Wanted Kwik-Poly even partial cans
-
Topic author - Posts: 1287
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
- MTFCA Number: 49575
Wanted Kwik-Poly even partial cans
Does anyone have any kwik-poly. ? I need about 1/4 or a little less, of the original amount in the kit. As long as both parts are still liquid, it will still work for what I need it for.
dobro (at) artelco.com
dobro (at) artelco.com
-
- Posts: 3419
- Joined: Sun Jan 06, 2019 10:53 am
- First Name: Tim
- Last Name: Wrenn
- * REQUIRED* Type and Year of Model Ts owned: '13 Touring, '26 "Overlap" Fordor
- Location: Ohio
- MTFCA Number: 30701
- MTFCI Number: 24033
- Board Member Since: 2019
Re: Wanted Kwik-Poly even partial cans
I wish they would still make the stuff!
-
- Posts: 53
- Joined: Mon Jan 07, 2019 10:18 pm
- First Name: Dale
- Last Name: McMurry
- * REQUIRED* Type and Year of Model Ts owned: 1910 Roadster
- Location: Midland, TX
- MTFCA Number: 2213
- MTFCI Number: 5309
Re: Wanted Kwik-Poly even partial cans
Smiths Penetrating Epoxy will do the same thing.
-
- Posts: 4967
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- MTFCA Number: 52564
- Board Member Since: 1999
Re: Wanted Kwik-Poly even partial cans
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
-
- Posts: 228
- Joined: Sun Jan 06, 2019 11:03 pm
- First Name: Larry
- Last Name: Gresh
- Location: Berlin center Ohio
- MTFCI Number: 15762
Re: Wanted Kwik-Poly even partial cans
I have a couple extra cans if you haven’t found any.
The cans are probably about 3/4 full and have been stored in a paint cabinet. They are sill liquid and should be fine. If you need them, message me your address and I can send them out in the morning.
The cans are probably about 3/4 full and have been stored in a paint cabinet. They are sill liquid and should be fine. If you need them, message me your address and I can send them out in the morning.
-
- Posts: 3419
- Joined: Sun Jan 06, 2019 10:53 am
- First Name: Tim
- Last Name: Wrenn
- * REQUIRED* Type and Year of Model Ts owned: '13 Touring, '26 "Overlap" Fordor
- Location: Ohio
- MTFCA Number: 30701
- MTFCI Number: 24033
- Board Member Since: 2019
Re: Wanted Kwik-Poly even partial cans
Thanks Mark! Lots of good epoxy's there... I'd choose either the Smiths or the "Total Boat" Penetrating Epoxy. They both seem
similar. For me, the important part is having it thin, then expanding. Kwik Poly was great for that, once when I temporarily used it to tighten spokes until replacement, I was shocked to see how it even flowed down from the tenens in the felloe down INSIDE the spoke and then came out of an almost indistinguishable fine crack in the spoke to seal it too! Figured that may have saved the spoke from completely busting before I could send it to Stutzmans.
similar. For me, the important part is having it thin, then expanding. Kwik Poly was great for that, once when I temporarily used it to tighten spokes until replacement, I was shocked to see how it even flowed down from the tenens in the felloe down INSIDE the spoke and then came out of an almost indistinguishable fine crack in the spoke to seal it too! Figured that may have saved the spoke from completely busting before I could send it to Stutzmans.
-
Topic author - Posts: 1287
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
- MTFCA Number: 49575
Re: Wanted Kwik-Poly even partial cans
Larry, I sent you an e-mail.
-
Topic author - Posts: 1287
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
- MTFCA Number: 49575
Re: Wanted Kwik-Poly even partial cans
Mark, thanks for the link. There are some of those products I will need to try.
Larry had enough for my project. Thanks Larry, I owe you one.
Larry had enough for my project. Thanks Larry, I owe you one.