New NH and Vaporizor Float Valve install tool available

Post parts wanted or for sale here

Topic author
Scott_Conger
Posts: 2709
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
Location: Clark, WY
Board Member Since: 2005

New NH and Vaporizor Float Valve install tool available

Post by Scott_Conger » Fri Jan 10, 2020 6:59 pm

This will install or remove my Full Flow Float Valve or the common commercial valve offered by vendors for your NH or Vaporizor carburetor. It will NOT work correctly on original valves as the pilot is a different size, nor will it work on Grose Valves. They come out with a screwdriver anyway, with a little damage, or in the case with the Grose valve, a nut-driver.

This tool will not slip off the valve, risking damage to the valve upon installation like a simple screwdriver will.

I have tried to keep the price down, so while the drive-dog is hardened, the rest of the tool is NOT hardened. However, I believe it will hold up just fine unless intentionally abused, and even then I suspect it will take it's share and shrug it off.

I am only making 10 to start and will only start if there is interest, and the first one may already be spoken for. So, contact me via email to get on a list and if there are 10 enough folks in a reasonable time, I will make them and deliver them to your door for $35.

So note: This is Pre-Order only at this time, to gauge interest. I will stay in contact with you and give thumbs-up or down, based on response.

Please email your response to me, so that I can keep track. Thank you and Thanks for looking.

Float Valve install_removal tool.gif
Last edited by Scott_Conger on Fri Jan 10, 2020 10:53 pm, edited 3 times in total.
Scott Conger

Full Flow Float Valves - deliver fuel like Henry intended!


Bill Anziani
Posts: 109
Joined: Sun Jan 06, 2019 2:42 pm
First Name: Bill
Last Name: Anziani
Location: Concord, NC

Re: New NH and Vaporizon Float Valve install tool available

Post by Bill Anziani » Fri Jan 10, 2020 7:04 pm

Scott, I will take one of your tools


Dan Hatch
Posts: 1125
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: New NH and Vaporizon Float Valve install tool available

Post by Dan Hatch » Fri Jan 10, 2020 7:09 pm

Put me on the list. Dan


Jeepbone1
Posts: 311
Joined: Sun Jan 06, 2019 6:10 pm
First Name: Brad
Last Name: Kirtner
Location: Salem, Virginia
MTFCA Number: 50618
Board Member Since: 2018

Re: New NH and Vaporizon Float Valve install tool available

Post by Jeepbone1 » Fri Jan 10, 2020 7:10 pm

I’ll take one too.

Brad


pcarreras
Posts: 6
Joined: Sun Dec 01, 2019 8:05 pm
First Name: Paul
Last Name: Carreras
Location: Bumpass Virginia
MTFCA Number: 14727
MTFCI Number: 13768

Re: New NH and Vaporizon Float Valve install tool available

Post by pcarreras » Fri Jan 10, 2020 7:29 pm

I would like to get one of your float valve tools.

Paul Carreras


Mike Lebsack-Iowa
Posts: 159
Joined: Sun Jan 06, 2019 10:22 pm
First Name: Mike
Last Name: Lebsack
Location: Iowa
Board Member Since: 2008

Re: New NH and Vaporizon Float Valve install tool available

Post by Mike Lebsack-Iowa » Fri Jan 10, 2020 7:39 pm

Hey Scott,
Got your valves, better have a tool too. Mike Lebsack


StanHowe
Posts: 672
Joined: Mon Jan 07, 2019 5:42 pm
First Name: Stan
Last Name: Howe
Location: Helena, MT
MTFCA Number: 19133
Board Member Since: 1999

Re: New NH and Vaporizon Float Valve install tool available

Post by StanHowe » Fri Jan 10, 2020 10:29 pm

Good for you. Jack Daron made a similar tool for years but he is no longer with us.
Someone made me a tool for removing the lower jet in Holley G's and sent it to me years ago.
It is a great tool. One end removed the float valve and the other the bottom jet.

So here is free method advice.
Chuck the tool in your drill press chuck. Hold the carb in a vise. Apply down pressure while turning the tool handle. The pressure will keep the tool from slipping.


sweet23
Posts: 163
Joined: Sun Jan 06, 2019 1:19 pm
First Name: Darryl
Last Name: Bobzin
Location: Kannapolis,NC
MTFCA Number: 27211
Board Member Since: 2016

Re: New NH and Vaporizor Float Valve install tool available

Post by sweet23 » Fri Jan 10, 2020 10:59 pm

Put me down for one of these tools please. Darryl


BHarper
Posts: 108
Joined: Sun Jan 06, 2019 11:15 am
First Name: Bill
Last Name: Harper
Location: Keene, New Hampshire
MTFCA Number: 5414
MTFCA Life Member: YES
Board Member Since: 1999

Re: New NH and Vaporizor Float Valve install tool available

Post by BHarper » Sat Jan 11, 2020 1:11 am

Hello Scott,

I will buy one of your Float Valve tools AND a float valve, too.

Sending an email as well. Thank you, Bill.


GG Gregory
Posts: 96
Joined: Sat Jul 20, 2019 3:05 pm
First Name: GG
Last Name: Gregory
Location: Maryville Tn

Re: New NH and Vaporizor Float Valve install tool available

Post by GG Gregory » Sat Jan 11, 2020 8:40 am

Email sent


Perry Goble
Posts: 39
Joined: Thu Mar 07, 2019 3:26 pm
First Name: William
Last Name: Goble
Location: burnet tx
MTFCA Number: 31190
MTFCI Number: 24534

Re: New NH and Vaporizor Float Valve install tool available

Post by Perry Goble » Sat Jan 11, 2020 9:13 am

Hi Scott I will buy one as will . what is your email ?


mtntee20
Posts: 217
Joined: Sun Jan 06, 2019 2:51 pm
First Name: Terry & Sharon
Last Name: Miller
Location: Westminster, CO
MTFCA Number: 32583
Board Member Since: 2017

Re: New NH and Vaporizor Float Valve install tool available

Post by mtntee20 » Sat Jan 11, 2020 9:58 am

Hi Scott,

As Mike and others above have said: I have your High Flow Valves. I haven't used them yet but still plan on doing so. I would like to have one of your tools as well. I know I am the tenth in line and you already said #1 may be spoken for, thus, I may have to wait until the second batch. OR, you might consider making eleven and a little more cash.

Thank You, My Friend,
Terry Miller


Topic author
Scott_Conger
Posts: 2709
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
Location: Clark, WY
Board Member Since: 2005

Re: New NH and Vaporizor Float Valve install tool available

Post by Scott_Conger » Sat Jan 11, 2020 11:01 am

Thank you all for your responses. This first order will go ahead.

I will commit to making tools to fill requests up to Terry Miller. Further requests will be put on a waiting list, which hopefully will be filled without too much delay.

thank you all for looking
Scott Conger

Full Flow Float Valves - deliver fuel like Henry intended!


Graybeard77
Posts: 64
Joined: Sun Jan 06, 2019 1:06 pm
First Name: Clyde
Last Name: Gibson
Location: Springfield, MO
MTFCA Number: 32266

Re: New NH and Vaporizor Float Valve install tool available

Post by Graybeard77 » Sat Jan 11, 2020 12:44 pm

I have the float valve you made so I will take the tool also. Clyde Gibson


Graybeard77
Posts: 64
Joined: Sun Jan 06, 2019 1:06 pm
First Name: Clyde
Last Name: Gibson
Location: Springfield, MO
MTFCA Number: 32266

Re: New NH and Vaporizor Float Valve install tool available

Post by Graybeard77 » Sat Jan 11, 2020 12:45 pm

I have the float valve you made so I will take the tool also. Clyde Gibson


tom_strickling
Posts: 173
Joined: Tue Jan 08, 2019 10:31 am
First Name: Tom
Last Name: Strickling
Location: New Philadelphia Ohio

Re: New NH and Vaporizor Float Valve install tool available

Post by tom_strickling » Sat Jan 11, 2020 1:45 pm

I would also like one of these tools. Thanks for making them.

Tom Strickling


Jsteele
Posts: 73
Joined: Sun Jan 06, 2019 11:25 am
First Name: John P.
Last Name: Steele
Location: Montana
MTFCA Number: 374
MTFCA Life Member: YES
MTFCI Number: 137

Re: New NH and Vaporizor Float Valve install tool available

Post by Jsteele » Sat Jan 11, 2020 3:14 pm

Scott I would like to purchase one also.
Thank you,
John


tmagill
Posts: 25
Joined: Tue Jan 08, 2019 5:48 am
First Name: Tim
Last Name: Magill
Location: Bedford In
MTFCA Number: 4444

Re: New NH and Vaporizor Float Valve install tool available

Post by tmagill » Sat Jan 11, 2020 4:09 pm

Scott I would take one too if available thanks Tim


tman12
Posts: 64
Joined: Fri Jan 11, 2019 12:31 pm
First Name: john
Last Name: Willams
Location: Cedar Rapids Iowa
MTFCI Number: 20566

Re: New NH and Vaporizor Float Valve install tool available

Post by tman12 » Sat Jan 11, 2020 5:56 pm

Scott: Hi From Iowa! Since I already have 2 of your nice valves I guess you can put me down for one of the tools! No Hurry - John


tleroux
Posts: 16
Joined: Mon Jan 21, 2019 10:00 pm
First Name: tom
Last Name: leroux
Location: home
Board Member Since: 2010

Re: New NH and Vaporizor Float Valve install tool available

Post by tleroux » Sat Jan 11, 2020 10:15 pm

SCOTT
PUT ME ON LIST
TOM LEROUX
HOISTSERVICEINC@CA.RR.COM


dmdeaton
Posts: 249
Joined: Mon Oct 21, 2019 9:43 pm
First Name: Danny
Last Name: Deaton
Location: Ohio

Re: New NH and Vaporizor Float Valve install tool available

Post by dmdeaton » Fri Jan 24, 2020 9:49 am

Scott
Put me on the list


Wayne Mims
Posts: 48
Joined: Sun Jan 13, 2019 11:49 am
First Name: Ervin
Last Name: Mims
Location: Las Vegas
MTFCA Number: 29375

Re: New NH and Vaporizor Float Valve install tool available

Post by Wayne Mims » Fri Jan 24, 2020 9:59 am

Put me on the list to please


Graybeard77
Posts: 64
Joined: Sun Jan 06, 2019 1:06 pm
First Name: Clyde
Last Name: Gibson
Location: Springfield, MO
MTFCA Number: 32266

Re: New NH and Vaporizor Float Valve install tool available

Post by Graybeard77 » Fri Jan 24, 2020 11:47 am

I will take one of your tools. I already have your float valves

Post Reply Previous topicNext topic