Holley NH swivel top carburetor
-
Topic author - Posts: 592
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- * REQUIRED* Type and Year of Model Ts owned: 1914 runabout, 1921 homemade truck, 1921 Speedster
- Location: Brownsboro, TX
- MTFCA Number: 51502
- Board Member Since: 2007
Holley NH swivel top carburetor
New viton tipped needle and seat, spray nozzle, choke spring and ID plate, reconditioned spray needle, passages cleaned and sealed with set screws, tested float. This one has the larger float for the cowl mounted gasoline tank. Test run. $160 postpaid to continental USA. Email: wlkma9@gmail.com
Corey Walker, Brownsboro, Texas
-
- Posts: 1101
- Joined: Sat Jan 12, 2019 9:24 pm
- First Name: Robert
- Last Name: Govoni
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring
- Location: Fredericksburg, VA
- MTFCA Number: 32331
- Board Member Since: 2016
Re: Holley NH swivel top carburetor
What happens if you run one with the smaller float and a 26/7 gas tank?
-
Topic author - Posts: 592
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- * REQUIRED* Type and Year of Model Ts owned: 1914 runabout, 1921 homemade truck, 1921 Speedster
- Location: Brownsboro, TX
- MTFCA Number: 51502
- Board Member Since: 2007
Re: Holley NH swivel top carburetor
It works but they started using a slightly larger float because of increased fuel pressure from the cowl mounted tank. I’ve never had a cowl mounted tank, so I say they work, but I figure since they only make the smaller floats and I’ve never heard much discussion about them not working.
Corey Walker, Brownsboro, Texas
-
- Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: Holley NH swivel top carburetor
Robert
the viton is a more certain seal than the original metal on metal seal (which was very good when new). Smaller float shouldn't be a problem, but it is always a good idea to make use of the sediment bowl shut-off for stops of any length and for sure, storage of the vehicle. Gravity feed systems are 100% fallible. It's just a matter of when and not "if".
the viton is a more certain seal than the original metal on metal seal (which was very good when new). Smaller float shouldn't be a problem, but it is always a good idea to make use of the sediment bowl shut-off for stops of any length and for sure, storage of the vehicle. Gravity feed systems are 100% fallible. It's just a matter of when and not "if".
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 1101
- Joined: Sat Jan 12, 2019 9:24 pm
- First Name: Robert
- Last Name: Govoni
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring
- Location: Fredericksburg, VA
- MTFCA Number: 32331
- Board Member Since: 2016
Re: Holley NH swivel top carburetor
Thanks for the info. I rebuilt my sediment bowl as well as got another shut off valve for near the carb.
-
Topic author - Posts: 592
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- * REQUIRED* Type and Year of Model Ts owned: 1914 runabout, 1921 homemade truck, 1921 Speedster
- Location: Brownsboro, TX
- MTFCA Number: 51502
- Board Member Since: 2007
-
- Posts: 2789
- Joined: Sun Jan 06, 2019 12:26 pm
- First Name: Dallas
- Last Name: Landers
- * REQUIRED* Type and Year of Model Ts owned: 26 Rpu, 23 TT, 24 coupe,
- Location: N.E. Indiana
- MTFCA Number: 49995
Re: Holley NH swivel top carburetor
Im running two of Corey's NH carbs on my T's. Very satisfied customer here.
-
- Posts: 987
- Joined: Tue Jan 22, 2019 8:16 am
- First Name: Richard
- Last Name: Gould
- * REQUIRED* Type and Year of Model Ts owned: 1910 touring, 1912 roadster , 1927 roadster
- Location: Folsom, CA
Re: Holley NH swivel top carburetor
I'll buy your carb. Private email sent
-
- Posts: 1
- Joined: Mon Apr 13, 2020 5:32 am
- First Name: Mark
- Last Name: Gaynor
- Location: Denver, Colorado
Re: Holley NH swivel top carburetor
Please check your email.Corey Walker wrote: ↑Tue Apr 07, 2020 1:00 pmNew viton tipped needle and seat, spray nozzle, choke spring and ID plate, reconditioned happy wheels spray needle, passages cleaned and sealed with set screws, tested float. This one has the larger float for the cowl mounted gasoline tank. Test run. $160 postpaid to continental USA. Email: wlkma9@gmail.com
-
- Posts: 1063
- Joined: Tue Jan 08, 2019 10:53 am
- First Name: Terry
- Last Name: Woods
- * REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
- Location: Cibolo (San Antonio), TX
- MTFCI Number: 20180
Re: Holley NH swivel top carburetor
SOLD ? ? ?
-
- Posts: 1063
- Joined: Tue Jan 08, 2019 10:53 am
- First Name: Terry
- Last Name: Woods
- * REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
- Location: Cibolo (San Antonio), TX
- MTFCI Number: 20180
Re: Holley NH swivel top carburetor
Corey, is it sold? / / /
-
- Posts: 987
- Joined: Tue Jan 22, 2019 8:16 am
- First Name: Richard
- Last Name: Gould
- * REQUIRED* Type and Year of Model Ts owned: 1910 touring, 1912 roadster , 1927 roadster
- Location: Folsom, CA
Re: Holley NH swivel top carburetor
Yes, I purchased it.