Like the subject line says, Cast Iron Drums to use with Rocky Mountain Brakes.
My understanding is that a run of these had been made at some point in the past with the small parking brake drum integrally cast making the 12" outer drum and in smaller inner drum 1 piece.
A pair was recently sold here but I missed out on them.
If someone has a pair I would be interested.
Thanks,
Bob
WTB: Cast Iron Rocky Mountain Drums
-
Scott_Conger
- Posts: 2806
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB: Cast Iron Rocky Mountain Drums
This is what Bob's asking for:
Scott Conger
Full Flow Float Valves - deliver fuel like Henry intended!
Full Flow Float Valves - deliver fuel like Henry intended!
-
Joe Bell
- Posts: 560
- Joined: Thu Feb 21, 2019 1:20 pm
- First Name: Joe
- Last Name: Bell
- Location: Tiffin Ohio
- MTFCI Number: 24066
Re: WTB: Cast Iron Rocky Mountain Drums
Those look really familiar?? Thanks
-
Scott_Conger
- Posts: 2806
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB: Cast Iron Rocky Mountain Drums
Yes, Joe, they should!
I'm tickled to have them and will building a pair of rear wheels soon to put them on. Many thanks!
I'm tickled to have them and will building a pair of rear wheels soon to put them on. Many thanks!
Scott Conger
Full Flow Float Valves - deliver fuel like Henry intended!
Full Flow Float Valves - deliver fuel like Henry intended!
-
mdsBob
Topic author - Posts: 31
- Joined: Sun Jan 06, 2019 1:56 pm
- First Name: Bob
- Last Name: Hargraves
- Location: Roland AR
- MTFCA Number: 471
- MTFCA Life Member: YES
Re: WTB: Cast Iron Rocky Mountain Drums
Still Looking
-
Original Smith
- Posts: 1872
- Joined: Tue Jan 08, 2019 10:43 am
- First Name: Larry
- Last Name: Smith
- Location: Lomita, California
- MTFCA Number: 121
- MTFCA Life Member: YES
- MTFCI Number: 16310
Re: WTB: Cast Iron Rocky Mountain Drums
Maybe some of you don't know this? Real Rocky Mountain brake drums are one size. The current reproduction is a different size. The cast iron drums I have seen are the original size, and to my knowledge are not currently available.
-
mdsBob
Topic author - Posts: 31
- Joined: Sun Jan 06, 2019 1:56 pm
- First Name: Bob
- Last Name: Hargraves
- Location: Roland AR
- MTFCA Number: 471
- MTFCA Life Member: YES
Re: WTB: Cast Iron Rocky Mountain Drums
Just in case someone that might have them hasn't seen this.
-
Henry K. Lee
- Posts: 3644
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- Location: South Pittsburg, TN
- MTFCA Number: 479
- MTFCA Life Member: YES
Re: WTB: Cast Iron Rocky Mountain Drums
I have only a set of large drum cast iron ones, not small drums.
-
mdsBob
Topic author - Posts: 31
- Joined: Sun Jan 06, 2019 1:56 pm
- First Name: Bob
- Last Name: Hargraves
- Location: Roland AR
- MTFCA Number: 471
- MTFCA Life Member: YES
Re: WTB: Cast Iron Rocky Mountain Drums
Hi Hank,
Sending you an e-mail.
Sending you an e-mail.
-
mdsBob
Topic author - Posts: 31
- Joined: Sun Jan 06, 2019 1:56 pm
- First Name: Bob
- Last Name: Hargraves
- Location: Roland AR
- MTFCA Number: 471
- MTFCA Life Member: YES
Re: WTB: Cast Iron Rocky Mountain Drums
Hank I sent you an e-mail, curious if it came through ok.Henry K. Lee wrote: ↑Thu Jun 11, 2020 3:39 pmI have only a set of large drum cast iron ones, not small drums.
Bob
-
Henry K. Lee
- Posts: 3644
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- Location: South Pittsburg, TN
- MTFCA Number: 479
- MTFCA Life Member: YES
Re: WTB: Cast Iron Rocky Mountain Drums
No I have not received. I am getting emails but sometimes 4 to 5 days later. ?
Hank
Hank
-
mdsBob
Topic author - Posts: 31
- Joined: Sun Jan 06, 2019 1:56 pm
- First Name: Bob
- Last Name: Hargraves
- Location: Roland AR
- MTFCA Number: 471
- MTFCA Life Member: YES
Re: WTB: Cast Iron Rocky Mountain Drums
Hank,
Just tried again. Double checked your e-mail address and pretty sure I got it right.
Let me know if it doesn't come through.
Thanks,
Bob
Just tried again. Double checked your e-mail address and pretty sure I got it right.
Let me know if it doesn't come through.
Thanks,
Bob