MTFCA Forum

it is getting to be time to start planning our springtime auto. activities ... i spoke with Kevin Hammock this week regarding any changes in the Duncan swapmeet in March ... the only change is BIGGER ... the 2 north buildings are sold out and the building that was under construction last year is completed and will house an additional 100 plus spaces ... also outside spaces are increased due to the area used for construction access and staging is now available ... this meet is a general swapmeet that has added a seperate pre-war section ...this is much like the Chickasha meet with similar indoor facilities including comfortable heated indoor spaces with clean restrooms and showers ... many of the vendors that had attended the Chickasha meet were onsite as were additional regional vendors ... last years event had a good variety of mostly model T parts and several project as well as restored vehicles ...i had good sales and also purchased several items of interest including period Masonic items and a Rajo cylinder head a model B crankshaft and some early Dodge Brothers literature ...a good event for me and i also visited with many of the MTFCA membership including John Tanahill , the Temples ,Donny Brown ,John Steele and George House ...i recommend this meet to all active hobbyist and restorers ...an excellent buyer/seller environment in a comfortable , accessible , central location ...job well done Kevin ...thank you ...Gene French
P.S. i will start a "wanted to buy" Duncan Swapmeet section ... i am looking for a windshield frame for a 1931 Murry body Model A 4 dr. ( has slant windshield ) , 1900-1930 Masonic items , early 4 cyl. Dodge Brothers parts particularly 20" and 24" disc wheels and lockrings ...i will remind all that at a swapmeet you can see what you are buying ...many of us have been SCAMMED by sellers that claim to have a needed part or give an in-accurate description of an item or a very poor photo ...at a swapmeet you are the judge of the quality and suitability and worth of a part ... a swapmeet is just as much of a hobby event as going to a car show and bragging about your expensive paint job ...

What dates will this swap meet run?

Keith:
this is a 3 day meet March 26 thru March28 at the Stephens County Fairgrounds in Duncan,Ok. ...this is south of the Chickasha ,Ok, area with easy access of the interstate south of Ok. city and easy access to inside spaces ...a good event with clean facilities and good chow available from the High School band group ...i had good sales and was able to purchase some cool items for my projects ...hope to see many of the MTFCA membership there in March ...Gene French

have spoken with several regional hobbyist here in northern Colorado and also Wyoming there is a lot of interest in locating parts for their projects and way too many questions of "what will sell" ... my answer is " i don't know" ... BUT , you might try listing what items you have for sale and what items you want to buy ...this meet is approx. 750 mile each way for me and not an easy drive if weather is bad ... same can be said for most others ... and yes , i can probably be more productive here at home ...BUT , i do enjoy the meet and i have been able to view and purchase items that i may not have even known to exist ...i have made many contacts that have helped to locate parts for my projects and have assisted them in their projects or answered questions or shared philosophies ...if the decision to attend is based on economic gain only , then i would recommend that a person stay home ... if there is an interest in the hobby and preservation of automotive history and fellowship then this is an excellent opportunity to advance those values ...hope to see you all there , stay safe and warm ( currently a balmy -3 deg. F. ) Gene French

It is true that a lot of the Chickasha crowd has shifted to Duncan. Chickasha used to to an incredible swap meet, but it dwindled down each year for the last 8 years or so. I will be attending Duncan again this year with the hope of helping it grow into what Chickasha used to be 10+ years ago. I was at Duncan last year and did really well. I also got to catch up with lots of people that used to attend Chickasha. Please spread the word about the pre-war areas because Duncan has the potential to become what Chickasha used to be.

Mike Francis
Classtique Upholstery

Michael:
this meet should grow , the site is excellent and the meet organizer ( Kevin Hammock) has developed long term plan to host a general interest meet with a separate area for the earlier ( pre 1949) vendors ... i also did well on sales and met many new people to this meet ...i was also able to purchase items of interest and cores for re-building ...Gene French

Hope this can grow to the extend that Chikasha was in 2010 when I visited over the next couple of years so when situation become more normal in the US, one could consider to come over. And maybe bring a couple of other Ford guys with me (that use to go to Hershey).

Happy memories:

First time attending and I’m considering setting up this year. Is this considered a 3 day swap with set up Thursday morning, or Will vendor set up be Thursday evening like Chickasaw with Friday & Sat being the open swap day?

VinTin23 wrote: ↑

Sun Feb 01, 2026 5:56 am

First time attending and I’m considering setting up this year. Is this considered a 3 day swap with set up Thursday morning, or Will vendor set up be Thursday evening like Chickasaw with Friday & Sat being the open swap day?

Duncan, OK Swap Meet info here: https://www.duncanokswapmeet.com/

I will be attending again this year. I recommend this swap meet. I see potential for it growing each year. I did very well last year. Both buying and selling. For the first year to have the prewar added to the existing swap meet, I think it went very well. Kevin and his crew did great. As to the set up dates and time. It is a Thursday Friday Saturday swap meet. Last year we were allowed into the building and grounds after 5:00 PM Wednesday. Some folks did some setup Wednesday and then went to Motels. We set up Wednesday and we also camp on our spaces, so by 10:00 PM we were set up, popped up the rooftop tent on the truck, had supper, and took a nice hot shower. Others had small RVs or camped in the back of their trucks camper shell. There were several "campers" in the building. The building is heated. I would just check with Kevin about set up and camping. There was room right outside the building to park a camper or motorhome. But no hookups.
Here is my list of want items.
1. Pre WW2 camping items. Preferably 1920s to mid 1930s . Anything pertaining to Motor Camping
2. Model T accessories.
For sale items. Lots of T parts. And lots of just general prevwar items for all makes
3. And lots of pre war collectables and memrobelia.
Lots of folks know me. My load can have almost anything on it...

See ya'll there .........

spoke with Kevin Hammock this afternoon regarding times when vendors will be allowed onsite ... Wednesday afternoon after 5:00 vendors with LARGE trailers will be allowed to place their trailers ... Thursday morning at 7:00 for smaller vehicles ... this is done to reduce the clutter and allow access for LARGE vehicles ... looking forward to this meet and hope to see you all there ...Gene French

Bob:
thanks for posting the swapmeet flyer ... there were some interesting items and project cars last year ... there was a neat 1948 Ford 1/2 ton pickup that was hot rodded ... if it had a flat 6 i probably would have spoken with the seller... i had a 1946 when i was in high school , a flat 6 and 4 speed , NOT FAST ,but very reliable and good in the hills due to the very low rear axel ... also many good sheet metal parts and accessories for a wide range of vehicles ... overall a good general meet on the outside spaces and many good parts and projects in the inside ... i expect the same for this year with many people i have spoken to that are planning on bringing additional items for sale ...see you all in a few weeks ...Gene French

In the pre-war section, are the spots large enough to set up display and park your truck. I won’t have a trailer but will have few things that are heavy and would like to display off the back of truck.

Marty:
not sure of space dimensions , BUT ,i was able to park my F150 pickup and place my display table inline on a space and had room to place items along the side of the pickup ... i will have a small 8' trailer this year , but i have a total of 4 spaces in the north building ... see you all there ...Gene French

Marty:
i checked on the meet flyer to get dimensions for spaces ... flyer lists space sizes as: outside 10'x20' , inside as 10'x18' , covered 10'x20' , climate controlled? 10'x10' , RV hookups $30 per day ... hope this helps ... i know i have plenty of room ... space prices are : $35 outside , $45 inside and covered , $40 climate controlled ... SPACES are $10 MORE at the gate ... registration ends 10 days before the meet ...call Kevin Hammack @ 580-467-2471 for meet info. ( call before 8:00P.M. central time )... Gene French

Well, we almost have the trailer loaded. Will just have a few things to load the day before we leave. We are looking forward to another fun swap meet. I know a few folks going that did not make it last year. And everyone I know that went last year plans on going this year. .... If you want to help this swap meet survive and also to just help the hobby in general. Please show up. Throw some stuff in the back of your vehicle, get a space or two and come to the swap meet. It's a lot of fun .... Hope to see everyone soon .... Have fun and be safe ......