MTFCA Forum

I have the following Z tools available for purchase. Quantities available are as depicted in each photo. As well as the price. Shipping for a single item is $8.30 USPO Small Flat Rate Priority envelope. If you purchase two or more, the shipping will be $15.05 USPO Medium Flat Rate Priority. Purchase several items at a time and save on shipping. First come first serve. Get them while supplies last. Payment by PayPal (Preferred) or check. PM me or call Mark Chaffin (951) 805-0928
Connecting rod clamp bolt wrench 3-Z-647 / 5-Z-209 $25.00 each
Flywheel cap screw wrench 3-Z-1179 / 5-Z-210 $30.00 each
1/2" L socket wrench 5-Z-155 $25.00 each
Main bearing bolt wrench 5-Z-156 $25.00 each
Main bearing bolt nut wrench 5-Z-156 $25.00 each

Front axle spindle bearing cone wrench 3-Z-699 $35.00 each
Universal joint to transmission tail shaft wrench 5-Z-196 $35.00 each

3/8" open end wrench 5-Z-195 $20.00
Body bracket connecting holding wrench 5-Z-212 $25.00 each
Carburetor to manifold and generator mounting wrench 5-Z-817 $30.00
Connecting rod cap nut wrench (for removing #4 piston on a 3-dip pan) 5-Z-157 $35.00 each
Crankshaft bearing cap nut wrench 5-Z-153 $25.00

Crankshaft bearing cap nut wrench 5-Z-153 $25.00
Crankshaft center bearing bolt nut wrench 5-Z-815 $30.00
Driveshaft spool stud nut wrench 5-Z-158 $35.00
Exhaust pack nut wrench 3-Z-524 $35.00
Front and rear spring perch nut speed wrench 3-Z-751 $35.00

Generator third brush wrench 5-Z-249 and 5-Z-806 $20.00 each
Oil pan to engine and transmission bolt speed wrench 5-Z-1835 $35.00
Axle housing nut and bolt wrench 5-Z-152 $25.00 each
Rear axle sleeve puller (heavy duty / unknown manufacture) $40.00
Spindle bushing driver (Unknown manufacturer) $25.00

Valve spring removal wrench 5-Z-319 $25.00
26/27 wire wheel lug nut wrench T-2839 $30.00

Sleeve puller has been sold
One spindle cone wrench sold
Driveshaft stud nut wrench sold.

One universal joint wrench sold.

email sent

Front spindle bearing cone wrenches are SOLD OUT
One body bracket holding wrench sold.
Another U Joint wrench sold.

Thanks Scott!

Mark I sent you a PM

26/27 Lug wrench sold.
Spring perch speed wrench sold.
Another Universal joint wrench sold.

Many remaining. Message or call with your needs.

Thanks

Mark

E-mail sent

Another universal joint wrench sold to Darryl. Only four remaining.

Valve spring removal tool has been sold.

I will take body bracket connecting holding wrench 5-Z-212 send me an email

Pack nut wrench sold to Don. Thanks Don! Thanks MTFCA!

Body bracket holding wrench pending to Steve. Thanks Steve!

Pan speed wrench sold.
Main bearing nut wrench sold.
Main bearing bolt wrench sold.
Carburetor and generator mounting wrench sold.
Another universal joint wrench sold.
Thanks Scott!

Still have a few remaining. Get them while they last. Contact me with your needs by PM or phone. Mark Chaffin (951) 805-0928

One universal joint wrench sold to Scott. Thanks Scott!

I have only one universal joint wrench remaining and then they will be sold out.

I'll take the universal joint wrench

The Universal Joint to Tail Shaft wrenches are now sold out!

I still have the following:

(1) Flywheel to crankshaft bolt wrench $30.00
(5) Connecting rod bolt wrench $25.00
(1) Crankshaft center bearing bolt T wrench $30.00
(1) Driveshaft spool stud nut wrench $35.00
(3) Rear axle bolt and nut wrench $25.00
(1) 3/8 Open end wrench $20.00
(2) Generator 3rd brush adjustment wrench $20.00
(3) 3/8 "L" wrench / transmission cam hut wrench $25.00)

All remaining tools listed above are now $20.00 each.

Hi Mark

I would like to buy one of the universal joint wrenches please.

Emai sent

I still have the following:

(1) Flywheel to crankshaft bolt wrench $30.00
(5) Connecting rod bolt wrench $25.00
(1) Crankshaft center bearing bolt T wrench $30.00
(1) Driveshaft spool stud nut wrench $35.00
(3) Rear axle bolt and nut wrench $25.00
(1) 3/8 Open end wrench $20.00
(2) Generator 3rd brush adjustment wrench $20.00
(3) 3/8 "L" wrench / transmission cam hut wrench $25.00)

REDUCED PRICE!!!!!!!!!!!!

I still have the following:

(1) Flywheel to crankshaft bolt wrench $20.00
(5) Connecting rod bolt wrench $15.00
(1) Crankshaft center bearing bolt T wrench $20.00
(1) Driveshaft spool stud nut wrench $20.00
(3) Rear axle bolt and nut wrench $20.00
(1) 3/8 Open end wrench $15.00
(2) Generator 3rd brush adjustment wrench $15.00
(3) 3/8 "L" wrench / transmission cam hut wrench $15.00)

Purchase several and save on shipping.