MTFCA Forum

The pair I found are pitted and bent to h*ll. Take it from here Steve.

Going to Shannon. Thank you

Send me a text with your contact info and address. I'll check my stash and get back to you tomorrow 951 805 092 eight.

The water based "cleaner" is worthless. Solvent based is the best.

Going to Dean in Kansas. Thank you Dean.

Going to Brent. Thank you

Acquired these recently. Look to be in very good condition with nuts. Bushing will likely need to be replaced. Price for the pair is $45.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

One outside oiler setup for the three dip pan. Very similar to the Ford Faithful with no name. Price is $45.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

Going to Rick. Thank you Rick.

Hi Scott. Sorry. Rick beat you to the punch. Thank you for your interest though.

An assortment of front radius rod parts NOS. Includes three late style tie rod yokes that accept the tapered ball (19-27). One tie rod yoke left side (13-19) and one straight shank ball (18-19). Price for all $40.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

One late model chrome plated steering column gear case in very good condition. Price is $50 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

One Ford script 11 tooth pinion in very good condition. Price is $50 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

Going to Charlie. Thank you

Thank you for the comments. Pistons have found a home. Going to Dean in Kansas. Thank you all.

I believe they take the standard 1/8 inch rings. They are pretty stout construction. They have not been available for decades. Not sure why the lack of interest. Maybe folks know something I don't. If so, they are welcome to share their opinions good or bad.

Going to Kenneth. Thank you

Going to Julius in Texas. Thank you sir!

Going to Charlie. Thank you

Going to Charlie. Thank you

#2 going to Dean in Kansas. Thank you Dean.

Just recently took apart a few more rear axles and found this beauty! One complete late style differential in very good condition. Price is $150.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

One very nice set of 26/27 transmission demountable bands with no wear on lugs and Ford script. Price for the set is $50.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

Neat heavy duty small drum emergency brake band set. These work great when new linings are installed. Includes anchor bolts and nuts as well as new springs. Price for the pair is $50.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

One set of 26/27 large drum emergency brake bands. Linings will need to be replaced. Much better than the reproductions. Price for the pair is $50.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

One complete set of "L style" Ford shackles. Although used, they are still in pretty good condition. New nuts also included. Price is $60.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

One set of early figure eight rear shackles in used condition. These still appear to have some life left in them. Much cheaper that a new set. Price is $40.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

One Hall Scott Ton Truck axle housing shifter. The arm is somewhat pitted and the end could use some repair. The rest of the unit is in very good condition. Including the plunger and clevis. Price is $50 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928 20260224_141918.jpg 20260224_141904.jpg

Two early driveshaft spools as described below. Shipping USPO Flat Rate is $9.50 each. Mark Chaffin (951) 805-0928

A. Early driveshaft spool with bumps and part # T191B $40.00

B. Early driveshaft spool with no bumps and no part number $50.00

Second housing pending to Charlie. Thank you.

Larry is correct.

Hi Scott. I have many. I'll send you one. You cover the shipping.

Going to Dean. Thanks Dean.

How about $100 plus shipping?

How about $40 plus shipping?

One set going to Mike. Thank you Mike.

One sold to Mark. Thank you Mark.

One set going to Ed. Thank you Ed.

Got it. I'll let you know.

Going to Michael.

Yup. It will indeed.

One more late style differential case complete and in excellent condition. Also includes an original standard ring gear in very good condition. Price is $200 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

One set of RayDay aluminum pistons .100 oversize. No pins. Standard pins are available from the dealers. Price is $50.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

One set of standard aluminum pistons .030 oversize with pins and rings. Price is $150.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

Large drum Ruckstell axle housing sold. Two small drum remaining. One Ruckstell. One Hall-Scott.

I can ship; however, shipping is expensive these days.

I have a couple of very good Ruckstell housings available. Small drum and large drum. Primed and ready to assemble. $300 each. Pick up preferred or i can deliver to Bakersfield. Mark Chaffin (951)805-0928

Going to Kurt. Thank you.

One complete early differential in excellent condition. Ready to install. Price is $150 plus $18.50 priority flat rate shipping. Mark Chaffin (951)805-0928

Give us or Snyder's a call. We will be happy to fill your order while supplies last.

You can order them separately.

Just a quick note to let folks know we have made another run of the 26/27 wire wheel lug nuts. They come in a set of twenty. You can also purchase them individually for the spare tire if you prefer. They are the same as the original lug nut to include polished cadmium plating. Although we are the so...

The Stevens tool in question grabs the inner ID of the bushing by means of a series of serrated edges. As you drive the tool downward, it tightens against the ID of the bushing. The bushing is then driven out. This is all done while the drum is supported by one of the circular fixtures.

One set going to Steve. Thank you Steve.

One set for T.J. in Texas. Thank you

One set to Dave. Thank you.

Thank you for the kind words Joe.

Several sets remaining at this price.

Those in the know can tell you it is near impossible to find a complete set. $995 per set plus shipping. Once they are gone, we will not be making any more.

.498 is stock size for original NOS bearings. With new axles and new sleeves, you can use bearings down to .490 and they will be superior to the solid bearings. Of course less wear is better. Tight cages are a must. Others may disagree. To each their own.

Going to Dean in Kansas. Thank you.

Going to Dean in Kansas. Thank you Dean.

Miscellaneous assortment of new parts offered as one lot. Retail value is over $175. Don't take my word for it. Look it up. Price for the entire lot is $65 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

An assortment of new carburetor parts offered as one lot. Retail value combined is over $250. Don't take my word for it. Look it up. Get the entire lot for $85.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

Great news! Thanks all for getting things worked out. We all appreciate the effort.

Crank handles going to Ed.

Sorry Scott. Parts have been sold.

These parts came from a recent estate sale. They were in a box together. Looks as if someone was putting an engine together and never completed the project. Parts included Jahn's standard pistons and rings. Standard valves and lifters. Includes springs and keepers. New crankshaft gear as well. Babbi...

Various parts as described below. Each will require an additional $18.50 shipping. Mark Chaffin (951)805-0928 20260122_132124.jpg Pan Arms NOS. All for $40.00 plus shipping SOLD 20260122_132018.jpg Pan support bracket sets (3). All for $40.00 plus shipping 20260122_131651.jpg 26/27 brake backing pla...

Going to Bill.

Unique aluminum high compression head with Ford script and 14mm plugs. Price is $450 plus domestic shipping. Mark Chaffin (951)805-0928

We have some still in stock. Give Dave a call Monday (951)226-7331

The cams are right and left. The arms are the same.

Yes. It is exactly the same tool as dad's. Probably the most useful of them all. Very rare and hard to find. Well worth the asking price.

This is an excellent piece of shop equipment to have. I'm curious. Do you have front bar and fixtures as well?

Radiator has been sold. Thank you

Seat skins have been sold. Thank you.

Please read the post above. All items are Pick Up Only. Please call to arrange pick up.

Used high radiator in good condition $150 SOLD

High Firewalls, gas tank with brackets, sidelights, early rear axle housings, 26/27 hood, radiator shell, 1915 hood former, early seat skins.

Assortment of engine block 1915 through 1927 $25 each

Complete 26/27 rear axle with brake shoes $150

Ton Truck Ruckstell assembly. Excellent condition $100

Time to do a little early spring cleaning at the garage. All items are pick up in Lake Elsinore. Mark Chaffin (951) 805-0928 20260107_102120.jpg Assortment of 21" demountable rims $75 each. 20260107_102137.jpg Four 24" 30x3 non demountable rims. Two good. Two very good. $75 each 20260107_102200.jpg ...

Last set going to Dean. Thanks all.

One set to Joshua.

Going to Charlie. Thank you

Front shackle set and pitman arm going to Rick.

Price reduced to $200 plus shipping.

Delco going to Chris.

Hubcap lot going to Bill.

Pulley going to Dean.

Going to Rich. Thank you all for your interest.

Oil pan brackets to Steve.

20251223_110539.jpg Oil pan support bracket set $20 plus $8.50 shipping. SOLD 20251223_110814.jpg Cast iron small crankshaft pulley with pin. No longer reproduced. Price is $30 plus $8.50 shipping. SOLD 20251223_112233.jpg Assortment of original used hubcaps. Price is $25 plus $8.50 shipping. SOLD ...

An assortment of miscellaneous parts as described below. Mark Chaffin (951) 805-0928 20251223_114803.jpg One very good complete set of Ford script "L" style shackles (17-23) with bushings. These are not currently reproduced. Price is $150 plus $8.50 shipping. SOLD 20251223_110928.jpg One set of Fron...

Moore auxiliary transmission for Model T passenger car. Complete with driveline. Prefer pickup at the garage in Lake Elsinore. Price is $250. Mark Chaffin (951) 805-0928

You could try carefully grinding the weld down flush with the top of the castle nut. Apply heat to the weld and try breaking the nut loose.

One set to Val.

Like Steve stated. New sleeves. New axles. No problem. Cleaned and properly installed. They will outlive us all. To each his own.

Even IF the rollers had .010 wear, still far superior to the solid roller bearings. Of course these do not have that kind of wear and the price is very reasonable.

Search found 2620 matches