What Pipe Size Are These Threads?

Post parts wanted or for sale here
User avatar

Topic author
Bill Everett
Posts: 84
Joined: Tue Jan 08, 2019 8:29 pm
First Name: Bill
Last Name: Everett
Location: Collierville, TN
MTFCA Number: 93
MTFCA Life Member: YES
Board Member Since: 2011

What Pipe Size Are These Threads?

Post by Bill Everett » Fri Aug 14, 2020 3:28 pm

I want to see if I have a tap for these threads.

Can anyone tell me the thread size for the studs that thread into here and hold the manifold clamps?

Any help is appreciated.

Thanks.
Attachments
Model T Manifold Clamp Stud Threads In Block.jpg

User avatar

RajoRacer
Posts: 1714
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: What Pipe Size Are These Threads?

Post by RajoRacer » Fri Aug 14, 2020 4:11 pm

Threads are 3/8 - 24.

User avatar

Mark Gregush
Posts: 2593
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
Location: Portland Or
Board Member Since: 1999

Re: What Pipe Size Are These Threads?

Post by Mark Gregush » Fri Aug 14, 2020 7:25 pm

Not pipe. if it's 1925 back these are a copy of the shorter 1926/27 style;
viewtopic.php?f=5&t=15000
I know the voices aren't real but damn they have some good ideas! :shock:

1921 Huckster
1925 Cut down pickup


Kerry
Posts: 511
Joined: Mon Jan 07, 2019 2:42 pm
First Name: Frank
Last Name: van Ekeren
Location: Rosedale Vic Australia

Re: What Pipe Size Are These Threads?

Post by Kerry » Fri Aug 14, 2020 7:27 pm

What's holding your welsh (freeze) plugs in?

User avatar

Mark Gregush
Posts: 2593
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
Location: Portland Or
Board Member Since: 1999

Re: What Pipe Size Are These Threads?

Post by Mark Gregush » Fri Aug 14, 2020 9:56 pm

Tension and mechanical force one hopes!
I know the voices aren't real but damn they have some good ideas! :shock:

1921 Huckster
1925 Cut down pickup


Kerry
Posts: 511
Joined: Mon Jan 07, 2019 2:42 pm
First Name: Frank
Last Name: van Ekeren
Location: Rosedale Vic Australia

Re: What Pipe Size Are These Threads?

Post by Kerry » Sat Aug 15, 2020 1:43 am

Right Mark, a smack in the middle with the ball of a engineering hammer would do just that.

Post Reply Previous topicNext topic