Page 1 of 1
KR Wilson Combination Table
Posted: Tue Dec 17, 2024 2:23 pm
by RajoRacer
Any interest in JUST the table, gearbox & pullies for this ? I'm keeping the legs for my homemade pan jig. I'll take a reasonable offer & can strap it to a pallet - hate to scrap it !
Re: KR Wilson Combination Table
Posted: Tue Dec 17, 2024 2:50 pm
by Dan Hatch
If I didn’t already have 3 of them I would be interested.
If you do scrap it, please save the gearbox. I have had people ask me for gears. Dan.
Re: KR Wilson Combination Table
Posted: Wed Dec 18, 2024 9:19 am
by Gene_French
Steve:
sent an email regarding re-purposing the table portion as a machine base for a large spindle bore short bedway lathe ... i would not be using the gear box and this could be sent along to another user ... let me know if this is still available and the freight cost to northern Colorado ... fastenal in Cheyenne is nearby ...Gene French
Re: KR Wilson Combination Table
Posted: Wed Dec 18, 2024 10:06 am
by RajoRacer
I have an interested party for the gearbox & pulleys Gene - if I can figure out the weight of the table, I'll see about getting a shipping quote.
Re: KR Wilson Combination Table
Posted: Sun Dec 22, 2024 6:58 pm
by dobro1956
If you still have it I would be interested in the drive plate and clutch handle and 1/2 nuts if you part it out.
Re: KR Wilson Combination Table
Posted: Sun Dec 22, 2024 7:02 pm
by 1925 Touring
At the risk of sounding nieve, what does the combination table do?
Re: KR Wilson Combination Table
Posted: Sun Dec 22, 2024 7:44 pm
by TrentB
A complete KR Wilson setup is used to pour, bore and align ream Model T and A main bearings.
Re: KR Wilson Combination Table
Posted: Sun Dec 22, 2024 10:47 pm
by Dan Hatch
It is easier to say what a Combination machine doesn’t do.
Re: KR Wilson Combination Table
Posted: Mon Dec 23, 2024 7:17 am
by Dennis Fleming
Steve ,
I sent you an email.
Thanks and Merry Christmas