author
Gene_French
Posts: 303
Joined: Tue Jan 08, 2019 9:58 am
First Name: Gene
Last Name: French
Location: Nunn, CO
Board Member Since: 2014

aluminum intake manifold and carburator

Post by Gene_French » Mon Jul 13, 2020 7:46 pm

for sale: aluminum intake and aftermarket carburator ( model A carb. )... this is an aftermarket ( performance?) manifold of unknown manufacturer ... carb. will benefit from a rebuild ... manifold has a 1/8" pipe thread at elbow ... a simple pipe plug to close or use with vac. wipers or vac.tank for fuel supply ... price is $75 plus $15.05 flat rate postage in lower 48 states ... actual postage outside this area or INTERNATIONAL ... always an optimist Gene French 970-581-2808
manifoldt.jpg
manifoldt1.jpg


Joe Bell
Posts: 417
Joined: Thu Feb 21, 2019 1:20 pm
First Name: Joe
Last Name: Bell
Location: Tiffin Ohio
MTFCI Number: 24066

Re: aluminum intake manifold and carburator

Post by Joe Bell » Tue Jul 14, 2020 6:59 am

The intake is a UJ some like them.


csnailnrun
Posts: 124
Joined: Sat Jan 19, 2019 9:05 am
First Name: Ryan
Last Name: Snellen
Location: Nashville
Board Member Since: 2017

Re: aluminum intake manifold and carburator

Post by csnailnrun » Tue Jul 14, 2020 7:27 am

I’ll take the intake Gene. Sent you a text. Thanks!


Topic author
Gene_French
Posts: 303
Joined: Tue Jan 08, 2019 9:58 am
First Name: Gene
Last Name: French
Location: Nunn, CO
Board Member Since: 2014

Re: aluminum intake manifold and carburator

Post by Gene_French » Tue Jul 14, 2020 8:13 am

the intake/carb. is spoken for ...thank you Ryan S. and MTFCA


StanHowe
Posts: 649
Joined: Mon Jan 07, 2019 5:42 pm
First Name: Stan
Last Name: Howe
Location: Helena, MT
MTFCA Number: 19133
Board Member Since: 1999

Re: aluminum intake manifold and carburator

Post by StanHowe » Tue Jul 14, 2020 11:34 am

There should be a rule that you can't post anything really cool for sale before I get up, have breakfast and am checking the classifieds!!!


DustySpokes
Posts: 10
Joined: Wed Jan 30, 2019 2:20 pm
First Name: Edmund
Last Name: Niedzielski
Location: Saskatchewan

Re: aluminum intake manifold and carburator

Post by DustySpokes » Wed Jul 15, 2020 6:22 pm

Stan, that U & J Manifold was speaking to you huh ? !


Craig Leach
Posts: 62
Joined: Tue Jan 08, 2019 12:22 am
First Name: craig
Last Name: leach
Location: Laveen Az
MTFCA Number: 26647

Re: aluminum intake manifold and carburator

Post by Craig Leach » Wed Jul 15, 2020 8:33 pm

That is the same setup I have on my speedster works super. takes alittle work to set up the throttle and mixture adjuster but works great!

User avatar

Henry K. Lee
Posts: 3058
Joined: Sun Jan 06, 2019 11:09 am
First Name: Henry
Last Name: Lee
Location: South Pittsburg, TN
MTFCA Number: 479
MTFCA Life Member: YES

Re: aluminum intake manifold and carburator

Post by Henry K. Lee » Wed Jul 15, 2020 8:54 pm

Stan,

the prescription for beauty rest is not working for me either according to the wife. But she is over due an eye exam anyway!

Hank

Post Reply Previous topicNext topic