Ball bearing Rear end thrust FS New Price
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Ball bearing Rear end thrust FS New Price
Here is a set of aftermarket Ball Bearing Thrust bearings. They maybe NOS no sure. There 2 of the ball bearings plate and 7 of the race plates. Ran them through the vibration tumbler to remove the surface rust. Can they be used? That will be up to new owner. $20 + shipping. Email me at address in pictures. Thanks Dan
Last edited by Dan Hatch on Fri Jul 29, 2022 9:42 am, edited 1 time in total.
-
- Posts: 5259
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: Ball bearing Rear end thrust FS
Dan, are the 7 solid plates different thicknesses? That would allow some adjustment within the pumpkin when assembling the diff centre. Just curious.
Allan from down under.
Allan from down under.
-
- Posts: 3873
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- MTFCA Number: 14383
- Board Member Since: 2020
Re: Ball bearing Rear end thrust FS
They mount on the stock thrust washer pins. You can add shims to tighten the gear clearance.
If too tight, you get creative. remove material from the carrier or surface grind the race plates.
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Ball bearing Rear end thrust FS
Do not know, have not measured them. Here is copy of ad for them. Thanks to Dan T for posting it in other forum.
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Ball bearing Rear end thrust FS
No interest in these? Off to china I guess.
-
Topic author - Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Ball bearing Rear end thrust FS
Hate to scrap