WTB - Oilstone Powder
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
WTB - Oilstone Powder
I know there are clock and watchmakers or at least watch/clock hobbiests in the T hobby, so am asking you to go through your old bench and sell me your bottle of Oilstone Powder. My guess is that you have seldom if ever used it, can't remember where you got it, and are not sure where it is...
If this is YOU, then please contact me and let me know what you have. I will use it and not just store it.
thanks for looking
If this is YOU, then please contact me and let me know what you have. I will use it and not just store it.
thanks for looking
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 5339
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Number: 479
- MTFCA Life Member: YES
Re: WTB - Oilstone Powder
Sorry Sir,
We only have hens teeth and vintage Pixie dust that is will make you fly.
Hank
PS Sorry Scott, Had to have a little fun!
We only have hens teeth and vintage Pixie dust that is will make you fly.
Hank
PS Sorry Scott, Had to have a little fun!
Last edited by Henry K. Lee on Sun Nov 21, 2021 6:17 pm, edited 1 time in total.
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB - Oilstone Powder
You know, Hank, when I went looking for some the other day, I missed a NOS jar full on eBay by 5 minutes. MADDENING!
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 3384
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Morsher
- * REQUIRED* Type and Year of Model Ts owned: 1925TT, 1926 Martin-Parry bodied wagon, 1927 mercury bodied speedster
- Location: Norwalk Ohio
Re: WTB - Oilstone Powder
Scott, if rottenstone powder would work, I can send you a bunch. T
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB - Oilstone Powder
Thank you for reaching out. I have plenty of Rottenstone, too.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 279
- Joined: Mon Jan 07, 2019 6:41 pm
- First Name: Bill
- Last Name: Hoffer
- Location: Mars, PA
- MTFCA Number: 32571
- MTFCI Number: 24364
- Board Member Since: 2016
Re: WTB - Oilstone Powder
OK, in my quest for infinite knowledge, what is oil stone powder, and what do you do with it? Perplexed, Bill
-
- Posts: 1385
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John
- Last Name: Tannehill
- Location: Hot Coffee, MS
- MTFCA Number: 49460
Re: WTB - Oilstone Powder
Scott couldn’t you use sewing machine oil with shavings from the Whetstone? Cheap & plentiful if you have a whetstone that has been worn down so much that it’s unusable? Can’t tripoli be used also?
Last edited by JTT3 on Sun Nov 21, 2021 6:20 pm, edited 2 times in total.
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB - Oilstone Powder
Bill
it is what it is. Oilstone Powder - as opposed to a solid oilstone in your toolbox for your boy scout knife. It is mixed with high grade oil and used in conjunction with a mild steel lapping plate to relatively quickly bring objects to a flat surface with a blemish-free but dull finish.
It could be commonly found at any jewelers' supply house up into the 1990's. It was obsolete for 40 years even then... it was originally used to make things that most people didn't want, for a price they could not afford.
You may have guessed that I am the King of Useless Things
So, how goes the quest? any closer?
it is what it is. Oilstone Powder - as opposed to a solid oilstone in your toolbox for your boy scout knife. It is mixed with high grade oil and used in conjunction with a mild steel lapping plate to relatively quickly bring objects to a flat surface with a blemish-free but dull finish.
It could be commonly found at any jewelers' supply house up into the 1990's. It was obsolete for 40 years even then... it was originally used to make things that most people didn't want, for a price they could not afford.
You may have guessed that I am the King of Useless Things
So, how goes the quest? any closer?
Last edited by Scott_Conger on Sun Nov 21, 2021 8:44 pm, edited 1 time in total.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 5339
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Number: 479
- MTFCA Life Member: YES
Re: WTB - Oilstone Powder
Sent you a link Scott via email.
Hank
Hank
-
- Posts: 279
- Joined: Mon Jan 07, 2019 6:41 pm
- First Name: Bill
- Last Name: Hoffer
- Location: Mars, PA
- MTFCA Number: 32571
- MTFCI Number: 24364
- Board Member Since: 2016
Re: WTB - Oilstone Powder
Scott, in order to get from one place to another place, you first have to cover half the distance. Then you must cover half the remaining distance, then half the remaining distance, and so forth over and over. The net result is you never can quite get anywhere. That answer your question? Cheers, Bill
-
- Posts: 394
- Joined: Tue Jan 08, 2019 10:31 am
- First Name: Tom
- Last Name: Strickling
- * REQUIRED* Type and Year of Model Ts owned: 11 Torpedo, 18 Touring, 21 TT Huckster, 24 snowmpbile Staude and Shaw tractor conversions, Model T powered sickel bar mower
- Location: New Philadelphia Ohio
Re: WTB - Oilstone Powder
Will any of these products work?
https://www.sharpeningsupplies.com/Strops-C11.aspx
https://www.sharpeningsupplies.com/Strops-C11.aspx
“The trouble with retirement is that you never get a day off.” – Abe Lemons.
-
- Posts: 1113
- Joined: Mon Jan 07, 2019 8:01 am
- First Name: Mark
- Last Name: Nunn
- * REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
- Location: Bennington, NE
- MTFCA Number: 50321
- Board Member Since: 2017
Re: WTB - Oilstone Powder
I have a diamond plate that performs a similar function. It is a steel plate with diamond dust that is nickel plated onto the surface. I use it to keep my woodworking tools razer sharp. They can be seen at Woodworker Supply, woodworker.com.
-
- Posts: 5459
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
- Location: Moline IL
- Board Member Since: 2018
Re: WTB - Oilstone Powder
Tried to research oilstone powder. Came across Arkansas Oilstone Powder watch maker products etc. There is a company in Germany that lists it but their website, in English, doesn't show price or how to add it to a cart https://boley.de/en/shop/3766.assortmen ... one-powder
One website discusses the Holy Grail powder "The literature commonly refers to using Oilstone powder (powdered arkansas stone) for steel preparation, prior to final polishing with Diamantine (finely ground aluminium oxide powder). I have also found that using a medium grade Carborundum is a very effective first stage preparation, prior to the Oilstone powder. http://www.clickspringprojects.com/blog ... ding-paste
--
--
I found references to Arkansas Stone as being made from Novaculite mined in Arkansas
https://en.wikipedia.org/wiki/Novaculite
Because novaculite is very hard and dense, it has been mined since prehistoric times, first for use as arrow and spear points, and later to make sharpening stones. Novaculite-rich sharpening stones from Arkansas are called Arkansas stones; stones produced in the Ottoman empire (Syria, Lebanon, and Israel) were called Turkey stones;[3] and novaculite stones were also produced in Japan.
The weathered upper strata of Arkansas novaculite, known as tripoli or "rotten stone", are rich in silica and have found a niche market as a performance additive or filler in the coatings, adhesives, sealants, and elastomer industries. Tripoli is mined just east of Hot Springs, Arkansas by the Malvern Minerals Company.
--
--
Diamantine Polishing Powder 60gis available https://www.eternaltools.com/diamantine ... powder-60g
"When mixed with a drop of oil, this super fine Diamantine powder produces a fast cutting abrasive for polishing pivots and jewels, leaving you with a mirror finish. This 60g pot from Horotec is a top quality powder of fine grade aluminium oxide. Suitable for a number of polishing jobs on steel, steel alloys and jewels when watchmaking and clock making. $21.80 "
One website discusses the Holy Grail powder "The literature commonly refers to using Oilstone powder (powdered arkansas stone) for steel preparation, prior to final polishing with Diamantine (finely ground aluminium oxide powder). I have also found that using a medium grade Carborundum is a very effective first stage preparation, prior to the Oilstone powder. http://www.clickspringprojects.com/blog ... ding-paste
--
--
I found references to Arkansas Stone as being made from Novaculite mined in Arkansas
https://en.wikipedia.org/wiki/Novaculite
Because novaculite is very hard and dense, it has been mined since prehistoric times, first for use as arrow and spear points, and later to make sharpening stones. Novaculite-rich sharpening stones from Arkansas are called Arkansas stones; stones produced in the Ottoman empire (Syria, Lebanon, and Israel) were called Turkey stones;[3] and novaculite stones were also produced in Japan.
The weathered upper strata of Arkansas novaculite, known as tripoli or "rotten stone", are rich in silica and have found a niche market as a performance additive or filler in the coatings, adhesives, sealants, and elastomer industries. Tripoli is mined just east of Hot Springs, Arkansas by the Malvern Minerals Company.
--
--
Diamantine Polishing Powder 60gis available https://www.eternaltools.com/diamantine ... powder-60g
"When mixed with a drop of oil, this super fine Diamantine powder produces a fast cutting abrasive for polishing pivots and jewels, leaving you with a mirror finish. This 60g pot from Horotec is a top quality powder of fine grade aluminium oxide. Suitable for a number of polishing jobs on steel, steel alloys and jewels when watchmaking and clock making. $21.80 "
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
- Posts: 1522
- Joined: Sun Jan 06, 2019 11:47 am
- First Name: Herb
- Last Name: Iffrig
- * REQUIRED* Type and Year of Model Ts owned: 1911 Torpedo, 1918 TT Hucksters
- Location: St. Peters, MO
Re: WTB - Oilstone Powder
Harbor Freight has those diamond plate sharpeners too.
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB - Oilstone Powder
Thank you all for your tips, directions and suggestions.
I am still looking
thank you
I am still looking
thank you
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured