Page 1 of 1
Wanted: 34x4 or 35x4 1/2" CLINCHER Tires
Posted: Tue Jul 08, 2025 9:40 pm
by GGZ
I know these aren't for Model Ts, but, you never know....I need 34x4 or 35x4 1/2 CLINCHER tires for 26" wheels. Condition could be fair to excellent. I can use one to five. I don't want straight side, I have a new set of those . I could also trade the new straight side 34×4 set for a new set of 875x105 clinchers. Thanks. Email at motoringicons (at) hotmail (dot) com or call me at 734 - 730 - 4274
Re: Wanted: 34x4 or 35x4 1/2" CLINCHER Tires
Posted: Tue Jul 08, 2025 10:24 pm
by got10carz
Watching with much interest.
Re: Wanted: 34x4 or 35x4 1/2" CLINCHER Tires
Posted: Tue Jul 08, 2025 11:29 pm
by GGZ
I doubt anything will happen, but it's worth asking!! I do have a Plan B!
Re: Wanted: 34x4 or 35x4 1/2" CLINCHER Tires
Posted: Thu Jul 10, 2025 2:08 pm
by Mark Gregush
Plan B might be to place a wanted ad on the Horseless Carriage Club website. You don't have to be a member to do so. In fact you might look at the listings, some of the off types of tires have been posted there.
https://hcca.org/resources/classified/
Re: Wanted: 34x4 or 35x4 1/2" CLINCHER Tires
Posted: Fri Jul 11, 2025 3:58 pm
by OldFord
Guy, Does your clincher rim reverse to allow you to use straight side tires? I have a set of 5 nearly new Lester 34x4 white walls...
Frank
Re: Wanted: 34x4 or 35x4 1/2" CLINCHER Tires
Posted: Fri Jul 11, 2025 6:17 pm
by GGZ
No. They do not have any removable lock rings. One piece rims just like a Model T but 26".I have a set of new Coker 34x4 but they are straight side.