MTFCA Forum

Could I see it with cover off?

I'm getting a snapping noise in the transmission when I depress the pedal to back up any ideas? It will still backup and forward works good, it only does it one or two times and still backs up

thanks for all the ideas, I watched a video where the guy used a garbage bag over the wheel and used his hands and pressed both beads at the same time, I haven't heard here where anyone has tried both beads at one time,anyone ever try that?

Yes tires are 30x3 1/2, so you don't use flaps and pry on both beads at same time?

I just got 4 new tires and tubes,started changing today after finally got one done blew it up it sat for about ten minutes and tube exploded I must have twisted it for it to do that,so I put another new tube in and couldn't blow it up took it back out and I pinched it with spoon. I just watch a vide...

got to mount 4 new tires, is it advisable to put some sort of lube or WD40 on beads to make them slip on easier and seat the bead easier?

correction on shipping cost, on earlier post I stated less than half cost, that's doing math quickly in my head ,not 100% accurate, Langs was $140.00, Lucas was $82.00 still a good savings that I couldn't turn down, same tire same price.

I just ordered from Lucas Tire shipping was less than half of Langs and they do not charge sales tax so I saved a bunch of $$$$

Upstate near Utica

where can you order new tires without having to take out a mortgage to pay for shipping?

I just finished a valve job on my T, I needed to put the .030 oversized valve stemmed valves in and didn't want to remove the engine. I had this Jig made at local machine shop to do the drilling and reaming, it rest down in the block in the valve cavity, it is made to fit snug in the block shoulder ...

Thanks everyone, found correct bracket

The horn on my T died, I bought a Sparton #9 on ebay but the bolts on the cover are farther apart than the old one and don't fit the bracket, my bracket the holes are 2 inches apart,the new horn they are 2 1/2 inches apart anyone know where I can get a bracket to fit this horn?

Has anyone ever tried to mount a new style wishbone on old style spring perch? I have old style and there is 3/4 inch of threaded shank below the axel, would like to not change them if I could

I'm in search of front wishbone for my 1923 pie wagon, hopefully in New England area to save on shipping

A while back I bought the 14 mm plug adapters but Lange don't tell you what plug you should use anyone using a 14 mm plug if so what make and number

Just seen in the paper Bill Randall owner and operator of the Rome Horn Shop in Rome NY passed away, I talked to his wife about three weeks ago, she said he was not doing well, I talked to him last fall at the Whampsville Show, he was struggling back then, was a good guy

Bills health has for ed him to retire

Any other repairman?

Does anyone know if Larry Rose at Moonshine County Horns is still in business ? He has not answered my email and I called the number on his card and get a recording the number is not available

I had two small cracks one in each windshield,I called Langs they don't handle glass they said have it cut at a local glass Co. So I did installed them both and they car has sat since not even started,went out today and lower window developed a crack just sitting there, must be a place that sells th...

Been a lot of threads about oil,what about gas,should we be running non ethanol or 10% ethanol? And what about lead additive, I have a older Ford tractor that tractor people tell me I have to add lead additive, should we also do it in the T?

I figured it out when I was using a test lead and closing the circuit I only had the button removed wires were still hooked to back section of switch I removed wires totally from switch and touched them together and it works great need new switch

I have been having horn problems for two years it has low rpm,s and sometimes didn't work at all,two years ago sent it for testing and fixing got it back same problem last fall sent it to what was supposed to be the best horn shop around got it back during winter took it into the shop and tried it d...

The engine had a total rebuild about 3000 miles ago

I have a five quart container of 10-30 conventional oil not blended is this safe to put in the T