Hi all,
I am looking to buy a brass spark and throttle quadrant for a 1911 steering column. I believe at this point it was produced by Dodge brothers. I am doing a rebuild of a reproduction steering column for my torpedo that failed on me and this is the last piece I need to do the assembly and get the car back and running.
Attaching a photo from Bill Hoffer showing one of the main differences in an original vs a repro. See the guards at the end that keep you from over extending the throttle and spark rods. Also the collar around the column appears to be more substantial.
Please let me know if you have one you would part with.
Thanks,
Austin Hovey
2O13O67112
ahovey@gmail.com
WTB Original Steering Column Quadrant for an ‘11
-
Topic author - Posts: 81
- Joined: Sun Mar 31, 2019 2:34 pm
- First Name: Austin
- Last Name: Hovey
- * REQUIRED* Type and Year of Model Ts owned: ‘11 Torpedo
- Location: New Jersey
- Board Member Since: 2014
WTB Original Steering Column Quadrant for an ‘11
- Attachments
-
- C48D1354-077D-467A-B57A-2D32ACDAE3BF.png (250.33 KiB) Viewed 1132 times
-
- Posts: 5256
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: WTB Original Steering Column Quadrant for an ‘11
Austin, if you can't find one locally, I have one.
Allan from down under.
Allan from down under.
-
Topic author - Posts: 81
- Joined: Sun Mar 31, 2019 2:34 pm
- First Name: Austin
- Last Name: Hovey
- * REQUIRED* Type and Year of Model Ts owned: ‘11 Torpedo
- Location: New Jersey
- Board Member Since: 2014
Re: WTB Original Steering Column Quadrant for an ‘11
Back to the top, one last try for something domestic.