Page 1 of 1
WTB: EARLY WISHBONE
Posted: Wed Feb 12, 2020 2:23 pm
by Shane Lach
I'd like to purchase a junk early wishbone I can cut up for my speedster project. I really only need the threaded ends with a few inches off the back so I can build up the top portion of my split wishbone. I'd make some if I had access to a lathe but alas I do not. If you have one with a junk ball or bends not worth repairing, I would purchase it. Thanks!
Re: WTB: EARLY WISHBONE
Posted: Wed Feb 12, 2020 4:52 pm
by TRDxB2
Shane, I have one (actually 2). Was thinking of making radius bars. I have some Model A tie rods that are straight and may be the same thread size (I'm going to check). I got these for the same reason. If you got a design in mind - Id be interested. Frank
Re: WTB: EARLY WISHBONE
Posted: Thu Feb 13, 2020 3:05 pm
by aDave
Shane, If frank doesn't have what you want, some snowless day take a ride down to Lang's...surely there will be some metal there that fits your needs. It's a plesant drive...if no snow.
cheers,
Re: WTB: EARLY WISHBONE
Posted: Thu Feb 13, 2020 5:14 pm
by It's Bill
I have one for Chaffins. If you want it, email or pm me. $175.00. That is my cost. You pay shipping. Cheers, Bill
Re: WTB: EARLY WISHBONE
Posted: Thu Feb 13, 2020 5:15 pm
by It's Bill
That's FROM Chaffins.
Re: WTB: EARLY WISHBONE
Posted: Thu Feb 13, 2020 6:44 pm
by TRDxB2
Sent Shane what he wanted Today