Page 1 of 1
WTB: Aftermarket Cast Iron Head
Posted: Mon May 01, 2023 8:09 pm
by Schrep771
Looking to purchase an after market cast iron head, Giant, Haibe, Green engineering, Waukesha-Ricardo, etc.
Any leads appreciated, will be in Luray.
Thanks Steve
Re: WTB: Aftermarket Cast Iron Head
Posted: Tue May 02, 2023 9:16 am
by JvanMaanen
Steve, I have a new in the box Lizard cast Iron head. I bought it as part of the first run, was supposed to be #3, but as far as I can tell the numbering never happened, I sure can't find a number on it. I have heard good and bad about this head. I have no personal experience with them and don't personally know anyone who has run one. email me if you are interested.
Van
Re: WTB: Aftermarket Cast Iron Head
Posted: Tue May 02, 2023 4:32 pm
by NorthSouth
Steve,
I have a Himico cast-iron Ford head in excellent condition with a new set of the longer bolts.
My telephone number is three 2 three and four 97 and zero 6 and zero 1
Re: WTB: Aftermarket Cast Iron Head
Posted: Tue May 02, 2023 6:24 pm
by NorthSouth
Above: NorthSouth’s Himico Head
Re: WTB: Aftermarket Cast Iron Head
Posted: Tue May 02, 2023 6:25 pm
by NorthSouth
NorthSouth’s Himico Head
Re: WTB: Aftermarket Cast Iron Head
Posted: Tue May 02, 2023 6:43 pm
by Joe Bell
I have been running one of those heads for years, only problem was the 280 cam and bigger valves you have to do some work for clearance.
Re: WTB: Aftermarket Cast Iron Head
Posted: Tue May 02, 2023 6:56 pm
by got10carz
Joe, what spark plugs are you using?
Re: WTB: Aftermarket Cast Iron Head
Posted: Tue May 02, 2023 9:49 pm
by Joe Bell
A25 fit mine, some heads use the Model A plug
Re: WTB: Aftermarket Cast Iron Head
Posted: Sun May 07, 2023 8:57 pm
by Schrep771
Bump...to the...Top