Page 1 of 1

WTB: Cast Iron Rocky Mountain Drums

Posted: Sat May 16, 2020 9:15 am
by mdsBob
Like the subject line says, Cast Iron Drums to use with Rocky Mountain Brakes.
My understanding is that a run of these had been made at some point in the past with the small parking brake drum integrally cast making the 12" outer drum and in smaller inner drum 1 piece.
A pair was recently sold here but I missed out on them.
If someone has a pair I would be interested.
Thanks,
Bob

Re: WTB: Cast Iron Rocky Mountain Drums

Posted: Sat May 16, 2020 2:12 pm
by Scott_Conger
This is what Bob's asking for:
Rocky Repro Drum Outside.gif
Rocky Repro Drum Inside.gif

Re: WTB: Cast Iron Rocky Mountain Drums

Posted: Sat May 16, 2020 3:49 pm
by Joe Bell
Those look really familiar?? Thanks

Re: WTB: Cast Iron Rocky Mountain Drums

Posted: Sat May 16, 2020 5:24 pm
by Scott_Conger
Yes, Joe, they should!

I'm tickled to have them and will building a pair of rear wheels soon to put them on. Many thanks!

Re: WTB: Cast Iron Rocky Mountain Drums

Posted: Tue May 19, 2020 8:27 am
by mdsBob
Still Looking

Re: WTB: Cast Iron Rocky Mountain Drums

Posted: Tue May 19, 2020 11:06 am
by Original Smith
Maybe some of you don't know this? Real Rocky Mountain brake drums are one size. The current reproduction is a different size. The cast iron drums I have seen are the original size, and to my knowledge are not currently available.

Re: WTB: Cast Iron Rocky Mountain Drums

Posted: Thu Jun 11, 2020 5:40 am
by mdsBob
Just in case someone that might have them hasn't seen this.

Re: WTB: Cast Iron Rocky Mountain Drums

Posted: Thu Jun 11, 2020 3:39 pm
by Henry K. Lee
I have only a set of large drum cast iron ones, not small drums.

Re: WTB: Cast Iron Rocky Mountain Drums

Posted: Thu Jun 11, 2020 5:24 pm
by mdsBob
Hi Hank,
Sending you an e-mail.

Re: WTB: Cast Iron Rocky Mountain Drums

Posted: Sun Jun 14, 2020 7:51 am
by mdsBob
Henry K. Lee wrote:
Thu Jun 11, 2020 3:39 pm
I have only a set of large drum cast iron ones, not small drums.
Hank I sent you an e-mail, curious if it came through ok.
Bob

Re: WTB: Cast Iron Rocky Mountain Drums

Posted: Sun Jun 14, 2020 8:00 am
by Henry K. Lee
No I have not received. I am getting emails but sometimes 4 to 5 days later. ?

Hank

Re: WTB: Cast Iron Rocky Mountain Drums

Posted: Sun Jun 14, 2020 8:53 am
by mdsBob
Hank,
Just tried again. Double checked your e-mail address and pretty sure I got it right.
Let me know if it doesn't come through.
Thanks,
Bob