WTB, original Universal Ball Cap Screws, T-3371
-
Topic author - Posts: 523
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
WTB, original Universal Ball Cap Screws, T-3371
Just as the subject line says, I am in need of at least 4 (preferably 6) good, original cap screws for the Universal Joint Ball Cap. These are the 2 lower bolts with the cross-drilled heads for the safety wire, T-3371, 3/8-24 x 13/16. I set these aside so I would not lose them, and as with most folks, I didn't lose them, I just can't find them. Please let me know what you might have available, you can contact me through a Private Message here on the Forum or through e-mail. A Private Message has more of a guarantee of being seen, e-mails from Forum members always seem to go into my spam folder. Thanks for looking and for any help, Joe.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
-
- Posts: 31
- Joined: Mon Jan 07, 2019 6:13 pm
- First Name: Robert
- Last Name: Robbins
- * REQUIRED* Type and Year of Model Ts owned: 1926 roadster pickup, 1926 tudor sedan
- Location: 504 W. 5th
- MTFCA Number: 30323
- Board Member Since: 2012
Re: WTB, original Universal Ball Cap Screws, T-3371
I did the same thing! Finally got the rearend together and installed but when I looked for the bolts, They are nowhere to be found! So I used some temps till I find them! That should teach me to not cleanup all the nuts, Washers, bolts, and cotter pins.STEVE
-
Topic author - Posts: 523
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Re: WTB, original Universal Ball Cap Screws, T-3371
Thought it was better than 10 characters. Still looking.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
-
Topic author - Posts: 523
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Re: WTB, original Universal Ball Cap Screws, T-3371
Success! Replacements are on the way and I am sure that someday in the future I may find the ones I set aside so I would not lose them.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.