Taking out and re-installing Hassler front shocks on my '13

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
User avatar

Topic author
Darren J Wallace
Posts: 343
Joined: Sun Jan 06, 2019 11:43 am
First Name: Darren
Last Name: Wallace
* REQUIRED* Type and Year of Model Ts owned: 1913 Canadian Touring 1905 Queen model B
Location: Woodstock, Ontario, Canada
Board Member Since: 2005
Contact:

Taking out and re-installing Hassler front shocks on my '13

Post by Darren J Wallace » Tue Feb 05, 2019 6:11 pm

I'm in the process of removing my front axle assembly to install a correct 1913 tapered front spring and also to repair a nasty spring perch that had damage and was welded partially to the axle.
What I need help with before I proceed is this:

I've never dealt with the Hassler shocks. It seems to me looking inside the Hassler spring is that a threaded tool/rod (with a pin drilled and installed cross way in it) might be needed, along with a big washer & nut, to compress the bee hive shaped spring(?) That stuff I can make.

Is there anything I need to know ahead of time to take these apart safely? I'm familiar with the rest of the front axle, and it's issues.

Thanks in advance!
Attachments
IMG_5214.JPG
1913 Canadian Touring & 1905 Queen, both cars are 4 generation family owned cars

User avatar

RajoRacer
Posts: 4308
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: Taking out and re-installing Hassler front shocks on my '13

Post by RajoRacer » Tue Feb 05, 2019 7:32 pm

Here's what a NOS Hassler spring compressor looks like.

Just be REAL careful - I've had success utilizing heavy zip ties once the spring is compressed to capture it - one on each side - leave them on for installation unless you need to paint !
Attachments
Hassler spring compressor.JPG


Mike Lebsack-Iowa
Posts: 458
Joined: Sun Jan 06, 2019 10:22 pm
First Name: Mike
Last Name: Lebsack
* REQUIRED* Type and Year of Model Ts owned: 11Torpedo, 11 Roadster, 13 Touring, 14 Roadster, 14 Touring
Location: Iowa
Board Member Since: 2008

Re: Taking out and re-installing Hassler front shocks on my '13

Post by Mike Lebsack-Iowa » Tue Feb 05, 2019 7:58 pm

Word of warning! Be very careful. I know of a fellow who got both of his front teeth traumatically removed by a Hassler spring. He said it was very abrupt and quite painful.

User avatar

DanTreace
Posts: 3299
Joined: Sun Jan 06, 2019 10:56 am
First Name: Dan
Last Name: Treace
* REQUIRED* Type and Year of Model Ts owned: '23 cutoff, '25 touring, '27 touring
Location: North Central FL
MTFCA Number: 4838
MTFCI Number: 115
Board Member Since: 2000
Contact:

Re: Taking out and re-installing Hassler front shocks on my '13

Post by DanTreace » Tue Feb 05, 2019 8:39 pm

Be sure to refer to the Hassler Instructions, print copy avail from vendors if you haven't already. The key install is the transfer from right to left of the spring perches, needed to have the proper tilt of the axle due to the Hassler brackets. Safety first!
scan0042 (373x475).jpg
scan0042 (373x475).jpg (67.51 KiB) Viewed 5866 times
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford

User avatar

Topic author
Darren J Wallace
Posts: 343
Joined: Sun Jan 06, 2019 11:43 am
First Name: Darren
Last Name: Wallace
* REQUIRED* Type and Year of Model Ts owned: 1913 Canadian Touring 1905 Queen model B
Location: Woodstock, Ontario, Canada
Board Member Since: 2005
Contact:

Re: Taking out and re-installing Hassler front shocks on my '13

Post by Darren J Wallace » Thu Feb 07, 2019 8:26 am

Thanks guys for your input. Everything came apart easily with no issues or problems!
1913 Canadian Touring & 1905 Queen, both cars are 4 generation family owned cars


Original Smith
Posts: 3284
Joined: Tue Jan 08, 2019 10:43 am
First Name: Larry
Last Name: Smith
* REQUIRED* Type and Year of Model Ts owned: 13 Touring, 13 Roadster, 17 Coupelet, 25 Roadster P/U
Location: Lomita, California
MTFCA Number: 121
MTFCA Life Member: YES
MTFCI Number: 16310

Re: Taking out and re-installing Hassler front shocks on my '13

Post by Original Smith » Thu Feb 07, 2019 10:55 am

I'm probably going to be tarred and feathered for saying this, but I see no advantage to Hasslers, especially now that you've found a nice tapered leaf front spring. I would turn the perches around the way they are supposed to be, and put the Hasslers on a shelf!


Kohnke Rebabbitting
Posts: 144
Joined: Sat Jan 26, 2019 3:12 pm
First Name: Herman
Last Name: Kohnke
* REQUIRED* Type and Year of Model Ts owned: 1914 Roadster, 1922 Coupe
Location: Clare, Iowa

Re: Taking out and re-installing Hassler front shocks on my '13

Post by Kohnke Rebabbitting » Thu Feb 07, 2019 3:36 pm

I have always seen a big difference when crossing Railroad Tracks, with just the front ones on. The rear ones to me, I don't see much difference, except that the car leans more on corners. I would have rear brakes, rather then rear Hasslers.

Herm.


Kohnke Rebabbitting
Posts: 144
Joined: Sat Jan 26, 2019 3:12 pm
First Name: Herman
Last Name: Kohnke
* REQUIRED* Type and Year of Model Ts owned: 1914 Roadster, 1922 Coupe
Location: Clare, Iowa

Re: Taking out and re-installing Hassler front shocks on my '13

Post by Kohnke Rebabbitting » Thu Feb 07, 2019 3:36 pm

I have always seen a big difference when crossing Railroad Tracks, with just the front ones on. The rear ones to me, I don't see much difference, except that the car leans more on corners. I would have rear brakes, rather then rear Hasslers.

Herm.

User avatar

Topic author
Darren J Wallace
Posts: 343
Joined: Sun Jan 06, 2019 11:43 am
First Name: Darren
Last Name: Wallace
* REQUIRED* Type and Year of Model Ts owned: 1913 Canadian Touring 1905 Queen model B
Location: Woodstock, Ontario, Canada
Board Member Since: 2005
Contact:

Re: Taking out and re-installing Hassler front shocks on my '13

Post by Darren J Wallace » Thu Feb 07, 2019 6:55 pm

Well, I haven't decided whether the Hasslers are going back on or not. I'm leaning towards a yes, but I'm not 100% certain yet. They've been on the car for most of it's existence. The figure eight shackles are very worn and need to be either built up and turned in the lathe, or I look for a new pair. The Hassler bolts are REALLY worn out.

I did discover why the spring perch was welded to the axle. The threaded shank on the perch was sheared clean off! The only thing holding the shank in in was the rust. What really made me shiver was the fact that a few light taps with the hammer, and the shank came out! So virtually NOTHING was holding the home made wishbone helper in! Something told me to deal with this front axle issue sooner than later. Boy am I glad I did! The welds are "rough" ground off and thankfully the original axle will be easily saved, thanks to crappy welds that didn't stick to it too bad.
Since the perch was toast anyways, I cut it about 1/8" above the axle with my reciprocating saw, and slowly ground the rest away. Made for an easy job. The other spring perch lifted out of the axle with no tools after the nut was removed! Lucky me :lol:

I will be able to do the final visual repairs to where the axle was welded in my milling machine, and it will look like it was never messed with :D

The wishbone radius rod is in really great shape, but all the ball joints are worn in the steering. I guess that is to be expected....

More to come!
Attachments
IMG_5226.JPG
IMG_5218.JPG
Last edited by Darren J Wallace on Thu Feb 07, 2019 7:02 pm, edited 2 times in total.
1913 Canadian Touring & 1905 Queen, both cars are 4 generation family owned cars

User avatar

Topic author
Darren J Wallace
Posts: 343
Joined: Sun Jan 06, 2019 11:43 am
First Name: Darren
Last Name: Wallace
* REQUIRED* Type and Year of Model Ts owned: 1913 Canadian Touring 1905 Queen model B
Location: Woodstock, Ontario, Canada
Board Member Since: 2005
Contact:

Re: Taking out and re-installing Hassler front shocks on my '13

Post by Darren J Wallace » Thu Feb 07, 2019 6:56 pm

More pics
Attachments
IMG_5222.JPG
IMG_5216.JPG
IMG_5223.JPG
IMG_5224.JPG
IMG_5225.JPG
1913 Canadian Touring & 1905 Queen, both cars are 4 generation family owned cars

User avatar

Topic author
Darren J Wallace
Posts: 343
Joined: Sun Jan 06, 2019 11:43 am
First Name: Darren
Last Name: Wallace
* REQUIRED* Type and Year of Model Ts owned: 1913 Canadian Touring 1905 Queen model B
Location: Woodstock, Ontario, Canada
Board Member Since: 2005
Contact:

Re: Taking out and re-installing Hassler front shocks on my '13

Post by Darren J Wallace » Thu Feb 07, 2019 6:57 pm

more pics
Attachments
IMG_5221.JPG
IMG_5215.JPG
1913 Canadian Touring & 1905 Queen, both cars are 4 generation family owned cars

User avatar

RajoRacer
Posts: 4308
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: Taking out and re-installing Hassler front shocks on my '13

Post by RajoRacer » Thu Feb 07, 2019 7:03 pm

Good save on the axle - Lang's carries new Hassler bolts - I used to get mine from Jack Darren R.I.P. !


Allan
Posts: 5201
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Taking out and re-installing Hassler front shocks on my '13

Post by Allan » Sat Feb 09, 2019 6:13 pm

Darren, when finishing off the grinding marks from your weld removal, I have found that a rat tail file is very handy. It will allow you to make/repair the radius around the boss, but equally importantly, it leaves a somewhat rough finish to your work making it look very much like the original. You can use the file to give flat surfaces the same rough appearance.

Hope this helps. Allan from down under.

User avatar

Topic author
Darren J Wallace
Posts: 343
Joined: Sun Jan 06, 2019 11:43 am
First Name: Darren
Last Name: Wallace
* REQUIRED* Type and Year of Model Ts owned: 1913 Canadian Touring 1905 Queen model B
Location: Woodstock, Ontario, Canada
Board Member Since: 2005
Contact:

Re: Taking out and re-installing Hassler front shocks on my '13

Post by Darren J Wallace » Tue Feb 19, 2019 11:50 am

Thanks Allan!
1913 Canadian Touring & 1905 Queen, both cars are 4 generation family owned cars

User avatar

Topic author
Darren J Wallace
Posts: 343
Joined: Sun Jan 06, 2019 11:43 am
First Name: Darren
Last Name: Wallace
* REQUIRED* Type and Year of Model Ts owned: 1913 Canadian Touring 1905 Queen model B
Location: Woodstock, Ontario, Canada
Board Member Since: 2005
Contact:

Re: Taking out and re-installing Hassler front shocks on my '13

Post by Darren J Wallace » Tue Feb 19, 2019 11:52 am

Finally finished making the '13's front axle assembly correct & safe. Replaced welded spring perch, repaired axle where the welds hit it and carefully hid the repair as to only alter the original axle enough to make it right. Replaced front spring to correct tapered leaf spring assembly. Tightened up play in drag link, tie rod, & pitman arm. Repaired worn shackles. New king pins, and new tie rod pins, all new bushings! DONE! I'm glad I got this done sooner than later. The broken spring perch welded in to place could have been a death sentence! Glad I spotted it! It was very unnoticeable under the Hassler shocks.

I decided not to put the accessory Hassler shocks back on the car.

No, it won't win any Concours best of shows, but it's safe, and it still looks just the way Gramps would remember it, and that's all that matters to me :P
Attachments
IMG_5343.JPG
IMG_5345.JPG
IMG_5342.JPG
IMG_5341.JPG
1913 Canadian Touring & 1905 Queen, both cars are 4 generation family owned cars

User avatar

Topic author
Darren J Wallace
Posts: 343
Joined: Sun Jan 06, 2019 11:43 am
First Name: Darren
Last Name: Wallace
* REQUIRED* Type and Year of Model Ts owned: 1913 Canadian Touring 1905 Queen model B
Location: Woodstock, Ontario, Canada
Board Member Since: 2005
Contact:

Re: Taking out and re-installing Hassler front shocks on my '13

Post by Darren J Wallace » Tue Feb 19, 2019 11:53 am

Larry, your comment above was key to my decision :)
1913 Canadian Touring & 1905 Queen, both cars are 4 generation family owned cars

Post Reply Previous topicNext topic