Where are you at Chickasha and what are you bringing?

Post parts wanted or for sale here

Topic author
ModelT46
Posts: 544
Joined: Sun Jan 06, 2019 8:35 pm
First Name: Darel
Last Name: Leipold
Location: Excelsior MN
MTFCA Number: 823
MTFCI Number: 953
Board Member Since: 1999

Where are you at Chickasha and what are you bringing?

Post by ModelT46 » Tue Feb 26, 2019 6:12 pm

I (along with my wife) will be at FL7 and 8. We will be in the parking lot on Thursday. We will bring a variety of literarure including non Ford owner's manuals. There will be Model T sales or owner's manuals. Also a few Ford Times, I have yet to select them from my duplicates. I do not have a list, you will have to come and take a look. We will have several wood coil boxes(used on big cars) and perhaps severel T metal boxes,some early steering columns, a pair or two B&B headlites for non Fords, and a several Ford B&B side lites. I will have a pair ot two or singles all brass side lights non Ford. I will see if I have a brass horn or two. There is two feet of snow here and that slows down my search of a storage area or two. I will see if I can find a few carburators. I will post again next week. What am I looking for? A model 60 JB tail light or just the top. Most of my old parts and items are as found. You can do any restoration needed, so the price may be reasonable (you be the judge of that.)

Darel & LaVerna


Gene_French
Posts: 301
Joined: Tue Jan 08, 2019 9:58 am
First Name: Gene
Last Name: French
Location: Nunn, CO
Board Member Since: 2014

Re: Where are you at Chickasha and what are you bringing?

Post by Gene_French » Tue Feb 26, 2019 11:17 pm

Darel:
SL4+5 with my Babbitt bearing tools and linebore units ...always an optimist...Gene French


Nikko012
Posts: 37
Joined: Tue Feb 05, 2019 11:23 am
First Name: Raymond
Last Name: Emling
Location: Kingston, Washington
Board Member Since: 2015

Re: Where are you at Chickasha and what are you bringing?

Post by Nikko012 » Wed Feb 27, 2019 10:46 am

Hi Darrel.
I am looking for a 1911 streeing column for touring. If you have such a item , in your early steering columns. I am very interested. I will not make it to Chickasha. If you can send a picture or two, that would be great also!
Thanks Ray
360 271 7780


Lgitts
Posts: 32
Joined: Sun Jan 06, 2019 5:03 pm
First Name: Les
Last Name: Gitts
Location: Ferndale, Washington

Re: Where are you at Chickasha and what are you bringing?

Post by Lgitts » Wed Feb 27, 2019 3:38 pm

Ray, I sent you an e-mail about a steering column

User avatar

dobro1956
Posts: 554
Joined: Sun Jan 06, 2019 10:13 pm
First Name: Donnie
Last Name: Brown
Location: Hills of Arkansas

Re: Where are you at Chickasha and what are you bringing?

Post by dobro1956 » Wed Feb 27, 2019 4:10 pm

We are at, SL 11- 12- 13 in the south building. We are bringing our air mattress's, electric blankets, microwave, full winter blizzard clothing, and plenty of food. Oh you may have meant what parts are we bringing. :) We will have a variety of model t and model a small parts and some other junk.... See ya'll there ............ (I am from Arkansas, so it is correct for me to say ya'll)

User avatar

shammatt
Posts: 23
Joined: Mon Jan 07, 2019 9:16 am
First Name: Steve
Last Name: Hammatt
Location: Mount Vernon WA
Contact:

Re: Where are you at Chickasha and what are you bringing?

Post by shammatt » Wed Feb 27, 2019 5:07 pm

Leather License Plates!
That's what I'm bringing and we'll be in our normal space, North Bldg Spaces NJ 8-9. That's just past the lobby (where the Ersland's have their desk) then turn right to enter the showroom, turn left and we're there on your left. Stop by and say hello! Remember, we're just steps away from the Men's Restroom, the food vendors and lot's of indoor vendors, both in the East side (where we are) and the West side of the North Bldg. Also, it's air conditioned and has free WiFi. So, if your cell phone or laptop needs a boost, come in and use the free WiFi. Additionally, there will probably again be a ATM machine nearby.
[b]Steve Hammatt
Mount Vernon WA USA
www.leatherplates.com
www.brassbuicks.org[/b]

User avatar

BRENT in 10-uh-C
Posts: 24
Joined: Mon Jan 07, 2019 11:21 am
First Name: Brent
Last Name: Terry
Location: Eastern Tennessee
MTFCA Number: 32295
Board Member Since: 1999
Contact:

Re: Where are you at Chickasha and what are you bringing?

Post by BRENT in 10-uh-C » Mon Mar 04, 2019 1:53 pm

Is anyone on here bringing any 'modern Ford' (--1928-31 Model-A) parts to Chickasha to sell? I am in the market for a few Model-A flywheels, a few distributors, a good front axle or front radius rod (wishbone) and a few other core parts. Send me a PM if you have some of this to sell.

User avatar

TonyB
Posts: 426
Joined: Fri Jan 04, 2019 11:15 am
First Name: Tony
Last Name: Bowker
Location: Ramona, CA
MTFCA Number: 32
MTFCA Life Member: YES
Board Member Since: 2005

Re: Where are you at Chickasha and what are you bringing?

Post by TonyB » Tue Mar 05, 2019 12:12 am

I’ll be in the North building at NJ5 with my usual selection of bits.
I did have a brass radiator with a new core but that got sold. I will have a selection of rims both 21” and 30”. Also a rusty Chevy cylinder head complete with valve train at a must move price. Also a few 30x3 1/2 tires that still have tread but have been discarded by owners who want news rubber. I have several starter bendix that are in good condition.
I’ll be looking for a good starter hogs head and a good three dip pan.
Let’s hope the weather cooperates 😊😊
Tony Bowker
Ramona, California
1909 Touring, 1914 Touring, 1915 Speedster, 1924 Coupe.

User avatar

HornsRus
Posts: 424
Joined: Sun Jan 06, 2019 1:07 pm
First Name: Charley
Last Name: Shaver
Location: MO

Re: Where are you at Chickasha and what are you bringing?

Post by HornsRus » Tue Mar 05, 2019 11:15 am

all i can bring is CASH!!!!!!!!!! charley


csnailnrun
Posts: 123
Joined: Sat Jan 19, 2019 9:05 am
First Name: Ryan
Last Name: Snellen
Location: Nashville
Board Member Since: 2017

Re: Where are you at Chickasha and what are you bringing?

Post by csnailnrun » Tue Mar 05, 2019 11:50 am

Tony, I sent you an e-mail.
Gene, I'll be purchasing up one of your timer plate adjustment tools.
Brent, are you in need of an A crank?

Post Reply Previous topicNext topic