Want a mag drive complete, don't need the mag. Let me know what you have, scammers need not waist the time, I will be asking for very detailed photos .
frontyboy
2h06-919-1949.(Seattle)
WTB: Mag drive for model t.
-
Kevin Pharis
- Posts: 1584
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
-
frontyboy
Topic author - Posts: 382
- Joined: Tue Jul 23, 2019 3:16 pm
- First Name: dick
- Last Name: dock
- * REQUIRED* Type and Year of Model Ts owned: T sprint cars
- Location: locchoy wa
Re: WTB: Mag drive for model t.
cross drive non generator
thnx
frontyboy(my other speedster is a 1915 t roadster with a dual overhead cam GALLIVAN engine powered.
thnx
frontyboy(my other speedster is a 1915 t roadster with a dual overhead cam GALLIVAN engine powered.
-
GregC
- Posts: 7
- Joined: Sat Aug 16, 2025 11:05 am
- First Name: Greg
- Last Name: Cunningham
- * REQUIRED* Type and Year of Model Ts owned: A single SCAT crankshaft
- Location: Chattanooga TN
Re: WTB: Mag drive for model t.
I wanna see that gallivan!!
-
Kevin Pharis
- Posts: 1584
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: WTB: Mag drive for model t.
Sounds like yur lookin for a Matco or Columbo. None here, but I do have a couple extra 3in1 plates if you wanna run a dizzy
-
Dan McEachern
- Posts: 1420
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
Re: WTB: Mag drive for model t.
Mark- I have the drive nuts for Matco crossdrives if you need one in the future.
Dan
Dan
-
Kevin Pharis
- Posts: 1584
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: WTB: Mag drive for model t.
I have drawings somewhere for the drive shaft and bushing for the MATCO, not sure if they interchange with the Eisemann tho. The 1” rubber hose coupler typical of the MATCO works very well