WTB: 4 into 1 exhaust header

Post parts wanted or for sale here

Topic author
Tmodelt
Posts: 143
Joined: Mon Jan 07, 2019 3:48 pm
First Name: Kim
Last Name: Wynn
Location: Morris, IL

WTB: 4 into 1 exhaust header

Post by Tmodelt » Wed Apr 22, 2020 10:32 am

I am looking for a 4 into 1 exhaust header for my 26/27 racer project.

I would prefer one where I could attach a collector pipe and run underneath the car to exit the back.

Plans and/or drawings would be acceptable also as I have a local muffler shop that does custom work

Any help would be greatly appreciated.

Kim R. Wynn

User avatar

TRDxB2
Posts: 918
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

Re: WTB: 4 into 1 exhaust header

Post by TRDxB2 » Wed Apr 22, 2020 11:42 am

Found this last year on the forum will see if I can find the link again (was from a member) can give you some ideas anyway
Secrets of Speed book says 32in  primaries.jpeg
Secrets of Speed book says 32in primaries.jpeg (28.02 KiB) Viewed 648 times
Secrets of Speed 3.jpeg
Secrets of Speed 3.jpeg (18.87 KiB) Viewed 648 times
Attachments
Secrets of Speed 2.jpeg
Secrets of Speed 2.jpeg (38.32 KiB) Viewed 648 times

User avatar

TRDxB2
Posts: 918
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

Re: WTB: 4 into 1 exhaust header

Post by TRDxB2 » Wed Apr 22, 2020 12:13 pm

Found this link http://www.mtfca.com/discus/messages/11 ... 1283463447 with these pictures
Ken Kopsky 30 Aug 2010.jpg
Dan Trace 31 Aug 2010.jpg
Other designs from where ?
177683.jpg
Attachments
Mac's discountinued model A.jpg
Mac's discountinued model A.jpg (30.69 KiB) Viewed 637 times


ModelTWoods
Posts: 184
Joined: Tue Jan 08, 2019 10:53 am
First Name: Terry
Last Name: Woods
Location: Cibolo (San Antonio), TX
MTFCI Number: 20180

Re: WTB: 4 into 1 exhaust header

Post by ModelTWoods » Wed Apr 22, 2020 12:38 pm

Red's Headers made and offered a header for Model T's at one time, but the demand was low and they quit making and stocking them. I contacted them and they said if demand and orders were great enough, they could do it again.

User avatar

TRDxB2
Posts: 918
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

Re: WTB: 4 into 1 exhaust header

Post by TRDxB2 » Thu Apr 23, 2020 1:33 am

ModelTWoods wrote:
Wed Apr 22, 2020 12:38 pm
Red's Headers made and offered a header for Model T's at one time, but the demand was low and they quit making and stocking them. I contacted them and they said if demand and orders were great enough, they could do it again.
Red's is still listing a Model A header on their website. http://reds-headers.net/index.php?main_ ... cts_id=145
Since there is an adapter plate for using Model A intake & exhaust manifolds on a T, is there a way for Red's header to work or be modified to?


dmdeaton
Posts: 239
Joined: Mon Oct 21, 2019 9:43 pm
First Name: Danny
Last Name: Deaton
Location: Ohio

Re: WTB: 4 into 1 exhaust header

Post by dmdeaton » Thu Apr 23, 2020 12:59 pm

I would be up for one if Red's started making again, I will call them. They just changed owners. I need one for my speedster/racer

I have the plate from Dan M. on here to weld a set up, but far from getting to trying it.


ModelTWoods
Posts: 184
Joined: Tue Jan 08, 2019 10:53 am
First Name: Terry
Last Name: Woods
Location: Cibolo (San Antonio), TX
MTFCI Number: 20180

Re: WTB: 4 into 1 exhaust header

Post by ModelTWoods » Thu Apr 23, 2020 1:18 pm

TRDxB2 wrote:
Thu Apr 23, 2020 1:33 am
ModelTWoods wrote:
Wed Apr 22, 2020 12:38 pm
Red's Headers made and offered a header for Model T's at one time, but the demand was low and they quit making and stocking them. I contacted them and they said if demand and orders were great enough, they could do it again.
Red's is still listing a Model A header on their website. http://reds-headers.net/index.php?main_ ... cts_id=145
Since there is an adapter plate for using Model A intake & exhaust manifolds on a T, is there a way for Red's header to work or be modified to?
Any header make for a Model A should work, especially id the adapter plate that is sold by vendors to adapt a Model A intake and exhaust is used between the block and header flange. Snyder's listes a Model A header in their catalog, too. I don't know if its the one Red's makes.


dmdeaton
Posts: 239
Joined: Mon Oct 21, 2019 9:43 pm
First Name: Danny
Last Name: Deaton
Location: Ohio

Re: WTB: 4 into 1 exhaust header

Post by dmdeaton » Thu Apr 23, 2020 1:54 pm

I have the Red's model A header hanging in my shop. I will mock it up on my speedster frame and take a couple pics. Would you guys rather start a new thread out of the classifieds? I don't like the idea of a adaptor. There are enough gaskets and such in that area without one.

User avatar

TRDxB2
Posts: 918
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

Re: WTB: 4 into 1 exhaust header

Post by TRDxB2 » Thu Apr 23, 2020 3:04 pm

I started a New Thread in the General Discussion Forum under "Headers for a Model T" to continue- My interest isn't just 4in1 but Lakeside or a vintage look.


Unprr
Posts: 77
Joined: Mon Jan 07, 2019 9:20 pm
First Name: George
Last Name: Schmidt
Location: Elkhorn
MTFCA Number: 49710

Re: WTB: 4 into 1 exhaust header

Post by Unprr » Thu Apr 23, 2020 3:44 pm

Kim, I have a header that came off a Model T speedster project that I sold.
I’m having trouble posting a photo. Send me your e mail and I will forward photos.

George Schmidt
Unprr@cox.net


Unprr
Posts: 77
Joined: Mon Jan 07, 2019 9:20 pm
First Name: George
Last Name: Schmidt
Location: Elkhorn
MTFCA Number: 49710

Re: WTB: 4 into 1 exhaust header

Post by Unprr » Thu Apr 23, 2020 6:12 pm

Kim, found how to post photos. See attached header.
Hope you are another party can use it.

George
Unprr@cox.net
Attachments
43D23720-1692-4E35-B5D2-87CCF0568378.jpeg
618934A5-76F5-4B5D-9DA8-E9D0FB9A1C4B.jpeg


Joe Bell
Posts: 373
Joined: Thu Feb 21, 2019 1:20 pm
First Name: Joe
Last Name: Bell
Location: Tiffin Ohio
MTFCI Number: 24066

Re: WTB: 4 into 1 exhaust header

Post by Joe Bell » Thu Apr 23, 2020 7:11 pm

I got rid of one that was new to John Bell up in Canada, he was trying to peddle it, it was brand new and did not fit my speedster with the rajo, It had come with it in a box when I purchased it.


Alex Dragone
Posts: 105
Joined: Tue Mar 12, 2019 8:43 pm
First Name: Alex
Last Name: Dragone
Location: Orange, CT

Re: WTB: 4 into 1 exhaust header

Post by Alex Dragone » Thu Apr 23, 2020 8:48 pm

Kim I have a nice one that I had made and never used. I can send some pictures tomorrow if you are still looking. Just send me an email. - Alex

Post Reply Previous topicNext topic