WANTED! APCO Steering Column Bracket.

Pep C Strebeck · Post by **Pep C Strebeck** » Mon Jan 25, 2021 2:52 pm

I am looking for an APCO (original or reproduction) steering column support bracket, WITH the groove for the horn wire tube (see photo below). I know that I can buy one from the vendors, but I thought I would ask here first to see if someone might have one they are not planning on using or that they may have one sitting on a shelf. Again, it does not matter if it is original or reproduction, but it must have the groove for the horn wire tube. Please let me know if you might have one available, you can contact me through e-mail or directly here on the Forum with a Private Message. Thank you for looking, it is appreciated.

Mark Osterman · Post by **Mark Osterman** » Mon Jan 25, 2021 5:35 pm

Is that my picture? I may have another.

Pep C Strebeck · Post by **Pep C Strebeck** » Mon Jan 25, 2021 5:45 pm

Mark Osterman wrote: ↑
Mon Jan 25, 2021 5:35 pm
Is that my picture? I may have another.

Yes it is. I usually credit all of my stolen internet photos, but I forgot on this one. I lifted it from the old Forum.

Pep C Strebeck · Post by **Pep C Strebeck** » Thu Jan 28, 2021 10:28 pm

A bracket has been located, thank you for looking.

MTFCA Forum

WANTED! APCO Steering Column Bracket.

WANTED! APCO Steering Column Bracket.

Re: WANTED! APCO Steering Column Bracket.

Re: WANTED! APCO Steering Column Bracket.

Re: WANTED! APCO Steering Column Bracket.