Page 1 of 1

1911 parts

Posted: Fri Jul 19, 2019 12:14 pm
by Michael Paul
Yes, enough to build a car. Correct engine, 60,000 serial number range. Clam shell rear end, two piece drive shaft, 7 rivet pan, low head with out made in USA , 11 frame, correct running boards, hub caps, steering column is correct for 1911, the one that was made just after the 09/10 and before the late 11-12 offset hole style. Nice radiator, small dent in tank and blemish on the find but excellent core. Correct hogs head with lettered pedals. Body needs wood completed, I have original wood parts to copy.
Asking $14 k for the lot. Don't want to part out!
Email or call for more information and photos.

Re: 1911 parts

Posted: Sat Jul 20, 2019 10:55 am
by Michael Paul
Forgot to mention that I have a windshield and top bows that goes with it. Also engine appears to be rebuilt, I took it off from the pan and the Babbitt on the rods and the crank appear to be fairly new. My plan was to pull the Pistons back out rehome the cylinders and clean the rings all up before trying to start it. The transmission looks in great condition also.

This will make a great restoration project for somebody I've been collecting parts for years. Only reason for selling is to fund my 09 and other 1911 project. Give me a call or email for more photos.
Have a great day! Mike

Re: 1911 parts

Posted: Mon Jul 22, 2019 9:46 am
by Michael Paul
Here's a photo of the inside. I loosened one rod, the Babbitt looks good. I hate to part it out.
Have a great day

Re: 1911 parts

Posted: Mon Jul 22, 2019 11:04 am
by rgould1910
If you decide to part it out, I'd be interested in the head and steering column.

Re: 1911 parts

Posted: Mon Jul 22, 2019 2:06 pm
by Michael Paul
I may go that route.

I would have to have most of the parts committed to before I started selling things.

Here's what I'm thinking
Body, 3000
Engine with pan and transmission, hogshead. 5000
Rear end with 2-piece driveshaft 3000
Steering column 850
Top Bows 500
Wheels with hubcaps 500
Front axle 250
All of the lights 750
Radiator 800
Hood 200
Firewall with hood former 175
Windshield 400
Side light and tail light bracket 75
Running boards (11/12 with correct script) 175
Frame with running board brackets 650
Front fender brackets 125
Rear fender brackets 75
Rear fenders excellent originals with original paint 700

Re: 1911 parts

Posted: Mon Jul 22, 2019 3:47 pm
by modeltbarn
Hi Mike.

I sent you a couple of emails about the windshield, rear fenders, running boards, and side lamp brackets.

Gary London

Re: 1911 parts

Posted: Mon Jul 22, 2019 4:08 pm
by modeltbarn
OK, another post on the parts.... I'd like the frame too, and will pass on the windshield. Gotta save somewhere!

Gary

Re: 1911 parts

Posted: Mon Jul 22, 2019 4:09 pm
by Tbird
Sent you an email about the steering column
Mike Bird

Re: 1911 parts

Posted: Mon Jul 22, 2019 5:33 pm
by TRZim
What is make of windshield, a picture would be nice. What are make and model number of side and tail lights?

Re: 1911 parts

Posted: Mon Jul 22, 2019 9:26 pm
by Michael Paul
Hi, thanks for all of the emails, the windshield is a Rands. I'll send more engine photos tomorrow.
The side lights and tail lite are E&J

Re: 1911 parts

Posted: Fri Jul 26, 2019 3:30 pm
by Michael Paul
Here's a photo of the serial number

Re: 1911 parts

Posted: Sat Aug 03, 2019 11:14 am
by Michael Paul
Good morning, the rear fenders are sold.
I'll take 2,000 for just the rearend without the driveshaft. 500 for the driveshaft.
Have a great day, Mike

Re: 1911 parts

Posted: Sat Aug 03, 2019 11:20 am
by brassford
Is the body sold?

Re: 1911 parts

Posted: Sat Aug 03, 2019 12:48 pm
by Michael Paul
No body is not sold yet, I have several interested.
Also I should have said top sockets not bows. I have a few sets, some are 1913 I think

Re: 1911 parts

Posted: Sat Aug 03, 2019 3:37 pm
by Michael Paul
Steering column is sold.

Re: 1911 parts

Posted: Sat Aug 03, 2019 11:36 pm
by Nikko012
Hi Michael
Sent e-mail for parts,
Thanks Ray

Re: 1911 parts

Posted: Sun Aug 04, 2019 8:33 am
by Tbird
Michael,
I sent you an email about the windshield. mikebird@lifeattheridge.net
Thanks
Mike Bird

Re: 1911 parts

Posted: Sun Aug 04, 2019 12:25 pm
by Michael Paul
The windshield, frame with running board brackets and the rear fender brackets are sold.
I'm getting requests to part out the engine. Engine, transmission, head $4,400.. hogs head with very good pedals, $200. I guess I'll just keep the 7 rivet pan for now. I also have 1913 steering column, $500.

Re: 1911 parts

Posted: Sun Aug 04, 2019 12:29 pm
by Michael Paul
Still have the 1911 flat tube core radiator. It has a small dent in the tank but the core is excellent. Should be a great driver radiator!

Re: 1911 parts

Posted: Sun Aug 04, 2019 2:26 pm
by Michael Paul
Found an extra original 1911 touring front seat. $750 I would take $2500 for the body in the photos but that's about it. Also a 1912 Rands windshield with a shorter top section. $450

Re: 1911 parts

Posted: Mon Aug 05, 2019 6:12 pm
by Michael A
Hi Michael,
Are the side light brackets still available
Michael A

Re: 1911 parts

Posted: Tue Aug 06, 2019 6:36 am
by Terry Irish
Do you have anyone that could transport engine to Hershey?

Re: 1911 parts

Posted: Tue Aug 06, 2019 1:18 pm
by KWTownsend
Michael-
Do you still have that top boot or pattern available?

-Keith

Re: 1911 parts

Posted: Tue Aug 06, 2019 3:38 pm
by Michael Paul
Yes the engine shipped to Hershey for $300
Body is sold, the extra front seat is still available.

Re: 1911 parts

Posted: Tue Aug 06, 2019 3:39 pm
by Michael Paul
Yes I have the top boot

Re: 1911 parts

Posted: Tue Aug 06, 2019 9:45 pm
by KWTownsend
Email sent.

Re: 1911 parts

Posted: Tue Aug 06, 2019 11:41 pm
by Michael Paul
Yes I have a friend going to Hershey, he will haul the engine there for $300
I've had several people interested, no one has committed yet. It seems ashame to start parting it out. It has the correct heavy valve covers also.

Re: 1911 parts

Posted: Wed Aug 07, 2019 1:09 am
by Michael Paul
I have the side lamp brackets, I think they are repo.

Re: 1911 parts

Posted: Thu Aug 08, 2019 11:15 am
by Michael Paul
2 piece driveshaft is sold, radius rods are sold, still have the radiator($750) firewall($100) hood former($100), hood ($100), firewall brackets ($75) , nice engine block with crank, pistons valves ( $3800) low head without made in USA ($300) 1911 transmission ($350) early stamped magneto ring with magnets($300) excellent hogshead with sharp lettering on pedals ($225) seven rivet pan ($500) note: I won't sell any of the engine components until the engine block is sold. it's crazy to part out an engine like this?? How about $4200 for the engine with the parts I listed, that would be $4500 delivered to Hershey. Still have front axel, wheels, original hubcaps, side lamps, tail lamp, headlights, 12 rivet clamshell rearend, front and rear tapered springs.

Re: 1911 parts

Posted: Thu Aug 08, 2019 11:55 am
by TRZim
I would like the low head for the 11.

Re: 1911 parts

Posted: Thu Aug 08, 2019 5:35 pm
by Walter Higgins
Email sent regarding the hubcaps. Thanks.

Re: 1911 parts

Posted: Thu Aug 08, 2019 9:25 pm
by Bill Everett
E-mail sent about the lights and both springs.

Re: 1911 parts

Posted: Fri Aug 09, 2019 12:04 pm
by Michael Paul
Everything has been sold pending payment except the 12 rivet rear end, and the set of lights, They are e&j the headlights have a plain bonnet. I think Bill inquired first. I did find an extra hood former for the person who inquired first.
Thank you mtfca!

Re: 1911 parts

Posted: Fri Aug 09, 2019 12:08 pm
by TRZim
did you get my email re. low head? did not hear back from you.

Re: 1911 parts

Posted: Fri Aug 09, 2019 12:51 pm
by Michael Paul
Yes I did receive the email on the low head, I wasn't going to sell any of the engine parts until the block was sold, that was probably lost in my post, sorry. The engine was purchased as one unit all together, so it wasn't parted out.
If I find another head in my container, I'll send you an email.
Thanks again to mtfca and everyone who responded.

Re: 1911 parts

Posted: Fri Aug 09, 2019 4:17 pm
by Walter Higgins
Hi Micheal,

I sent an you email through your forum profile regarding the hub caps but haven't heard back. Might check your spam folder if you haven't seen it.

Thanks,

-Walter

Re: 1911 parts

Posted: Fri Aug 09, 2019 5:02 pm
by Michael Paul
Sorry the hub caps were sold with the wheels

Re: 1911 parts

Posted: Fri Aug 09, 2019 5:45 pm
by Walter Higgins
No worries. Thanks for the reply.

Re: 1911 parts

Posted: Sun Aug 11, 2019 7:39 pm
by Psainslie
Walter. If the person who wants the steering column falls thru I will purchase it. Thanks. Pat

Re: 1911 parts

Posted: Sun Aug 11, 2019 9:00 pm
by Walter Higgins
Psainslie wrote:
Sun Aug 11, 2019 7:39 pm
Walter. If the person who wants the steering column falls thru I will purchase it. Thanks. Pat
Sorry, but I'm not the seller. Scroll up....

Re: 1911 parts

Posted: Sun Aug 11, 2019 11:59 pm
by modeltbarn
Hi Pat

I'm the one buying the column, and the check is going out in the morning.

Re: 1911 parts

Posted: Mon Aug 12, 2019 11:10 am
by Psainslie
Thanks and I’m glad you got it. I want to then use this opportunity to reach out and see if any one else make have a 1910-1911 steering column for sale. Thanks Pat

Re: 1911 parts

Posted: Tue Aug 13, 2019 6:23 am
by andrew o sullivan
hi there I have an interest in the rear axle thanks aosconstruction@gmail.com

Re: 1911 parts

Posted: Tue Aug 13, 2019 10:18 am
by Michael Paul
Hi, still have the rear axel, I've sold the driveshaft and radius rods. The axel comes with the axel's and differential. I would take $2000 delivered to Hershey.
Thanks, Mike

Re: 1911 parts

Posted: Tue Aug 13, 2019 3:40 pm
by andrew o sullivan
yes Michael ill take the axel thanks

Re: 1911 parts

Posted: Thu Aug 15, 2019 1:57 pm
by Michael Paul
The 12 rivet clamshell rearend is spoken for pending payment. Thanks mtfca!