Page 1 of 1

KR Wilson Combination Machine Clutch Drive Screw Drawings

Posted: Mon Oct 21, 2019 4:03 pm
by henryford2
I drew these almost 30 years, so they are beginning to face. The images are still visible but difficult to photograph. I do not have the electronic files for these drawings. There are (6) 18" x 24" drawings, including the CM 31 Feedscrew, CM30 Spindle nut, CM 25 Clutch handle (machined) CM 35 Clutch handle casting, CM 26 Yoke and lastly a CM 30 casting. I have two sets. Price is $45 shipped each. Email me below if you have any questions. Thanks
IMG_1456.JPG
IMG_1453.JPG
IMG_1454.JPG
IMG_1458.JPG
IMG_1459.JPG

Re: KR Wilson Combination Machine Clutch Drive Screw Drawings

Posted: Mon Oct 21, 2019 4:04 pm
by henryford2
More
IMG_1462.JPG
IMG_1463.JPG
ANDULICS.jpg

Re: KR Wilson Combination Machine Clutch Drive Screw Drawings

Posted: Thu Oct 24, 2019 11:22 am
by henryford2
Still available, you'll kick yourself when you can't find an original part and need a replacement made!

Re: KR Wilson Combination Machine Clutch Drive Screw Drawings

Posted: Thu Oct 24, 2019 2:16 pm
by henryford2
sold, thanks MTFCA