For Sale: KRW Combination Machine Half Nut

Post parts wanted or for sale here

Topic author
Jack Putnam, in Ohio
Posts: 172
Joined: Sun Jan 06, 2019 7:19 pm
First Name: Jack
Last Name: Putnam
Location: Bluffton, Ohio
MTFCA Number: 13833
MTFCI Number: 13353

For Sale: KRW Combination Machine Half Nut

Post by Jack Putnam, in Ohio » Sun Mar 24, 2019 7:40 pm

For Sale: Combination machine half-nut. This is the nut that engages the driving shaft when boring or reaming on the machine. It was made of brass and very fine threaded. It was probably design to shear if the rotation was blocked or stalled. It also will wear out. The thread is 3/4 x 36 tpi, which is not a deep thread. I had to replace one on my machine and I had some extra cast in silicone bronze. If you are in need or just want a spare for your KRW Combination machine now is your chance. $165 plus $8.00 for USPS . I will accept check or PayPal (preferred). jputnam@wcoil.com.
Attachments
20190324_163328.jpg
20190324_163313.jpg
20190324_163307.jpg
20190324_130032.jpg


Dan Hatch
Posts: 1818
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: For Sale: KRW Combination Machine Half Nut

Post by Dan Hatch » Mon Mar 25, 2019 10:24 am

Email sent. Thanks, Dan.


Topic author
Jack Putnam, in Ohio
Posts: 172
Joined: Sun Jan 06, 2019 7:19 pm
First Name: Jack
Last Name: Putnam
Location: Bluffton, Ohio
MTFCA Number: 13833
MTFCI Number: 13353

Re: For Sale: KRW Combination Machine Half Nut

Post by Jack Putnam, in Ohio » Sun Mar 31, 2019 9:31 am

Still have a couple available.


Topic author
Jack Putnam, in Ohio
Posts: 172
Joined: Sun Jan 06, 2019 7:19 pm
First Name: Jack
Last Name: Putnam
Location: Bluffton, Ohio
MTFCA Number: 13833
MTFCI Number: 13353

Re: For Sale: KRW Combination Machine Half Nut

Post by Jack Putnam, in Ohio » Wed May 08, 2019 9:32 pm

BTT

Post Reply Previous topicNext topic