Post parts wanted or for sale here
-
Topic author
Scott_Conger
- Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Post
by Scott_Conger » Thu Mar 04, 2021 6:10 pm
What you'll get:
- Custom float valve installation tool (not available anywhere else)
- Full Flow Float Valve to un-strangle your NH and finally make it run correctly on hills (not available anywhere else)
- Lead seal to fully seal the valve/body interface - stop relying on the too-hard fiber seals which never seal properly (not available anywhere else)
PLUS:
2 Brand New USA made High Speed Steel taps:
- to clean out the adjustment needle threads plus the Full Flow Float Valve threads (1st tap)
- to clean out the Jet threads (2nd tap).
If you're going to do the job, do it right, and use the best parts and tools possible.
Everything listed for $83 plus $8 shipping: $91 total
Email only please, no PM's. I may not see replies. Thank You.
Why do Full Flow Float valves work so well? They have the CORRECT DIAMETER throughput (among other things!). What everyone else sells is on the left, what I sell is on the right. Why settle for incorrectly made ersatz, that will starve your car of fuel at the
worst possible time?
What you'll receive: 1 Ultimate NH carb upgrade Kit, PLUS 2 correct, USA made High Speed Steel taps (not carbon steel junk)
-
Attachments
-
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author
Scott_Conger
- Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Post
by Scott_Conger » Sun Mar 07, 2021 10:45 am
Back to the top
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
RLMills
- Posts: 1
- Joined: Sun Mar 07, 2021 4:45 pm
- First Name: Larry
- Last Name: Mills
- Location: New Castle PA
Post
by RLMills » Sun Mar 07, 2021 5:06 pm
Scott,
I want to purchase The Ultimate NH carb upgrade kit plus tapes.
Can I pay with a debit card?
What is my next step?
Thank you,
Larry Mills
477 East Maitland Ln
New Castle. PA 16105
Contact email at
eksflynn@gmail.com
Or text or call: 724-657-7461
-
Walt
- Posts: 1
- Joined: Mon Jan 07, 2019 12:12 pm
- First Name: Walter
- Last Name: Stone
- * REQUIRED* Type and Year of Model Ts owned: 1926 roadster pickup
- Location: 3801 Mount Airy Drive Mount Airy Md 21771
- MTFCI Number: 14045
Post
by Walt » Wed Mar 17, 2021 11:59 am
Scott,
I would like to buy one of your NH kits
Walter Stone
whstone@gmail.com
3801 Mount Airy Drive
Mount Airy, MD 21771
-
Topic author
Scott_Conger
- Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Post
by Scott_Conger » Thu Mar 18, 2021 1:35 pm
I am down to just a few valves left to make up these kits.
I will be making more, later spring or early summer, but if you plan to tour hills or open highways any time in the near future, and want one for Spring Touring. Act now or wait for the summer.
Thank you and Happy Touring.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
BE_ZERO_BE
- Posts: 541
- Joined: Sun Jan 06, 2019 12:27 pm
- First Name: BOB
- Last Name: CASCISA
- * REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
- Location: POULSBO, WA
- MTFCA Number: 16897
- MTFCI Number: 16628
Post
by BE_ZERO_BE » Thu Mar 18, 2021 4:46 pm
Scott,
I will take the ultimate kit.
email sent
Respectfully Submitted,
Be_Zero_Be
I drive a Model T ... Microseconds don't matter
For every Absolute Model T Fact there are at least three exceptions.
-
Dallas Landers
- Posts: 2786
- Joined: Sun Jan 06, 2019 12:26 pm
- First Name: Dallas
- Last Name: Landers
- * REQUIRED* Type and Year of Model Ts owned: 26 Rpu, 23 TT, 24 coupe,
- Location: N.E. Indiana
- MTFCA Number: 49995
Post
by Dallas Landers » Thu Mar 18, 2021 7:51 pm
Hey Scott, I'm almost to Chickasha but put my name down. I will contact you when I get home.
-
tmagill
- Posts: 43
- Joined: Tue Jan 08, 2019 5:48 am
- First Name: Tim
- Last Name: Magill
- Location: Bedford In
- MTFCA Number: 4444
Post
by tmagill » Fri Mar 19, 2021 5:56 am
Hey Scott, do you sell just the taps? I already have your float valve kits. Tim
-
Dallas Landers
- Posts: 2786
- Joined: Sun Jan 06, 2019 12:26 pm
- First Name: Dallas
- Last Name: Landers
- * REQUIRED* Type and Year of Model Ts owned: 26 Rpu, 23 TT, 24 coupe,
- Location: N.E. Indiana
- MTFCA Number: 49995
Post
by Dallas Landers » Sat Mar 27, 2021 5:02 pm
Bump and I sent you an email Scott.
Dallas
-
Mighty1924
- Posts: 55
- Joined: Wed Jan 16, 2019 10:15 pm
- First Name: Rick
- Last Name: Shaw
- * REQUIRED* Type and Year of Model Ts owned: 1922 Touring. 1924 Coupe
- Location: Sandwich IL
- MTFCA Number: 31541
- MTFCI Number: 24327
Post
by Mighty1924 » Sat Mar 27, 2021 5:40 pm
Scott
Sent you a email about getting a couple float valves and washers
Rick S.
-
Dan Hatch
- Posts: 4111
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Post
by Dan Hatch » Sat Mar 27, 2021 6:18 pm
If you are running a NH you need one of these.
Question Scott. Will these also work in a Vaporizer?
Thanks for making them. Dan
-
Topic author
Scott_Conger
- Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Post
by Scott_Conger » Sat Mar 27, 2021 8:30 pm
Dan
they will indeed work in a vaporizer
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Bob in ohio
- Posts: 15
- Joined: Mon Jan 07, 2019 9:04 pm
- First Name: Bob
- Last Name: Gairing
- * REQUIRED* Type and Year of Model Ts owned: 1910 touring
- Location: Ohio
Post
by Bob in ohio » Sat Mar 27, 2021 11:03 pm
Hello Scott - I would like to buy one of your upgrade kits plus an additional valve if possible. Please advise total cost.