MTFCA Forum

I have a few older reproductions of the 1917-18 data (patent) plate made on aluminum (reresembles the original zine). The current reproductions are on brass which is not correct for 1917-18. I aquired these 60 years ago and just came across these along with some for other years. If you can use one or want one for show, I will send you one postpaid for $10.

Darel Leipold
239 WaterSt.
Excelsior ( the state is Minnesota)
five, five, three, three, one.

Darel-
Do you have any 1915 data plates? If so, are they a better representation than the current reproductions?
-Keith

Darel
I will take one

I might have some Keith from when we bought out Vintage Antique Reproductions from Rudy S. - they'd be 20 + years ago repro, I believe.

I do have a few 1915 plates. I will pst a picture of one.l

I would like one of the Pat. plates. Mike mikes48ford@q.com Thanks 208 529 5820

I have a 1918 touring and would like a plate please.
strickstuff@yahoo.com

I have a 1918 original touring car that I'm restoring and would like one as well. thanks

I listed my address. Check or cash okay. I have enough to cover these requests plus a some more.

I'd like one also for my 1917 touring restoration project. I'll have a check on the way to you today. Thanks.

Am I correct that these appeared on later 1917's? I think my September 1916 '17 used the same data plate as the 15-16.

I found a few brass ones. $10 each post paid. These date from the 1955 or so. The smaller one is thought to be for the 1913-16 era and the larger one is for some 1912 and perhaps 1911. address is listed above. I also have a few NRS and 1909=11 brass plates. same price.

Do you still have one for 1914? If so, i will thake one.

Craig

Yes, the plate is correct for a 1914. Brass, thank you.

I can supply the present requests.

Yes, the plate is correct for a 1914. Brass, thank you.

I will put a check into the mail tomorrow for a 1914 data plate.

Craig

Do you still have a 12 data plate? Sent a pm. Frank

Yes, lhave several of the 12 plates

When I mail the check to you for the 1914 plate, I will include enough to cover for a 1915 plate as well.

Craig

Randall Anderson has the correct number stamps for the brass plates. All you need to do is supply him with the number. I don't know what he charges though.

I want 3 small plates for 1913 Will send payment

Richard Williamson

I have not found the NRS or 1909-10 plates. Will post when I do. Iknow there will be enough, but are limited. I also have a few 490 Chev plates, but have not located them.

Thank you for your interest. If I find the other box of items I will post what I have.

If additional plates are available , I will send a check for 2 (13 & 15).
Thanks Steve

All listed plates are still available. The 13 and 15 plate I have are the same plate. This plate was used for the time period indicated based upon those original plates on original Ts.

Would like to buy A ‘15 plate.
Bob Giles

Darel-
I'd like a 1915 plate and a 1912 plate.
I'll send an e-mail
-Keith

I have not received any of the emails that were sent as posted in this series.

My email is my last name lower case @ my last name lower case with a s added .org

I found the emails, they were going to "trash" file. Does anyone ened one or more pof the plates?

Darel

Darel. Have mailed check to you for one of the '17-'18 data for my '18 Coupelet.
George

Do you have any 1914 left and 1916 robertaweitzel@gmail.com

Darel, plates came yesterday, Thank you, Craig

Still have the [;ates available as well as the two Moitor Meter plates.