Stevens Tapered Reamers??? UPDATE
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Stevens Tapered Reamers??? UPDATE
I have been getting a number of inquiries for my Stevens Tapered Upper Reamers. I am considering another run. Due to increased cost the price is going to be in neighborhood of $250.00 + shipping.
I will need at least 7 orders for this to happen.
Email me at address in pictures to reply.
If I get enough interest I will look into another run of reamers/taps.
Thanks Dan
I HAVE 2 REAMERS LEFT as of 5/23/22.
If you want one speak now.
I will need at least 7 orders for this to happen.
Email me at address in pictures to reply.
If I get enough interest I will look into another run of reamers/taps.
Thanks Dan
I HAVE 2 REAMERS LEFT as of 5/23/22.
If you want one speak now.
Last edited by Dan Hatch on Mon May 23, 2022 1:49 pm, edited 1 time in total.
-
- Posts: 1385
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John
- Last Name: Tannehill
- Location: Hot Coffee, MS
- MTFCA Number: 49460
Re: Stevens Tapered Reamers???
You know I’m in.
-
- Posts: 1287
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
- MTFCA Number: 49575
Re: Stevens Tapered Reamers???
Dan, I'll take one. Will also send you an e-mail.
-
- Posts: 1385
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John
- Last Name: Tannehill
- Location: Hot Coffee, MS
- MTFCA Number: 49460
Re: Stevens Tapered Reamers???
Come on gals & guys we need to get to at least 7. If you have an original reamer you’re on borrowed time plus you should see the one Dan has reproduced. It’s longer so that it can be sharpened, really a quality piece and yes I’m being selfish I’d like to have at least one more before they are not available.
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers???
Up to 4 need 3 more to sign up .
-
- Posts: 37
- Joined: Tue Jan 08, 2019 7:17 pm
- First Name: BRIAN
- Last Name: CRESS
- * REQUIRED* Type and Year of Model Ts owned: Speedsters, Roadster, Hack
- Location: Bismarck, IL
- MTFCA Number: 29555
- MTFCI Number: 15565
Re: Stevens Tapered Reamers???
Hi Dan,
Russ Potter has asked me to add his name to the list.
Just two more to go!
Russ Potter has asked me to add his name to the list.
Just two more to go!
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers???
Brian got your email and another one too. We are at 6. Thanks guys . Dan
-
- Posts: 166
- Joined: Sun Jan 06, 2019 11:13 pm
- First Name: Jim, Sr.
- Last Name: Rodell
- * REQUIRED* Type and Year of Model Ts owned: 1922 coupe, 1926 touring
- Location: Wisconsin
- MTFCA Number: 2406
- MTFCI Number: 22213
Re: Stevens Tapered Reamers???
Dan, Are they the straight taper, or the spiral cut that draws itself into the hole?
1922 Coupe , 1926 Touring
-
- Posts: 178
- Joined: Sun Jan 06, 2019 7:35 pm
- First Name: Brian
- Last Name: Dowell
- * REQUIRED* Type and Year of Model Ts owned: 14 Touring 26 Runnabout 19 Canadian Touring
- Location: St. Clair Michigan
- MTFCA Number: 52162
- MTFCI Number: 205
Re: Stevens Tapered Reamers???
I'm in for one,
Brian Dowell
Brian Dowell
People who wonder if the glass is half empty or half full, miss the point. The glass is refillable.
Life is Good, be nice.
Life is Good, be nice.
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers???
Straight
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers???
Reamers will be ordered today!
I am checking on the reamer/taps.
Stay tuned for more updates. Thanks Dan
I am checking on the reamer/taps.
Stay tuned for more updates. Thanks Dan
-
- Posts: 1385
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John
- Last Name: Tannehill
- Location: Hot Coffee, MS
- MTFCA Number: 49460
Re: Stevens Tapered Reamers???
Dan thanks for doing this.
Hey Forum if you even think that you may need a reamer for your Stevens tool, you need to get in contact with Dan so he can add to the order before it’s too late. More than likely this will be a last chance opportunity. Best John
Hey Forum if you even think that you may need a reamer for your Stevens tool, you need to get in contact with Dan so he can add to the order before it’s too late. More than likely this will be a last chance opportunity. Best John
-
- Posts: 109
- Joined: Fri Nov 05, 2021 2:11 pm
- First Name: steven
- Last Name: davidson
- * REQUIRED* Type and Year of Model Ts owned: 1924 touring
- Location: Roselle NJ
- MTFCA Number: 51591
Re: Stevens Tapered Reamers???
Dan, got your email, thanks for doing this.
-
- Posts: 1287
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
- MTFCA Number: 49575
Re: Stevens Tapered Reamers???
I agree with JTT3. If you think you may ever need another set, I would get on this boat before it sails. Even with proper use the reamer's do not last forever. The original taper reamer's are made of unobtanium. Dan's taper reamer's have been the only likely way to make a Steven's Front Axle tool complete and usable. His reamer's are top notch items. Thanks Dan,for making them available one more time. Now I can have a complete back up set.
-
- Posts: 43
- Joined: Sun Jan 06, 2019 3:08 pm
- First Name: Mark
- Last Name: Wing
- * REQUIRED* Type and Year of Model Ts owned: 1910 Tourabout, 1911 touring, 1913 touring, 1924 coupe, 1925 touring
- Location: Albuquerque, NM
- MTFCA Number: 29346
Re: Stevens Tapered Reamers???
Hi Dan,
I just ran across this threat and would like to be added to the list if I'm not too late. I sent you an e-mail.
Thanks,
Mark Wing
I just ran across this threat and would like to be added to the list if I'm not too late. I sent you an e-mail.
Thanks,
Mark Wing
-
- Posts: 43
- Joined: Sun Jan 06, 2019 3:08 pm
- First Name: Mark
- Last Name: Wing
- * REQUIRED* Type and Year of Model Ts owned: 1910 Tourabout, 1911 touring, 1913 touring, 1924 coupe, 1925 touring
- Location: Albuquerque, NM
- MTFCA Number: 29346
Re: Stevens Tapered Reamers???
That should read "thread".
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers???
Back to the top. Also see reamer/tap thread. You need to let me know if you want one too.
Tapered readers all most gone.
Tapered readers all most gone.
-
- Posts: 11
- Joined: Tue Jan 08, 2019 11:33 am
- First Name: nigel
- Last Name: hugo
- * REQUIRED* Type and Year of Model Ts owned: 1911 T touring car
- Location: kenilworth england
Re: Stevens Tapered Reamers???
Hello Dan, if you have a complete kit available, the stevens tool, the tapered reamer, and the lower tapping tool. please can you let me know what you have. Many thanks. Nigel Hugo.
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers???
As of right now I think there is one tapered reamer left, reamers/taps, upper & lower inserts. Jack May have some frames. Thanks Dan
-
- Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: Stevens Tapered Reamers???
Hi Dan
I had emailed my desire for a tapered reamer and am "on the list" I believe...are you wanting payment or just another promise to buy one...I hope to not miss out. Thanks.
I had emailed my desire for a tapered reamer and am "on the list" I believe...are you wanting payment or just another promise to buy one...I hope to not miss out. Thanks.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers???
Scott you are on list. Waiting for the reamers to be made. I will start notifications when I get them in hand. Thanks Dan
-
- Posts: 107
- Joined: Sun Jan 06, 2019 1:57 pm
- First Name: john
- Last Name: hardiman
- * REQUIRED* Type and Year of Model Ts owned: 26 coupe
- Location: stoughton, ma
Re: Stevens Tapered Reamers???
Hi Dan
You have 2 threads:
1 tapered
2 front axle
Are they the same? If not what's the tapered unit used for?
Thanks
John
You have 2 threads:
1 tapered
2 front axle
Are they the same? If not what's the tapered unit used for?
Thanks
John
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers???
Not the same. Takes one of each to fix axle. Pictures worth 1000 words
https://www.youtube.com/watch?v=7DNGT7P79vg
https://www.youtube.com/watch?v=7DNGT7P79vg
-
- Posts: 148
- Joined: Sun Jan 06, 2019 5:50 pm
- First Name: Randall
- Last Name: Strickland
- Location: lambsburg va
Re: Stevens Tapered Reamers???
Dan here's one I made a while back doing it with axle still in car
https://www.youtube.com/watch?v=v9YJvzcyNHw&t=10s
https://www.youtube.com/watch?v=v9YJvzcyNHw&t=10s
-
- Posts: 11
- Joined: Tue Jan 08, 2019 11:33 am
- First Name: nigel
- Last Name: hugo
- * REQUIRED* Type and Year of Model Ts owned: 1911 T touring car
- Location: kenilworth england
Re: Stevens Tapered Reamers???
Dan, I am in for the tapered reamer, the drill and tap for the bottom hole.
Thanks, Nigel Hugo.
Thanks, Nigel Hugo.
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers??? UPDATE
See first post for updates.
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers??? UPDATE
2 left . Get on list now or lose out.
-
- Posts: 178
- Joined: Sun Jan 06, 2019 7:35 pm
- First Name: Brian
- Last Name: Dowell
- * REQUIRED* Type and Year of Model Ts owned: 14 Touring 26 Runnabout 19 Canadian Touring
- Location: St. Clair Michigan
- MTFCA Number: 52162
- MTFCI Number: 205
Re: Stevens Tapered Reamers??? UPDATE
Dan
I was on the list I believe for the reamer! I would also like the reamer tap.
Please let me know!
Brian
586 864 5110
I was on the list I believe for the reamer! I would also like the reamer tap.
Please let me know!
Brian
586 864 5110
People who wonder if the glass is half empty or half full, miss the point. The glass is refillable.
Life is Good, be nice.
Life is Good, be nice.
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers??? UPDATE
Email sent . Thanks Dan
-
- Posts: 626
- Joined: Sun Jan 06, 2019 12:47 pm
- First Name: Frank
- Last Name: Seress
- * REQUIRED* Type and Year of Model Ts owned: 1912 Towncar, 1915 Touring
- Location: Prescott, Arizona
- MTFCA Number: 27707
Re: Stevens Tapered Reamers??? UPDATE
Dan, how much will it cost me for an upper tapered reamer and for the lower reamer/tap.
Frank
Frank
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers??? UPDATE
Prices are in first post of each thread.
Upper $250.00
Lower $200.00
+ shipping
If you want a set email me at address in pictures ASAP.
Thanks Dan
Upper $250.00
Lower $200.00
+ shipping
If you want a set email me at address in pictures ASAP.
Thanks Dan
-
- Posts: 109
- Joined: Fri Nov 05, 2021 2:11 pm
- First Name: steven
- Last Name: davidson
- * REQUIRED* Type and Year of Model Ts owned: 1924 touring
- Location: Roselle NJ
- MTFCA Number: 51591
Re: Stevens Tapered Reamers??? UPDATE
Dan, will we be able to purchase tapered and threaded inserts from you when the reamers are ready?
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers??? UPDATE
Yes I have them in stock
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers??? UPDATE
Back to the top
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers??? UPDATE
Have a couple left
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Stevens Tapered Reamers??? UPDATE
Still have one set left!
-
- Posts: 626
- Joined: Sun Jan 06, 2019 12:47 pm
- First Name: Frank
- Last Name: Seress
- * REQUIRED* Type and Year of Model Ts owned: 1912 Towncar, 1915 Touring
- Location: Prescott, Arizona
- MTFCA Number: 27707
Re: Stevens Tapered Reamers??? UPDATE
Dan, do you have any tapered reamers left? I would like one please. Also a couple set of inserts to go with that when the reamers are ready.
Frank
Frank