Page 1 of 1
brass valve stems and dust covers.
Posted: Sun Aug 17, 2025 1:01 am
by Allan
5 original Schraeder combos. All are the thinner model T size, 3 number 888s and two number 777s. Complete stems with correct bridge washers, stem nuts, dust cover nuts and dust covers. The two lower ones have inconsequential wear marks in the stem threads, as shown. $125 with tracked postage to your door. Paypal for payment
.
Allan from down under.
Re: brass valve stems and dust covers.
Posted: Sun Aug 17, 2025 7:59 am
by Tim Hansen
PM Sent Allan
Re: brass valve stems and dust covers.
Posted: Sun Aug 17, 2025 8:09 pm
by Allan
Sorry Tim, this lot sold and paid for. I do have a similar set with the large diameter stems available. Same price.
Allan from down under.
Re: brass valve stems and dust covers.
Posted: Sun Aug 17, 2025 11:05 pm
by South Park Zephyr
If Tim is not interested in the larger ones,
I am
Scott
Re: brass valve stems and dust covers.
Posted: Mon Aug 18, 2025 7:53 am
by Allan
Email sent Scott.
Allan from down under.
Re: brass valve stems and dust covers.
Posted: Mon Aug 18, 2025 8:13 am
by South Park Zephyr
Allen, I responded with a quick question about shipping
Scott
Re: brass valve stems and dust covers.
Posted: Mon Aug 18, 2025 10:47 am
by Original Smith
Something that is important is the bridge washers. The repros are not correct.
Re: brass valve stems and dust covers.
Posted: Mon Aug 18, 2025 8:32 pm
by Allan
Email sent Scott. Nothing reproduction here Original. Some bridge washers have a brass ridge fitted to make the crush ring.
Re: brass valve stems and dust covers.
Posted: Tue Aug 19, 2025 11:36 am
by South Park Zephyr
Payment set via PayPal
Thanks
Scott