WTB: 4 into 1 exhaust header
-
Topic author - Posts: 167
- Joined: Mon Jan 07, 2019 3:48 pm
- First Name: Kim
- Last Name: Wynn
- * REQUIRED* Type and Year of Model Ts owned: 1923 Roadster & 1927 Speedster
- Location: Morris, IL
WTB: 4 into 1 exhaust header
I am looking for a 4 into 1 exhaust header for my 26/27 racer project.
I would prefer one where I could attach a collector pipe and run underneath the car to exit the back.
Plans and/or drawings would be acceptable also as I have a local muffler shop that does custom work
Any help would be greatly appreciated.
Kim R. Wynn
I would prefer one where I could attach a collector pipe and run underneath the car to exit the back.
Plans and/or drawings would be acceptable also as I have a local muffler shop that does custom work
Any help would be greatly appreciated.
Kim R. Wynn
-
- Posts: 5459
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
- Location: Moline IL
- Board Member Since: 2018
Re: WTB: 4 into 1 exhaust header
Found this last year on the forum will see if I can find the link again (was from a member) can give you some ideas anyway
- Attachments
-
- Secrets of Speed 2.jpeg (38.32 KiB) Viewed 4028 times
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
- Posts: 5459
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
- Location: Moline IL
- Board Member Since: 2018
Re: WTB: 4 into 1 exhaust header
Found this link http://www.mtfca.com/discus/messages/11 ... 1283463447 with these pictures
Other designs from where ?
- Attachments
-
- Mac's discountinued model A.jpg (30.69 KiB) Viewed 4017 times
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
- Posts: 1063
- Joined: Tue Jan 08, 2019 10:53 am
- First Name: Terry
- Last Name: Woods
- * REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
- Location: Cibolo (San Antonio), TX
- MTFCI Number: 20180
Re: WTB: 4 into 1 exhaust header
Red's Headers made and offered a header for Model T's at one time, but the demand was low and they quit making and stocking them. I contacted them and they said if demand and orders were great enough, they could do it again.
-
- Posts: 5459
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
- Location: Moline IL
- Board Member Since: 2018
Re: WTB: 4 into 1 exhaust header
Red's is still listing a Model A header on their website. http://reds-headers.net/index.php?main_ ... cts_id=145ModelTWoods wrote: ↑Wed Apr 22, 2020 12:38 pmRed's Headers made and offered a header for Model T's at one time, but the demand was low and they quit making and stocking them. I contacted them and they said if demand and orders were great enough, they could do it again.
Since there is an adapter plate for using Model A intake & exhaust manifolds on a T, is there a way for Red's header to work or be modified to?
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
- Posts: 730
- Joined: Mon Oct 21, 2019 9:43 pm
- First Name: Danny
- Last Name: Deaton
- Location: Ohio
Re: WTB: 4 into 1 exhaust header
I would be up for one if Red's started making again, I will call them. They just changed owners. I need one for my speedster/racer
I have the plate from Dan M. on here to weld a set up, but far from getting to trying it.
I have the plate from Dan M. on here to weld a set up, but far from getting to trying it.
-
- Posts: 1063
- Joined: Tue Jan 08, 2019 10:53 am
- First Name: Terry
- Last Name: Woods
- * REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
- Location: Cibolo (San Antonio), TX
- MTFCI Number: 20180
Re: WTB: 4 into 1 exhaust header
Any header make for a Model A should work, especially id the adapter plate that is sold by vendors to adapt a Model A intake and exhaust is used between the block and header flange. Snyder's listes a Model A header in their catalog, too. I don't know if its the one Red's makes.TRDxB2 wrote: ↑Thu Apr 23, 2020 1:33 amRed's is still listing a Model A header on their website. http://reds-headers.net/index.php?main_ ... cts_id=145ModelTWoods wrote: ↑Wed Apr 22, 2020 12:38 pmRed's Headers made and offered a header for Model T's at one time, but the demand was low and they quit making and stocking them. I contacted them and they said if demand and orders were great enough, they could do it again.
Since there is an adapter plate for using Model A intake & exhaust manifolds on a T, is there a way for Red's header to work or be modified to?
-
- Posts: 730
- Joined: Mon Oct 21, 2019 9:43 pm
- First Name: Danny
- Last Name: Deaton
- Location: Ohio
Re: WTB: 4 into 1 exhaust header
I have the Red's model A header hanging in my shop. I will mock it up on my speedster frame and take a couple pics. Would you guys rather start a new thread out of the classifieds? I don't like the idea of a adaptor. There are enough gaskets and such in that area without one.
-
- Posts: 5459
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
- Location: Moline IL
- Board Member Since: 2018
Re: WTB: 4 into 1 exhaust header
I started a New Thread in the General Discussion Forum under "Headers for a Model T" to continue- My interest isn't just 4in1 but Lakeside or a vintage look.
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
- Posts: 258
- Joined: Mon Jan 07, 2019 9:20 pm
- First Name: George
- Last Name: Schmidt
- * REQUIRED* Type and Year of Model Ts owned: 1927 coupe, 1924 Model T pickup
- Location: Elkhorn
- MTFCA Number: 49710
Re: WTB: 4 into 1 exhaust header
Kim, I have a header that came off a Model T speedster project that I sold.
I’m having trouble posting a photo. Send me your e mail and I will forward photos.
George Schmidt
Unprr@cox.net
I’m having trouble posting a photo. Send me your e mail and I will forward photos.
George Schmidt
Unprr@cox.net
-
- Posts: 258
- Joined: Mon Jan 07, 2019 9:20 pm
- First Name: George
- Last Name: Schmidt
- * REQUIRED* Type and Year of Model Ts owned: 1927 coupe, 1924 Model T pickup
- Location: Elkhorn
- MTFCA Number: 49710
Re: WTB: 4 into 1 exhaust header
Kim, found how to post photos. See attached header.
Hope you are another party can use it.
George
Unprr@cox.net
Hope you are another party can use it.
George
Unprr@cox.net
-
- Posts: 1056
- Joined: Thu Feb 21, 2019 1:20 pm
- First Name: Joe
- Last Name: Bell
- * REQUIRED* Type and Year of Model Ts owned: 24 Fordor
- Location: Tiffin Ohio
- MTFCI Number: 24066
Re: WTB: 4 into 1 exhaust header
I got rid of one that was new to John Bell up in Canada, he was trying to peddle it, it was brand new and did not fit my speedster with the rajo, It had come with it in a box when I purchased it.
-
- Posts: 147
- Joined: Tue Mar 12, 2019 8:43 pm
- First Name: Alex
- Last Name: Dragone
- * REQUIRED* Type and Year of Model Ts owned: 1910 Roadster, 1911 Torpedo, 1915 Touring, 1926 Roadster
- Location: Orange, CT
Re: WTB: 4 into 1 exhaust header
Kim I have a nice one that I had made and never used. I can send some pictures tomorrow if you are still looking. Just send me an email. - Alex