Last guy tied to peel off the stromberg logo disc off of the cover (?) and really bunged it up. If anyone has a bad OF carcass that is good only for parts, I would like to purchase the cover off of it. Or maybe the whole carcass for parts. What have you?
thanks
WTB - Stromberg OF float cover
-
Scott_Conger
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
WTB - Stromberg OF float cover
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
StanHowe
- Posts: 979
- Joined: Mon Jan 07, 2019 5:42 pm
- First Name: Stan
- Last Name: Howe
- * REQUIRED* Type and Year of Model Ts owned: 2
- Location: Helena, MT
- MTFCA Number: 19133
- Board Member Since: 1999
Re: WTB - Stromberg OF float cover
All the Stromberg float covers are the same except that some say Studebaker -- and a very few say Franklin - so any will fit your OF.
-
Scott_Conger
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB - Stromberg OF float cover
Thank you for the advice, Stan. I suspected that from some of the parts lists PN I had seen, but this is very nice to know for sure...I appreciate that. Certainly broadens the search area!
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured