MTFCA Forum

Sent you an email

Sold to Jesse pending payment. Jesse I sent you an email reply.

NEW price $25 and $10 shipping

Sold to Doug awaiting payment

Did not receive any email. Sent you an email via the forum.

The middle one was only shown in the picture to show the difference between the early and late double socket orientation.

Sold to Gary

Sold to Dennis awaiting payment

How about a nice set of 1926 Michigan license plates for your car. These can be registered and run as original plates. These were redone by Duane Wells many years ago. $125 and $15 shipping. Email me at markpaulagember AT aol dot com

Here is a good condition original 1926 copywrite Ford Manual that came with the car when new. It does have a couple of pages coming loose from the center staples. Otherwise in good condition. NOW $25 and $10 shipping. Email me at markpaulagember AT aol dot com

Just as stated. A single 1926 Michigan license plate that is original unrestored. $50 and $10 shipping. Email me at markpaulagember AT aol DOT com

A brand-new Nickel radiator cap. These are not in stock at the venders. $25 and $10 shipping. Email me at markpaulagember AT aol DOT com

Model T 1926/27 Walker stamped ratchet style jack T2343. This jack works as it should. These are not listed often and are hard to find. $150 and $20 shipping. Selling as extra to my needs. Email me at markpaulagember AT aol dot com

This jack handle T2344 fits a ratchet type T2343 Ajax or Walker jack. $25 and $10 shipping. Selling as extra to my needs. Email me at markpaulagember AT aol dot com

Last Picture

This kit is for a 1920 or later Ford Model T and includes all the original Ford Script tools! Here is what is included: T1349 Hub cap wrench, T1387 Adjustable wrench, T1903 Pliers, T1917 Double end wrench, T2335 Cylinder head wrench, T2336 Oil Cloth Tool Roll (reproduction), T2336 Tool Bag (reproduc...

Great condition original single brass tube Ford script tire pump. (1920-27) Rebuilt by Vern Cambell several years ago. $150 and $25 shipping. Email me at markpaulagember AT aol dot com

Ford script T-2839 Wire wheel lug nut wrench. This is the original wrench supplied by Ford when you got wire wheels. $75 and $15 shipping. Email me at markpaulagember AT aol dot com

1 pair are still available

Reposted one time

Email sent

Sent you an email

sold to Jack

To the top

Lower price in add

To the top

To the top

To the top

Sold to Ed awaiting payment

Sold to Ed awaiting payment

Sold to Steve awaiting payment

Found a second pair of Logo Lights LED Headlamp bulbs. They work on 6 or 12V for both Model T’s and A’s. NEW $55 shipped to your door. Email me at markpaulagember AT aol DOT com

Sold to Bob awaiting payment

Both left and right NEW front outer wheel bearings. 2 piece with threaded insert. The difference between regular bearings and these is that these are two piece bearings with a threaded insert pressed into a roller bearing. $65 shipped to your door. Email me at markpaulagember AT aol DOT com

Both sets sold awaiting payment

Tim sent you two emails

Sold to Bill awaiting payment

Sold 1 pair, 2 are available

Sold 1 pair to Tad awaiting payment

Holding for Jeff

Holding 1 set for Jeff

Sold to Jeff awaiting payment

Sold to Jesse awaiting payment

You are correct - fat fingered it. Updated posting. Thanks Melba

One sold to Ed. One still available.

Slightly used with little to no wear and tight cages. 2 sets area available. $65 shipped to your door. Email me at markpaulagember AT aol DOT com

Wheel Bearing - Front Left Outer (Timken 09075 -T206B) - (RH Threads) | NEW in box. $70 shipped to your door. Email me at markpaulagember AT aol DOT com

Replacement 5-1 gear set for 1926/27 original. This set includes the correct T-3518 pins for this gear set. $55 plus $10 shipping. Email me at markpaulagember AT aol DOT com

Nice tight full assembly with new spring, bolts, and key. $60 with $10 shipping. Email me at markpaulagember AT aol DOT com

6 fluted original steel oil cap. Plain top. (1915-16) $25 shipped to your door. Has intact screen. Email me at markpaulagember AT aol DOT com

This set of vintage wrenches contains: A folding oil check rod, easy access reverse adjusting wrench, ratcheting band adjuster, two coil adjusting wrenches, and a spark plug cleaning wrench. $50 shipped to your door. Email me at markpaulagember AT aol DOT com

This Magneto Meter will contently display your magneto voltage. These are no longer produced. $50 shipping to your door. Email me at markpaulagember AT aol DOT com

T2343 Screw Ford Script in good working condition. $35 plus $15 shipping. Email me at markpaulagember AT aol DOT com

I have 4 headlamp sockets for 1917-27 Model T’s. These are the common style with the focus screw to the side of the light bulb. $30 shipped for all 4. Email me at markpaulagember AT aol DOT com

I have 4 headlamp sockets for 1915 or 1916 Model T’s. These differ from the later ones in that the pins are 90 degrees off. This was done to align the filament horizontally to allow the headlamp to be focused. Note the later socket in the middle of the picture. The focus screw for the 1915/16 is at ...

A pair of Logo Lights LED Headlamp bulbs. They work on 6 or 12V for both Model T’s and A’s. NEW $55 shipped to your door. Email me at markpaulagember AT aol DOT com

This is all the wheel bearing races you need for the front wheels on a Model A. These are brand new Timken races. $50 shipped to your door. Email me at markpaulagember AT aol DOT com

Here is a grouping of fasteners. It includes the following sets: T3103S Motor crankcase lower cover bolts, T2990 Motor castle nuts, T2741S Radius rod mounting bolts, T2729BMB Radius rod cap mounting bolts, T4804MB Rear fender to frame mounting bolts 1909-25 two sets, T2547 Rear radius rod mounting b...

APCO Spring Loaded Tie Rod Ball Cap – Steel. These are no longer being produced. Two available in slightly used condition. $35 each with $10 shipping. Email me at markpaulagember AT aol DOT com

2 Brass and 1 Nickle w/case Shrader air pressure gauges. Also 3 Ford Motor Company modern air pressure gauges. $40 shipped to your door. Email me at markpaulagember AT aol DOT com

Sold to Ellis

More Pictures. Comes with a nice cover.

This is a fully restored HCCT that looks and works perfect. This was restored by Ron Patterson. HCCT Handbook is included. $1500. Can deliver to Luray. Email me at markpaulagember AT aol DOT com

Sent you an email

Sent an email this morning for purchase at 7:34 CDT and am awaiting a reply.

These were used in the 1917-22 Ford Model T non starter cars.

Page 254 of Bruce's book, "The Car That Changed The World" shows a steering column mounted, combination horn button / light switch as used on 1918 - 1922 cars.

See the two Ford Switches with the knurled knob which turns to actuate the headlamps and depress for the horn.

SOLD awaiting payment

back to the top

This is a Presto Rear Hub puller for a Ford Model T. It is in good condition and works as it should. All threads are crisp and clean. $40 and $10 shipping. Email me at markpaulagember AT aol DOT com

SOLD

This was never used and is excess to my needs. The carburetor was fully rebuilt by Bruce Compton. $325 shipped to your door. Email me at markpaulagember AT aol DOT com

Two sold one set left

One set sold awaiting payment

Sold awaiting payment

I had some ignition coils rebuilt a couple years ago by the Coilman. I never used them and they are extra to my needs. They have been recently tested on an HCCT. The wooden cases are OK but not the best. Three sets are available at $320 a set of 4 sent to your door (USA). Email me at markpaulagember...

Last picture

I purchase this for a spare although I never needed to use it and is now extra to my needs. It was a short block which was disassembled, nothing was stuck and came apart easily. Cast iron pistons and a standard camshaft were observed. Cylinders appeared to be standard with slight grooves from where ...

Sold awaiting payment

Sold awaiting payment

Better price and changed add

Better price and changed add

Better price

Better price

Better price

To the top

Sent you both an email. Sold awaiting payment.

Any takers at $30 each + $15 shipping?

Now $25 a set shipping included

Price reduced to $50

All spark and throttle arms have been sold. Thanks MTFCA

Sold awaiting payment

Sold awaiting payment

Sold awaiting payment

Sold awaiting payment

How about $60 shipping included

To the top

Back to the top

All 3 - 25.5” carburetor adjusting rods $20 plus $10 shipping. Email me at markpaulagember AT aol dot com

Sediment bulb handle is free and plug with screen removes easily. $25 + $10 shipping. Email me at markpaulagember AT aol dot com

Short straight style Spark Rod Lever NOS 1909-27 Ford Script (4 available) OR Throttle Rod Lever T-947 1915-25 NOS (5 available) | $15 each + $5 shipping. Email me at markpaulagember AT aol dot com.

Search found 173 matches