Plastic vs. Wood Coils

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
TBill
Posts: 73
Joined: Mon Jan 07, 2019 12:31 pm
First Name: Bill
Last Name: Obier
* REQUIRED* Type and Year of Model Ts owned: 1926 Fordor, 1926 TT, 1913 Speedster (WIP)
Location: Rosedale, LA
MTFCA Number: 28973

Plastic vs. Wood Coils

Post by TBill » Fri Feb 07, 2020 7:58 am

I have seen some discussion on this topic but no real conclusions.

Plastic seems to have some advantage over wood in that is won’t swell and should slide in and out of coil boxes easier.

Internals should be identical to wood ...

Please advise and comment.

THANKS


tdump
Posts: 1275
Joined: Sun Jan 06, 2019 7:00 pm
First Name: Mack
Last Name: Cole
* REQUIRED* Type and Year of Model Ts owned: TT. T express pickup,speedster project.
Location: North Carolina
MTFCA Number: 28146

Re: Plastic vs. Wood Coils

Post by tdump » Fri Feb 07, 2020 8:10 am

I get a call sometimes to work on a 24 roadster and the last time I went over there the fellow had pulled 4 plastic colls and installed 4 that Ron Patterson had rebuilt.Runs better. It is my understanding the plastic coils are cheaper made and better suited for 1 cylinder hit and miss engine instead of a T .
If you can't help em, don't hinder em'


Scott_Conger
Posts: 6431
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Plastic vs. Wood Coils

Post by Scott_Conger » Fri Feb 07, 2020 10:13 am

The benefit is that they won't swell.

And the benefits end there.
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


Original Smith
Posts: 3284
Joined: Tue Jan 08, 2019 10:43 am
First Name: Larry
Last Name: Smith
* REQUIRED* Type and Year of Model Ts owned: 13 Touring, 13 Roadster, 17 Coupelet, 25 Roadster P/U
Location: Lomita, California
MTFCA Number: 121
MTFCA Life Member: YES
MTFCI Number: 16310

Re: Plastic vs. Wood Coils

Post by Original Smith » Fri Feb 07, 2020 10:30 am

Some of the last wood KW coils weren't much better. They really cheapened them, and the condenser I understand wasn't much good either.

User avatar

RustyFords
Posts: 1554
Joined: Sun Jan 06, 2019 11:16 am
First Name: Don
Last Name: Allen
* REQUIRED* Type and Year of Model Ts owned: 1924 Touring
Location: Houston, TX
MTFCA Number: 50001

Re: Plastic vs. Wood Coils

Post by RustyFords » Fri Feb 07, 2020 11:03 am

You'd think, after all these years, that there would be a modern coil package that would fit in the stock coil box that eliminates all the shortcomings of the wooden and plastic coils...something that would do what a coil is supposed to do but with modern, durable components and be invisible once the coil box lid was shut.

Sort of the ignition equivalent of the Fun Projects pinion bearing. I know you can install a distributor, etc but that's a dramatically visible alteration.

I mean heck...a coil is just a miniature transformer. We're not talking rocket science.

Maybe there has been and I'm just not aware of it. I've only been into T's for a few years and I'm the first to admit that I'm ignorant on the topic.
1924 Touring

User avatar

Mark Gregush
Posts: 4956
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
MTFCA Number: 52564
Board Member Since: 1999

Re: Plastic vs. Wood Coils

Post by Mark Gregush » Fri Feb 07, 2020 12:00 pm

There has been, an example was the Tru-fire. (google it: Tru-Fire ford Model T)
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup

User avatar

RustyFords
Posts: 1554
Joined: Sun Jan 06, 2019 11:16 am
First Name: Don
Last Name: Allen
* REQUIRED* Type and Year of Model Ts owned: 1924 Touring
Location: Houston, TX
MTFCA Number: 50001

Re: Plastic vs. Wood Coils

Post by RustyFords » Fri Feb 07, 2020 12:19 pm

Mark Gregush wrote:
Fri Feb 07, 2020 12:00 pm
There has been, an example was the Tru-fire. (google it: Tru-Fire ford Model T)
I've heard that name before....didn't know that that's what it was. It looks like you couldn't run a mag with that setup.
1924 Touring


Scott_Conger
Posts: 6431
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Plastic vs. Wood Coils

Post by Scott_Conger » Fri Feb 07, 2020 2:35 pm

you can buy original wood coils, you can buy rebuilt original wood coils, you can buy new wood coils (both quality and crummy, you decide), you can buy every component in and on a wood coil. Unless termites remove their covering, they are pertetually repairable and adjustable. I see no shortcoming with that.

When a plastic coil quits, that's pretty much that.
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


Kerry
Posts: 1297
Joined: Mon Jan 07, 2019 2:42 pm
First Name: Frank
Last Name: van Ekeren
* REQUIRED* Type and Year of Model Ts owned: 1916 touring, 1916 pick-up, 1924 coupe, 1926 touring, 1927 touring
Location: Rosedale Vic Australia

Re: Plastic vs. Wood Coils

Post by Kerry » Fri Feb 07, 2020 3:27 pm

Scott.
A plastic set in one of my T,s had been rebuilt with new condensers although I didn't do them myself, they have been in the car with no faults for many years and clocked up many long tour miles.


SurfCityGene
Posts: 600
Joined: Wed Jan 23, 2019 3:00 pm
First Name: Gene
Last Name: Carrothers
* REQUIRED* Type and Year of Model Ts owned: 1912 Torpedo Roadster
Location: Huntington Beach, Ca
MTFCA Number: 22905
MTFCI Number: 23068
Board Member Since: 1999

Re: Plastic vs. Wood Coils

Post by SurfCityGene » Fri Feb 07, 2020 3:51 pm

Rusty, The answer to your question is an ETimer!

If you haven't heard of or researched Mike Kossor's ETimer then many of us here believe you'll be very pleasantly surprised. I think it is exactly what you are looking for? You can keep your old coil boxes so they sounds like operating coils but will have the improved performance of an ignition system that operates without any maintenance and at a level not achieved by other ignition systems over years of driving! It looks exactly like stock, can be quickly returned back to stock and offers unmatched performance of your T for years!

The installation of a disy on a stock looking Model T with the availability of the Etimer certainly is a terrible distraction visually.

Please check it out or start another thread asking for others opinions.
1912 Torpedo Roadster


J1MGOLDEN
Posts: 945
Joined: Sun Jan 06, 2019 5:39 pm
First Name: James
Last Name: Golden
* REQUIRED* Type and Year of Model Ts owned: 1926 Model T Roadster
Location: Bowie, MD
MTFCA Number: 14294
MTFCI Number: 13562

Re: Plastic vs. Wood Coils

Post by J1MGOLDEN » Fri Feb 07, 2020 6:13 pm

Gene, those E-timers need 4 good coils to operate.

All they do is act as a switch to turn on the coil.

That part is precision, but that is where the great production ends.


Moxie26
Posts: 1315
Joined: Sun Jan 06, 2019 8:20 pm
First Name: Robert
Last Name: Jablonski
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: New Jersey
MTFCA Number: 407
MTFCA Life Member: YES
Board Member Since: 1999

Re: Plastic vs. Wood Coils

Post by Moxie26 » Fri Feb 07, 2020 6:20 pm

Jim as long as those coils have good secondary windings they condition of the condenser/capacitor is not important. I've been running an e-timer with no top hardware for the last 5 years and have had no problems with ignition...... Just to prove the point that the e-timer does not rely or need coil point settings of any type, just need coils with good primary and secondary windings.


Moxie26
Posts: 1315
Joined: Sun Jan 06, 2019 8:20 pm
First Name: Robert
Last Name: Jablonski
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: New Jersey
MTFCA Number: 407
MTFCA Life Member: YES
Board Member Since: 1999

Re: Plastic vs. Wood Coils

Post by Moxie26 » Fri Feb 07, 2020 6:24 pm

Jim and all; I do rebuild the ignition coils and have found that the standoffs on the plastic oils will change position with temperature thus changing the electrical settings that were set and calibrating that coil...... Just like with air temperature affecting air pressure and tires, temperature with plastic oils will change the electrical settings.


Moxie26
Posts: 1315
Joined: Sun Jan 06, 2019 8:20 pm
First Name: Robert
Last Name: Jablonski
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: New Jersey
MTFCA Number: 407
MTFCA Life Member: YES
Board Member Since: 1999

Re: Plastic vs. Wood Coils

Post by Moxie26 » Fri Feb 07, 2020 6:26 pm

I'll check voice texting results in the future, coils are not oils.....lol


jiminbartow
Posts: 2202
Joined: Sun Jan 06, 2019 10:55 pm
First Name: James
Last Name: Patrick
* REQUIRED* Type and Year of Model Ts owned: 1926 Coupe
Location: Bartow, FL
MTFCA Number: 50126
Board Member Since: 2001

Re: Plastic vs. Wood Coils

Post by jiminbartow » Fri Feb 07, 2020 6:45 pm

I prefer the old wooden coils with Ford Script rebuilt by The Coilman. I’ve never had a problem with them and they look better and more original when showing the car off. Jim Patrick


Topic author
TBill
Posts: 73
Joined: Mon Jan 07, 2019 12:31 pm
First Name: Bill
Last Name: Obier
* REQUIRED* Type and Year of Model Ts owned: 1926 Fordor, 1926 TT, 1913 Speedster (WIP)
Location: Rosedale, LA
MTFCA Number: 28973

Re: Plastic vs. Wood Coils

Post by TBill » Fri Feb 07, 2020 6:53 pm

Looks like wood is the way to go.

Thanks all!!!


J Sundstrom
Posts: 61
Joined: Mon Jan 07, 2019 2:48 pm
First Name: John
Last Name: Sundstrom
* REQUIRED* Type and Year of Model Ts owned: 1920 Touring
Location: Vulcan, MI

Re: Plastic vs. Wood Coils

Post by J Sundstrom » Fri Feb 07, 2020 7:05 pm

Those plastic coils were manufactured by Blackstone Mfg in Chicago. It was a leftover product line that Echlin Corp
Continued to produce after they acquired the company in the
early 80’s. They were made until the late 90’s by them and
then liquidated or sold off when the plant was shut down
and Echlin was acquired by Dana Corp. I know this because I worked there then but was involved with mechanical and electrical fuel pumps. Quality can’t say but I know the housing
was not as stable as the original wood coil.


jiminbartow
Posts: 2202
Joined: Sun Jan 06, 2019 10:55 pm
First Name: James
Last Name: Patrick
* REQUIRED* Type and Year of Model Ts owned: 1926 Coupe
Location: Bartow, FL
MTFCA Number: 50126
Board Member Since: 2001

Re: Plastic vs. Wood Coils

Post by jiminbartow » Fri Feb 07, 2020 7:27 pm

In the teens and 1920’s Ford Motor Company did a lot of experimentation with components made from soy beans. I’m not sure if it can be referred to as a plastic or it was referred to as soybean composites, but I once had a spark coil made from pressed soy bean composites. It was like a hard plastic, resembling Bakelite, with the Ford script pressed into the lined design of the box. I sold it on eBay and it was purchased by a well known MTFCA Member who has a large collection of Model T spark coils of every type. Jim Patrick


Allan
Posts: 5205
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Plastic vs. Wood Coils

Post by Allan » Fri Feb 07, 2020 7:42 pm

Jim, it is the I timer which requires working coils, and these buzz as do the originals. The I timer came after the E timer, to cater for those who had to hear the sounds of buzzing coils. I love my E timer on my roadster. I have a True fire in my 1912 van and it performs flawlessly. My shooting brake has a set of Ron Paterson rebuilt coils and an Anderson timer. Henrietta has coils I rebuilt and an Anderson timer. My 27 Tudor has a distributor, which will get the A... when it gives me any trouble. Like anything, your mileage will vary according to the attention you give it.

Allan from down under.


Rollinford
Posts: 12
Joined: Mon Jan 07, 2019 5:13 am
First Name: Dick
Last Name: Pakeman
* REQUIRED* Type and Year of Model Ts owned: 1926 Touring 1926 - 1923 TT Motorhome - 1926 T Coupe
Location: Helidon

Re: Plastic vs. Wood Coils

Post by Rollinford » Fri Feb 07, 2020 10:47 pm

I have been experimenting with Model T ignition systems, and am currently trialling coil boxes of my own making.
I have used Australian Silky Oak for the timber boxes.
I have used modern components except for the capacitor on the internals. The ignition coil is from an Australian Ford Falcon BA series. The letters and numbers for it are VDO A2C59513771 3618M.
The coil capacitor letters and numbers are SH-CAP 10uF 400V 50/60Hz
The points capacitor is one supplied by Snyders.
The magnetic post is one I have wound myself.
So far I have probably driven approx. 150 miles. I am doing a longer run with the vehicle at the end of the month and so that should give me a fairer indication of its reliability. So far they have been trouble free, on both battery and magneto ignition.
The timer shown in the picture is one I made a few years ago, as a copy of an original Teisch timer.
Attachments
Coil.jpg
Coil.jpg (39.46 KiB) Viewed 8269 times


Luke
Posts: 585
Joined: Fri Dec 13, 2019 1:04 am
First Name: Luke
Last Name: P
* REQUIRED* Type and Year of Model Ts owned: 1926
Location: New Zealand

Re: Plastic vs. Wood Coils

Post by Luke » Sat Feb 08, 2020 5:28 pm

Good to see that innovation, Dick.

It'll be interesting to hear how your trials go with a few more miles on them, hope you have continued success.

FWIW I have a plastic coil here that I was given recently. I'm think I'm going to use it when I research and design my own electronic timer; it's trivial to produce the necessary output to induce the coils without need for points etc - which to my mind is probably best suited to the plastic coils, given their propensity to change characteristics over time.

User avatar

JWalters
Posts: 113
Joined: Sun Jan 06, 2019 6:34 pm
First Name: Jason
Last Name: Walters
* REQUIRED* Type and Year of Model Ts owned: 1922 Touring
Location: Missouri
Board Member Since: 2000

Re: Plastic vs. Wood Coils

Post by JWalters » Sun Feb 09, 2020 12:26 am

Rollinford wrote:
Fri Feb 07, 2020 10:47 pm
The timer shown in the picture is one I made a few years ago, as a copy of an original Teisch timer.
Dick, Thats an interesting timer. Could you tell us a little more about your setup and how this timer works?








Image
Jason Walters
Image


Rollinford
Posts: 12
Joined: Mon Jan 07, 2019 5:13 am
First Name: Dick
Last Name: Pakeman
* REQUIRED* Type and Year of Model Ts owned: 1926 Touring 1926 - 1923 TT Motorhome - 1926 T Coupe
Location: Helidon

Re: Plastic vs. Wood Coils

Post by Rollinford » Sun Feb 09, 2020 3:48 am

Hello Jason
Thanks for your interest. I do not know how to post a link to the original 2015 posting about the timer, but if you enter the following into your search engine it will come up.
Tisch timer mtfca
Regards Dick

User avatar

JWalters
Posts: 113
Joined: Sun Jan 06, 2019 6:34 pm
First Name: Jason
Last Name: Walters
* REQUIRED* Type and Year of Model Ts owned: 1922 Touring
Location: Missouri
Board Member Since: 2000

Re: Plastic vs. Wood Coils

Post by JWalters » Sun Feb 09, 2020 5:11 am

Thanks Dick, That looks like a good design for a timer. Great work on making your own!


Image




Image
Jason Walters
Image


Allan
Posts: 5205
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Plastic vs. Wood Coils

Post by Allan » Tue Feb 11, 2020 12:42 am

Dick, Silky oak was also used by Lorimer when making replacement coils for T's. They do look pretty, But I have never had a matched set of 4 to compare their performance against originals.
I have never gotten over seeing silky oak being sawn into 4 x 1.5" ceiling timbers at a mill north of Townsville when I was in the army in 1970. What a waste! We'd been sent to the mill for offcuts to fuel a field cooker on an exercise near Ingham.

Allan from down under.


Rollinford
Posts: 12
Joined: Mon Jan 07, 2019 5:13 am
First Name: Dick
Last Name: Pakeman
* REQUIRED* Type and Year of Model Ts owned: 1926 Touring 1926 - 1923 TT Motorhome - 1926 T Coupe
Location: Helidon

Re: Plastic vs. Wood Coils

Post by Rollinford » Sun Aug 30, 2020 4:33 am

UPDATE
On 7 February I posted information and image of coils I built with modern components, and I indicated then that I would report back once they had been tested.
This month we completed a 1700 mile trip (2750 km) in 10 days and I happily report that they never missed a beat. They will continue to be used, and our two other T's now run the same coils.


Dan Hatch
Posts: 4111
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: Plastic vs. Wood Coils

Post by Dan Hatch » Sun Aug 30, 2020 10:10 am

What about this plastic coil?
19064D0D-4A94-48D3-8A55-66215ACE0894.jpeg
316550EA-7682-4588-8FF9-64715B908444.jpeg

User avatar

BE_ZERO_BE
Posts: 541
Joined: Sun Jan 06, 2019 12:27 pm
First Name: BOB
Last Name: CASCISA
* REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
Location: POULSBO, WA
MTFCA Number: 16897
MTFCI Number: 16628

Re: Plastic vs. Wood Coils

Post by BE_ZERO_BE » Sun Aug 30, 2020 12:59 pm

Dan Wins :)
Respectfully Submitted,
Be_Zero_Be

I drive a Model T ... Microseconds don't matter :D

For every Absolute Model T Fact there are at least three exceptions.


Dan Hatch
Posts: 4111
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: Plastic vs. Wood Coils

Post by Dan Hatch » Sun Aug 30, 2020 1:39 pm

Any one know story of this coil? I have had it a long time. Do not know the history. School science? Looks too well done to be a homemade. Thanks Dan


jab35
Posts: 892
Joined: Sun Jan 06, 2019 12:28 pm
First Name: James
Last Name: Bartsch
* REQUIRED* Type and Year of Model Ts owned: '26 Coupe
Location: Dryden, NY 13053
MTFCA Number: 30615
MTFCA Life Member: YES

Re: Plastic vs. Wood Coils

Post by jab35 » Sun Aug 30, 2020 11:38 pm

Looks like an acrylic casting with original coil components, acrylic castings were very popular 'artwork' in the 1970, not that this one would not function. The cracking visible is common in 'old' acrylic pieces. IMHO, Acrylic would be a poor choice for coils in improved cars exposed to higher operating temperatures than dash mounted coilboxes, maybe a poor choice in any case, but a great visual.


Dan Hatch
Posts: 4111
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: Plastic vs. Wood Coils

Post by Dan Hatch » Mon Aug 31, 2020 6:54 am

Coil has box made out of clear plastic filled with resin of some kind. Also has modern cap in it too.
I have not tried it to see if it works in all the years I have had it. Someone went to a lot of trouble if this was a one of. Dan

Post Reply Previous topicNext topic