No Longer Available

Post parts wanted or for sale here

Topic author
Chad_Marcheese
Posts: 232
Joined: Tue Jan 15, 2019 6:06 am
First Name: Chad
Last Name: Marcheese
Location: Upstate, NY
MTFCA Number: 26904
Board Member Since: 2005

No Longer Available

Post by Chad_Marcheese » Fri Jul 17, 2020 9:34 pm

No Longer Available
Last edited by Chad_Marcheese on Thu Aug 13, 2020 8:47 pm, edited 2 times in total.


Topic author
Chad_Marcheese
Posts: 232
Joined: Tue Jan 15, 2019 6:06 am
First Name: Chad
Last Name: Marcheese
Location: Upstate, NY
MTFCA Number: 26904
Board Member Since: 2005

Re: Spindles with straight steering arms

Post by Chad_Marcheese » Fri Jul 17, 2020 9:34 pm

No Longer Available
Last edited by Chad_Marcheese on Thu Aug 13, 2020 8:47 pm, edited 1 time in total.


David Mazza
Posts: 195
Joined: Sun Jan 06, 2019 3:04 pm
First Name: David
Last Name: Mazza
Location: North Adams ma

Re: Spindles with straight steering arms

Post by David Mazza » Fri Jul 17, 2020 10:38 pm

The arms are the early style with the speedometer mount hole.


Ken Buhler
Posts: 145
Joined: Mon Jan 21, 2019 4:14 pm
First Name: Ken
Last Name: Buhler
Location: Kelowna B.C.
MTFCA Number: 49471
Board Member Since: 2012

Re: Spindles with straight steering arms

Post by Ken Buhler » Sat Jul 18, 2020 12:37 am

Chad, you do not want to be using the one with the notch. That is from a washer that got loose and cut a groove.


Allan
Posts: 2203
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
Location: Gawler, Australia

Re: Spindles with straight steering arms

Post by Allan » Sat Jul 18, 2020 3:49 am

Chad, the spindle with the wear grove is the later type with the flats on the shoulder so the bearing can be driven off, so it is no great loss.

Allan from down under.


Topic author
Chad_Marcheese
Posts: 232
Joined: Tue Jan 15, 2019 6:06 am
First Name: Chad
Last Name: Marcheese
Location: Upstate, NY
MTFCA Number: 26904
Board Member Since: 2005

Re: Spindles with straight steering arms

Post by Chad_Marcheese » Sat Jul 18, 2020 6:55 am

Thanks gentleman. I do realize the grooved spindle is not what I would use personally. As mentioned in my ad, the arms are the real value here.

If someone just wants the arms, I will remove them. Just trying to clear out some parts that are around here.

Post Reply Previous topicNext topic