MTFCA Forum

sent you a e mail, Bob

Found this on youtube
check it out, Bob
https://www.youtube.com/watch?v=65WfNZ0vKsA

This car is now listed on T BAY
Bob

Link to the car, Bob
https://www.ebay.com/itm/153947067004

Going fast, only a few sets left on this run, Bob

Sold, thank you, forum

40.00 or going to t bay
FORD SCRIPT N.O.S.

I have a lot of originals most are nos, Bob

The For script inlet is N.O.S. The bolts are new reproduction, comes with gasket
45.00 plus 8.50 postage
Bob
815-633-7244
modelt2001@comcast.net
no p m's please

Limited quantities on these sets of brass oil lamp doors with lens installed, comes with new pins to install 1915-16 but will fit all oil lamps 1915-27 dealers get 99.95-119.95 each for these we make them so there are a few sets on sale all 3 for 270.00 plus postage that's 90.00 each huge savings, g...

I also have one very close to that but not the same amount of drilled holes
see pictures, other than that looks the same, Bob

Brass horn tubing elbow that was used on the 1915 T's with the bulb style horn mounted under the hood.
original
great condition
45.00 plus postage
815-633-7244
modelt2001@comcast.net
no p m's please

Sold to Bob,

thank you Bob

Just got them back from the grinder, thanks for all the calls and we now have them, Bob

Going fast about six sets left, Bob

going to t bay, Bob

1926 short block with cam, oil tube, crankshaft
no visible cracks, oily
400.00
pick up in Loves Park Il
Bob
815-633-7244
modelt2001@comcast.net
no p.m.'s please

I like it, thanks for posting, Bob

A few photo's of the LED's note the reflector is a used un polished and you can see how bright these bulbs are, Bob

I can rebuild one for you, Bob

The leads are a lot longer and easier to run through the rubber hose, price is still the same 55.95 a pair with only 8.50 priority mail, these are selling quick, just got 20 pr. in. do not miss out threads onto your existing burner and no modifications needed 12 volt draws only 2 amps each 815-633-7...

I will check and get back with you on that, the nice thing is these only draw 2 amps where the others draw a lot more and they are just as bright or brighter and do not get warm and do not fall apart like the Hal. and cost is a lot better, Bob

Just got a new batch in, we are working on a small converter that will allow you to use a 6 volt battery to run these also, Bob

there are two types one with the flat bottom for 1925-27 and one with a lip on the bottom for 1909-24, I have one late one for sale and many early ones, Bob

any ideas, Bob

https://www.ebay.com/itm/193430284696

Just found this tiny dash mount rear view mirror
glass measures 4" x 1 1/4" from ball to base 5"
any ideas
Bob

Set of 1/64 o.s. solid push rods 50.00 per set plus 8.50 postage
modelt2001@comcast.net
815-633-7244 no p m's please
Bob

we only sell them in pairs, polished or non, these are made in pairs, Bob

Sold to Jim, Bob

problem with the ignition switch?

Yes he also drilled out the holes in the early hood former and firewall, Bob

Why do some people do things without asking questions? can you see the problem? Bob

A great story teller for your barn

I have some nos ones, Bob

Yes 1914 coil box, fenders, aprons, engine pans,running boards and hood and hood former are all new reproduction

1916 Has the wrong springs and wishbone but perches are correct, high head, early lamps and forks, tires look to be new and old 30 x 3 and 30 x 3 1/2 has a new hexagon steering wheel rim with brass spider, fender look to be early re pros or excellent originals, the man said the engine was rebuilt ( ...

I have alot of nos screws for sale if anyone needs them, Bob

I know this company made lamps for motorcycles but there is a left and right
looks like cowl lamps, carbide lamps 128 is the number on the Powell & Hanmer P&H tag on the bill of the lamp. has anyone any idea on what they would fit
yhey are about 6" i diameter
all brass
Bob

We are open but for how long we do not know, Governor is shutting down places like crazy, but we will still do mail orders and phone orders, Bob

How about 325.00

Sorry meant to pay belt drive, mind a little foggy with all that's going on, Bob

A very coll old sawmill with the pulley to run off a Model T or other stationary engine, great for shows also Thrasher y
375.00
815-633-7244
modelt2001@comcast.net
no p m's please
Bob

Looks close to the model A but has longer tube, any ideas? Bob

Did another batch 4 more for sale, Bob

Going on t bay
these would be great for open valve motor

A couple sets of N.O.S. Push rod guides one set is smooth bore
the other has oil groves
all are standard size
45.00 a set plus 8.50 postage
815-633-7244
modelt2001@comcast.net
no p m's please

ABOUT 10 1/2" X 53/4" VERY COOL ANTIQUE GAS TANK FOR VINTAGE HIT AND MIS ENGINE or test stand for motors also checking carburetors
SOLD
25.00 plus postage
815-633-7244
modelt2001@comcast.net
no p m's please

I will take the last 3 support bottom brackets # 12
Bob

I still have 2 left at the sale price, Bob

1 sold 1 left, Bob

I have it if you need it, just talked to him yesterday, Bob

165.00 or going to t bay

yes very few,5.00 pair

Just found this on a shelf and bead blasted it transmission main shaft Ford script mic's 0998 on shaft and .0934 on top no markings by key way or pin hole no markings of a bushing ever been ot it, top part has some small pitting but will not efect it 180.00 plus postage 815-633-7244 modelt2001@comca...

How about 30.00 er set

found 1 more set, Bob

2 left sale ends at noon

3 Hours left still have a few

Sale ends tomorrow, Bob

I have 2 Vaporizer to N/H linkage kits on sale 1 sold 1 left
this kit lets you use your existing over the head linkage instead of punching a hole in your block
ob sale 35.00 plus postage
only 2 kits on sale
815-633-7244
modelt2001@comcast.net
no p.m.'s please

call me. Bob
815-633-7244

https://www.ebay.com/itm/193381532595
here is parts you will need, Bob
hard to find

T.J You got it, Bob

3 sold 6 left, Bob

I just finished up a few rebuilt starter Bendix's at sale price 65.00 with no core charge
actual postage
Bob
modelt2001@comcast.net
815-633-7244
no p.m.'s please

5 Sets only of 1909-25 Kevlar transmission bands
special 90.00 set plus postage
Bob
Bob
modelt2001@comcast.net
815-633-7244
no p.m.'s please

Have had these a long time
N.O.S. T-2559 Brake cam bushings
these will need to be reamed for cam
3.00 pair
we only ship small items by priority mail no 1st class
actual postage
Bob
modelt2001@comcast.net
815-633-7244
no p.m.'s please

Had these for many years
N.O.S. T-3327-B Transmission drive plate bushings
6.50 each plus postage
Bob
modelt2001@comcast.net
815-633-7244
no p.m.'s please

Looks like the back half that goes to frame is missing, Bob

set of 4 N.O.S. T-2529 Steel thrust washer plates for the differential
20.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net
no p.m.'s please

Bob's sale item
3 days only
T-2528 brass thrust washers retail 12.95
sale 10.00 each plus 8.50 postage
save on postage and buy two sets
these are made in U.S.A.
Bob
815-633-7244
modelt2001@comcast.net
no p.m.'s please

great deal will be going to t bay in the morning, Bob

Big discount on this new transmission brake drum for 1909-25
machined for lug shoes
dealers get 825.00 or more
special 775.00 plus postage
815-633-7244
modelt2001@comcast.net
no p.m.'s please

they called, 1 pr. sold, Bob

four types here

I will let everyone know in a few days if he does not answer, Bob

About mid January someone e mailed me looking for original top prop nuts, I just found a nice pair, Bob

Solid brass spray needle top that uses a pin to hold it to the spray needle, Bob

Andy, is that the bore in the main leaf, also the bushing in the main leaf is it solid or split? Bob

Just going through the box of carburetor parts and also found this one, any ideas? Bob

I just bought some rare carburetor parts and know what most of them are but this one has me at a lost, does anyone know if this is for the early Kingston model L ?
Thank you, Bob

Thanks Andy, Bob

I have the perch and bushing but no main leaf for the spring to go by, Bob

If you measure both perches, the same bushing was used, the spacer takes up for the short perch, thank you, Bob

Does anyone have the o.d. and I.d. dimensions on the rear spring and perch bushings for the TT truck, I think the spring one is split and the perch ones are not, 2 different O.D.'S thank you, Bob

F S N.O.S. Tie rod end yokes
The were used from October 1917-1921
there are 7 of these for sale
30.00 each plus 8.50 mail in the U.S.S.
815-633-7244
modelt2001@comcast.net
no p m's please

F S N.O.S. Tie rod end yokes
The were used from January till April 1917
there are 15 of these for sale
35.00 each plus 8.50 mail in the U.S.S.
815-633-7244
modelt2001@comcast.net
no p m's please

F S N.O.S. Tie rod end yokes
The were used from March 1914 till December 1916
there are 5 of these for sale
40.00 each plus 8.50 mail in the U.S.S.
815-633-7244
modelt2001@comcast.net
no p m's please

We just talked to the manufacturer and they told us 6 more weeks before the copper head gaskets will be ready, Bob

We just talked to the manufacturer and they told us 6 more weeks before the copper head gaskets will be ready, Bob

Not a Model T but very old Rail Road luggage wagon, they came to pick it up and look where we had to put it, thank G for fork lifts, Bob

I just got off the phone with Russ Potter, and he just got great news
he is CANCER FREE
Just letting you know
cograts Russ
Bob

A friend called me up and said he listed this super rare light for 1915-16 centerdoor, what do you think, I have never seen one like this, Bob

I have a few, Bob

Still have a few sets left, Bob

What are the dimensions? Bob

I will take these, Bob
#8 Speedometer drive heads and chain links $10.00
#9 Speedometer drive cable housing and fittings $25.00
#10 Speedometer drive cable housing and fittings $25.00

going to t bay, Bob

I will take it, Bob
sent you a e mail

I will take the lot, sent you a e mail, Bob

Search found 656 matches