MTFCA Forum

Here's a couple photos of ONE of my walls with Model T goodies - drop me a note regarding anything that you might like to have EXCEPT the Stevens, Ford wrenches & tools - I'm negotiable for the most part ! Drop me a note through the Forum, please unless you already have my email.

Updated photos - red circles not available.

Wasn't someone looking for a magneto gap gage just a week or two ago?

No tools for sale - just "goodies" !

Steve,

Sent you an email

Steve,
sent you some emails

Sent you an e-mail.

Craig

Got them all, fellas - I responded - thanks for looking !

Looking @ the first picture I noticed @ the lower left that Blue/White metal sign, Ford Farts? I have not seen one of those before

Steve, I could be interested in the ring gears if they are in good useable condition.

They're matched sets Larry - one 3 to 1 and the other is standard - the "orphan" is a 39 tooth, I believe.

Afternoon, would you have a set of straight cut timing gears? Thanks.

I'll look - not on the wall though - I'll check my bins.

Received my goodie; thanks!

Thanks for looking.

RajoRacer wrote: ↑

Thu Oct 20, 2022 4:32 pm

I'll look - not on the wall though - I'll check my bins.

Back to the top for the week-end - thinned it out a bit but plenty left !

in the first photo , top left corner looks like a cast hot air pipe. its between a license plate hanger with a stop lt and a brass steering gear cover. is it a tin one or a cast one. please let me know and cost. thank you dan

All tin - no cast.

thank you for the reply. how much is the tin one? thanks

Steve, That's just being mean. Showing me those Stevens tools and not selling them. Please remember me if you have any duplicate Stevens tools.

Sorry Donnie - I should have pulled the tools down but my tool board is spilling over !

I'd like to thank the folks who contacted me for some goodies and followed through - It would be greatly appreciated for those who I spent the time to take & send photos, to have gotten a response or a kiss my A_ _ or something !

Back up - I had some email problems due to our provider attempting an "upgrade" - not so much ! I'll try to update the photos but lots of goodies left.

Steve, how good is the orphan 39 tooth ring gear? I need one for my current project.

Allan from down under.

I'll send you a note.

Christmas is coming - lots more goodies to be had !

Any 3:1 or 3:25 gears or gear sets? How about the pitman arms?

Stephen, the 39 tooth ring gear will give you 3:1 with a 13 tooth pinion and 3.25 : 1 with a 12 tooth pinion. Chaffins have both pinions in their catalog.

Hope this helps,
Allan from down under.

Steve , I hear your frustration abut being ghosted after spending time sending photos, descriptions, etc. When that happens to me, which it has recenlty, I vow never to deal that person again. I recall how Stan Howe would get steamed when he encountered rudeness. The sad thing is it has almost become accepted behavior.

How true Richard !

I sent you an email Stephen - no reply ?