Motel t crank 26/27
-
Psainslie
Topic author - Posts: 17
- Joined: Sun Jan 27, 2019 8:13 pm
- First Name: Patrick
- Last Name: Ainslie
- Location: Bloomfield Hills, MI
Motel t crank 26/27
WTB good used 26/27 crank that is not more 10 thousand under and has been magnifluxed and would be satisfactory for use in an engine overhaul. Pat
-
Adam
- Posts: 775
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: Adam
- Last Name: Doleshal
- Location: Wisconsin
- MTFCA Number: 23809
- MTFCI Number: 1
- Board Member Since: 2000
Re: Motel t crank 26/27
FYI. A ‘26/‘27 crank with .003/.004 wear might clean up at -.010”. If it has .008 or more wear, it is likely to go -.020”. Most all of the ‘26/‘27’s wear off center on the rear main and grind more than double the wear measurement. Just something to be aware of in your search.
-
Psainslie
Topic author - Posts: 17
- Joined: Sun Jan 27, 2019 8:13 pm
- First Name: Patrick
- Last Name: Ainslie
- Location: Bloomfield Hills, MI
Re: Motel t crank 26/27
That is one of the reasons to start with a crank that isn’t already .020 or more to start with Thanks