Question, what is the clearance of the transmission shaft to brake drum bushings?
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 50
- Joined: Fri Aug 30, 2019 7:56 pm
- First Name: lorenzo
- Last Name: leon
- * REQUIRED* Type and Year of Model Ts owned: 2 doctors coupe
- Location: hialeah fla
Question, what is the clearance of the transmission shaft to brake drum bushings?
Question, what is the clearance the transmission shaft to brake drum bushings?
-
- Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: what is the clearance the transmission shaft to brake drum bushings?
You would be fine with .004.
As important or even more important is the TIR of the output shaft after bolting onto the brake drum. You can have proper clearance on bushings, but if those bushings are not dead nuts, you will have more runout than the 4th main can handle.
As important or even more important is the TIR of the output shaft after bolting onto the brake drum. You can have proper clearance on bushings, but if those bushings are not dead nuts, you will have more runout than the 4th main can handle.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author - Posts: 50
- Joined: Fri Aug 30, 2019 7:56 pm
- First Name: lorenzo
- Last Name: leon
- * REQUIRED* Type and Year of Model Ts owned: 2 doctors coupe
- Location: hialeah fla
Re: what is the clearance the transmission shaft to brake drum bushings?
Thank u Scott - What is the term[dead nuts ?] and [TIR ]T= total ? I? R =run out? sorry I'm not familiar thank you Lorenzo
-
- Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: what is the clearance the transmission shaft to brake drum bushings?
Total Indicated Runout
The maximum excursion from a "0" point
The maximum excursion from a "0" point
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 3298
- Joined: Tue Jan 08, 2019 10:43 am
- First Name: Larry
- Last Name: Smith
- * REQUIRED* Type and Year of Model Ts owned: 13 Touring, 13 Roadster, 17 Coupelet, 25 Roadster P/U
- Location: Lomita, California
- MTFCA Number: 121
- MTFCA Life Member: YES
- MTFCI Number: 16310
Re: Question, what is the clearance of the transmission shaft to brake drum bushings?
I believe that information is in the service book.