MTFCA Forum

Had a small leak in mind I use two tablespoons of ground ginger and a cup of hot water it has not leaked the drop read this in a no repair manual it works

They have been on my car every since day one that's just another part of the Model T that gives character I wouldn't do without them

There are several different tools that make the job easier you need to find one that suits you I have some different one I would sale there no expensive good luck charlie from Ohio

I may have some I will check tomorrow

On hold pending payment

The shipping is $8 priority Mail charles Jenkins 84@ gmail.com 165 west possum road springfield ohio 45506

I have a tiger timer in the box the box is a little dirty but it looks new $25 Plus the ride

Thanks I would like to install one on my 24 coupe but don't want to cut the firewall there's a nice manifold available but how hard is the top part to come up with

I would like to see pictures of the insulation on one it looks like you have to cut the firewall to use it I'm not wanting to do that the heater that was in my 22 the register came through the floor

Looks like it will fit up ok what's the bottom on it still need to find the important part charlie from Ohio

I would be interested if I could see it with rings and glands on a block I have one that a straight edge fits on but the back is still dropped and doesn't fit the block right

My guess is not good

Use 30 weight Rotel year-round

Ford painted all fenders black until 1933 the first year they offered fenders body color was 1934

I think gaslight Auto parts in Urbana still carries them got some there a few months ago

I have two N O S one in the boxes say South Acton MASS made in USA also have one just says made in Japan

Got my gas gauge today great product and great workmanship if you own a Model T you need to invest in one of these thanks to Tim for doing this and thanks MTFCA

Tim are you shipping them yet I'm tied of lifting the seat and using a stick thanks Charlie

Do you need the hole shaft or just the gears

Do they all have to be Ford coils I have some setting on a shelf I will check them

One set is on hold pending payment

I have two pair of used running board step plates for sale $25 a pair for $45 for all four plus shipping these came off car several years ago but they're still in nice usable condition I can email or text pictures NO PMS charlesjenkins84@gmail.com thanks

Great job as always I would love to have one for my 24 coupe

I have two different pairs could send you pictures charlesjenkins84@gmail.com

Well thanks this is not my daily driver the stop leak worked ok it was a small leak only at times if it comes back I will call Berg's I have a 1932 coupe for the longer trips

I've used 3 new Berg's radiators in the past this car is a totally unrestored car the original radiator looks really good other than it just started a little seeping from the top haven't had time to investigate it further yet but if it's something that can just be easily patched I'm going to for now

My car still has the original radiator seems too cool okay but I've noticed lately that it is seeping a little bit radiator stop leak yes or no could it do more damage than good

Found the problem after help from Ron Patterson checked out the wiring it was okay so on to the generator that was it just installed a rebuilt one ready to go now thanks for all the help MTFCA Charlie

My car shows no charge when running will discharge when you turn the lights on before you ask I've tried two different generators two different cutouts the gauge is new and all new wiring I went over all the wiring three different times and it is correct according to the diagram this is the third on...

Take a compression check is the easiest way to check for a stuck valve

What is the width between screw holes

Thanks MTfCA it's sold pending payment

My phone is 937 408 2480 I have email back it's your if you want let you know

Phone is wrong 937-408-2480 I have had several people reply not heard back from no one yet maybe it's the guy try to sale his on my post ?

I don't do PM's text me or email please Charles Jenkins 84@gmail.com 937-498-2480

I would the generator if you would ship charlesjenkins84@gmail.com

I've had several replies on this intake first guy has first right of refusal and then I will go to the next guy if he doesn't take it thanks all Charlie

I think it's the high volume one but not sure I bought it from Chaffins there the makers of them some time ago just cleaning up time to move things not being used

This the one the dealers sale for 98.95 was on the car just long enough to warm up the motor to retorque the head $75. Plus shipping also a tiger timer in the box was on the car for a couple of minutes trying different ones to see if there's any difference didn't see any $40. in the box plus shippin...

45 mile per hour in a T with 25 mile per hour brakes with today's traffic is bad enough model A with better brakes. That being said nothing like a country road and a drive in your T

My car starting very easy I can even get a free start a lot of time I just wanted to know if the I timer is worth the money I only richen up the carburetor about a quarter turn when it first starts after about a minute I leaned it back down and has a professionally built carburetor coils and coil bo...

I already know that it doesn't require maintenance and I'm not asking questions about some other car I'm just trying to find out if anybody has used one and what they think of it this is the ninth Model T that I've owned I understand the workings of them I'm just simply want to know if the I timer i...

I already know that it doesn't require maintenance and I'm not asking questions about some other car I'm just trying to find out if anybody has used one and what they think of it

Would like to hear from people who have used one are they worth the money my car runs good but it needs to be richen up a bit to start and then you can lean it back down when it warms up just wonder if one of these might help on that THE NEW I TIMER

Try gaslight Auto parts in Urbana Ohio I get a lot of parts hair that the other dealer say they're out of 800-242-6491

If you were going to buy a rebuilt generator who does the best job and where would you purchase it

I just had the same thing laped valves new exhaust manifold and aluminum intake new carburetor all new exhaust rewired NOS timer new plug wire to rewire the car and no power I found a intake leak was leak on the front port my friends said you have a valve sticking well no all have 45 pound of compre...

O can text or email pictures there like the one on my late 23

If he doesn't get them I will Charles Jenkins 84@gmail.com

I have two aluminum fan hub $15 plus shipping Charles Jenkins 84@gmail.com

I have 3 different ones $10.00 plus shipping Charles Jenkins 84@gmail.com each or $25. for all no PM's

The one you have on is perfect

I have several if you can't find some there must be a dozens in my parts no PM's

I can make one I wanted a original

Wanted a original center hood rod to fit a tall hood email or text me Charles Jenkins 84@gmail.com thanks

Keep me posted on the deck lid lock I could use one of they both don't go thanks Charlie from Ohio

I have several Ford wrenches for sale $10 each text or email for a picture plus the cheeps way shipping Charlie

I have a set of brass windshield mounting brackets they sell for around $20 in the catalog I want $10 + $3 postage these fit 12 to 14 according to the catalog

Sold pending payment thanks MTfCA

F S security auto lock this is the one that fits the wheel in great shape with original key $95 plus shipping I can
email or text a picture no P M S thanks Charlie

Rock never got a email charlesjenkins84@gmail.com

Sorry it sold pending payment

F S ignition switch plate with Ford ammeter the faces faded a little bit but the switch is good and tight takes key number 70 I do not have a key $80. Shipped to your door can email or text pictures no P M S Charles Jenkins 84@gmail.com

If it's still for sale I would like to get it could do a postal money order out next day

I have 3 Axel and one drive shaft bearing these are original ones $50 plus shipping no PM's text or email please

100 mph with in a T no thanks $39500. For a T speedster no thanks

Is the new aluminum ring still available don't know if I will ever use it but I would like to have the option if I wanted to thanks for any help

I have 5 Kelsey I think in great shape for sale don't want to sale one at a time all for $250

Thanks go out tomorrow

I'm a buyer but I don't use PayPal postal money order

Not sure what year we.jad several early cars at one time $20. Plus shipping I can email you or text it says inside hancock

There picture on model T Ford club of face book

These are demountable same as the ones on my 24 coupe but I don't see Hayes

5 really good 30/3.5 rims $250 plus the cost of boxes and shipping can email pictures or text thanks Charlie

Sold thanks MTFCA

Damn phone MTFCA

Hubs are spoken for thanks MYFCA

Didn't get a email yet but I'm located in Springfield Ohio could Save-A-Lot on shipping if you're close I also have a decent pair of wires that I would consider selling

I have a pair of 2627 front wire wheel hub going to keep these for a project someday but due to some health problems it's time to let someone else own them i knocked a couple of the studs out of one because the threads were really damaged but I have new studs I also have the new dust cover which are...

This is a great copy the model T Ford car including fordson farm tractor latest edition $35 plus shipping I can text or email Charlie Charles Jenkins 84@gmail.com

Where did you send my V8 part to I got the brass cap not what I was supposed to get Charlie from Ohio

He needs to check prices really

Mark I need your address again so we can settle up on that floor register I need it to finish the manifold heater for my car Charlie from Ohio

Mike I sent you a message and told you a host of more money order was going out early Monday thanks Charlie

I would like to get v8 emblem

No but I have 5 nice light surface rust no sharp edges can text pictures there in Ohio one mile off interstate 70 price at 250 for all 5

I can text pictures no P Ms I don't get them all the time

I have 5 rims with light surface rust no heavy pitting I would consider selling seeing as they're extra but not interested in shipping if you get my area stop and take a look and make a decent offer thanks Charlie these are 30.35

Mark put me down for the no 4 set 09/25 Scandinavian

I go 40 plus shipping to keep as a spear

Says it's no longer available

Text you some pictures of 5 I have extras

Mark if you find another one I'm interested Charles Jenkins 84@gmail.com

I may have what you need will get some pictures tomorrow I'm in Springfield

Sure looks like a older restoration

I have a nice jack for sale $35. Plus shipping text me or email me Charles Jenkins 84@gmail.com I have pictures

Shipped today tracking number 950565810022214078

I have two different valve lapping tool can try or email pictures $35 each plus the ride Charles Jenkins 84@gmail.com

I will take it give you a call

Price with shipping to ohio

Search found 230 matches